Vente-unique Pascal MORABITO FRALYN Wall-Mounted Dressing Table with Mirror and LEDs

1. Sissejuhatus

Thank you for choosing the Vente-unique Pascal MORABITO FRALYN Wall-Mounted Dressing Table. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Pilt 1.1: läbiview of the FRALYN Wall-Mounted Dressing Table and Mirror.

2. Ohutusalane teave

• Järgige alati täpselt kokkupanekujuhiseid. Vale kokkupanek võib põhjustada ebastabiilsust ja vigastusi.
• Ensure the wall you intend to mount the dressing table on is structurally sound and capable of supporting the weight (approximately 36.85 kg) plus any items placed on it. Use appropriate wall anchors for your wall type (e.g., concrete, drywall, studs).
• Lämbumisohu vältimiseks hoidke väikesed osad ja pakkematerjalid lastele kättesaamatus kohas.
• Do not overload the drawers or the surface of the dressing table. The maximum supported load is 20 kg.
• Exercise caution when handling the mirror to avoid breakage and injury.
• Disconnect power before performing any maintenance on the LED lighting system.

3. Pakendi sisu

Enne kokkupanekut kontrollige, et kõik allpool loetletud komponendid oleksid olemas ja kahjustamata. Kui mõni osa on puudu või kahjustatud, võtke ühendust klienditoega.

• Dressing table unit (MDF and particle board, melamine finish)
• Mirror with integrated LEDs
• Two (2) sliding drawers
• Assembly hardware (screws, dowels, brackets, etc.)
• Wall mounting hardware (specific to wall type may need to be purchased separately)
• Kasutusjuhend

4. Seadistamine ja installimine

This dressing table requires self-assembly and wall mounting. Two people are recommended for safe assembly and installation.

4.1. Kokkupanemisetapid

1. Pakkige kõik komponendid lahti ja asetage need puhtale ja pehmele pinnale, et vältida kriimustusi.
2. Follow the detailed assembly diagrams provided in the separate assembly guide (if included) or the visual instructions below to construct the main dressing table unit.
3. Assemble the two drawers, ensuring the sliding mechanisms are correctly installed.
4. Attach the drawer slides to the main unit.

4.2. Seinakinnitus

1. Determine the desired height for your dressing table. Ensure it is comfortable for use while seated.
2. Mark the drilling points on the wall according to the mounting bracket positions on the back of the dressing table unit. Use a level to ensure accuracy.
3. Drill pilot holes at the marked points. Use appropriate drill bits for your wall material.
4. Insert suitable wall anchors into the drilled holes.
5. Secure the mounting brackets to the wall using the provided screws or appropriate wall screws.
6. Carefully lift the assembled dressing table unit and hook it onto the wall-mounted brackets. Ensure it is securely seated and level.
7. Mount the mirror above the dressing table unit. Connect the LED power cable to a suitable power source.

Image 4.1: Assembly diagram showing dimensions and drawer structure.

5. Kasutusjuhised

5.1. Sahtlite kasutamine

The FRALYN dressing table features two spacious sliding drawers. To open, gently pull the handle. To close, push the drawer back until it is fully recessed. Avoid forcing the drawers, especially if they feel stiff, and ensure no objects obstruct their movement.

Image 5.1: The dressing table with drawers open, illustrating storage capacity.

5.2. LED valgustus

The mirror is equipped with integrated white LED lighting. Connect the power cable to an electrical outlet. The LEDs are typically controlled by a switch located on the mirror frame or power cable. Refer to the specific LED unit instructions for detailed operation if a separate guide is provided.

Image 5.2: The dressing table with its LED mirror illuminated, enhancing the room's ambiance.

6. Hooldus

6.1. Puhastamine

• For the melamine-finished surfaces, wipe with a soft, damp lapiga. Vältige abrasiivseid puhastusvahendeid või karme kemikaale, mis võivad viimistlust kahjustada.
• For the mirror, use a standard glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
• Tolmu kogunemise vältimiseks pühkige regulaarselt kõiki pindu tolmust.

6.2. Üldhooldus

• Kontrollige regulaarselt kõiki kruvisid ja liitmikke, et need oleksid kindlalt kinni. Vajadusel pingutage uuesti.
• Avoid exposing the dressing table to direct sunlight or extreme temperature changes, which can cause warping or discoloration.
• Ärge asetage kuumi esemeid otse pinnale ilma kaitsmata.

7. Veaotsing

• Sahtlid on jäigad või ei libise sujuvalt: Check for obstructions in the drawer slides. Ensure the slides are properly aligned and lubricated if necessary. Verify that the assembly screws are not overtightened, causing distortion.
• LEDs are not working: Ensure the power cable is securely plugged into a working electrical outlet. Check the switch for the LEDs. If the issue persists, consult a qualified electrician.
• Dressing table feels unstable after mounting: Recheck all wall mounting points and ensure appropriate anchors were used for your wall type. If unsure, consult a professional for secure installation.
• Scratches or minor damage to surface: For minor scratches, furniture repair pens or touch-up kits designed for melamine finishes may be used.

8. Tehnilised andmed

9. Garantii ja tugi

For information regarding warranty coverage, please refer to the purchase documentation or contact your retailer. For technical assistance, missing parts, or any other inquiries, please contact Vente-unique customer support through their official website or the contact details provided at the point of purchase.