Steinbach Poolstar Poolrunner S63 Automatic Pool Cleaner User Manual

Sissejuhatus

This user manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Steinbach Poolstar Poolrunner S63 automatic pool cleaner. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Poolrunner S63 is designed to automatically clean the floor of your pool, saving you time and effort. It is suitable for pools up to 18 m² and also compatible with saltwater pools up to 25 m² of floor area.

Ohutusjuhised

Vigastuste või seadme kahjustuste vältimiseks järgige alati järgmisi ohutusjuhiseid:

• Enne hooldus- või puhastustöid veenduge, et toiteallikas on lahti ühendatud.
• Ärge kasutage puhastit, kui toitejuhe või pistik on kahjustatud.
• Hoidke lapsed ja lemmikloomad basseini lähedal, kui puhasti töötab.
• Only use the original charger and power adapter provided with the unit.
• Do not use the cleaner in water temperatures outside the specified range of 10°C to 35°C.
• Avoid operating the cleaner in ambient temperatures outside the range of 10°C to 40°C.
• Never attempt to disassemble or repair the unit yourself. Contact qualified service personnel.

Toode läbiview

The Steinbach Poolstar Poolrunner S63 is an advanced robotic pool cleaner designed for efficient floor cleaning. Below are its key components and features:

Joonis 1: The Steinbach Poolstar Poolrunner S63 automatic pool cleaner. This image shows the overall design of the robotic cleaner, featuring its white and dark grey body, four wheels, and a central handle for easy retrieval.

• Põhiüksus: The core body housing the motor, pump, and filtration system.
• Rattad: Four robust wheels for smooth movement across the pool floor.
• Jet Nozzles: Located at the front and rear, these nozzles propel the cleaner and ensure effective cleaning by stirring debris.
• Juhtseade: An external unit with a power cable for controlling the cleaner's operation.
• Dirt Collector: An internal compartment designed to collect debris and dirt from the pool floor.

Joonis 2: The Poolrunner S63's movement is controlled via water jet nozzles. This image highlights the cleaner's ability to navigate the pool floor using directed water propulsion.

Joonis 3: The external control unit with its power cable. This unit manages the cleaner's functions and connects to the main power supply.

Joonis 4: Accessing the large dirt collector. This image shows a hand pressing a latch to open the compartment where collected debris is stored, indicating ease of access for cleaning.

Seadistamine

1. Lahtipakkimine: Eemaldage pakendist ettevaatlikult kõik komponendid. Hoidke pakend alles edaspidiseks ladustamiseks või transportimiseks.
2. Esmane laadimine: Before first use, fully charge the Poolrunner S63. Connect the control unit to a power outlet and then connect it to the cleaner. The charging indicator on the control unit will show the charging status. A full charge typically takes 5-6 hours.
3. Paigutus basseinis: Gently lower the Poolrunner S63 into the pool. Ensure it sinks to the bottom completely before activating. Avoid dropping the cleaner into the water.
4. Toiteühendus: Once the cleaner is submerged, connect the control unit to a suitable power outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.

Kasutusjuhised

The Poolrunner S63 is designed for simple, automatic operation:

1. Puhastaja käivitamine: After setup, press the ON/OFF button on the control unit to start the cleaning cycle. The cleaner will begin its automatic cleaning pattern across the pool floor.
2. Puhastustsükkel: The cleaner operates for a predetermined cycle duration, typically around 40 minutes, as observed by users. It navigates the pool floor using its powerful jet nozzles to dislodge and vacuum debris.
3. Optimaalsed tingimused: For best results, ensure the pool water temperature is between 10°C and 35°C, and the ambient air temperature is between 10°C and 40°C.
4. Toimingu peatamine: To stop the cleaner, press the ON/OFF button on the control unit. Carefully retrieve the cleaner from the pool using its handle.

Joonis 5: The Poolrunner S63 actively cleaning the pool floor. This image demonstrates the cleaner submerged and performing its automated cleaning function.

Hooldus

Regular maintenance ensures the longevity and efficiency of your Poolrunner S63:

• Emptying and Rinsing the Dirt Collector: After each cleaning cycle, or when the dirt collector is full, remove it from the unit and empty the collected debris. Rinse the collector thoroughly with clean water.
• Roboti puhastamine: Pühkige puhastusseadme välispind pehme lapiga puhtaks.amp cloth. Ensure no debris is lodged in the wheels or jet nozzles.
• Filtri hooldus: If your model includes a removable filter, rinse it regularly to maintain optimal suction power.
• Hoiustamine: Kui seadet pikemat aega ei kasutata, puhastage see, veenduge, et see oleks kuiv, ja hoidke seda jahedas, kuivas ja otsese päikesevalguse ning äärmuslike temperatuuride eest kaitstud kohas.

Veaotsing

Siin on mõned levinud probleemid ja nende võimalikud lahendused:

Kui teil tekib probleeme, mida siin ei ole loetletud või kui pakutud lahendused probleemi ei lahenda, võtke ühendust klienditoega.

Tehnilised andmed

Garantii ja tugi

The Steinbach Poolstar Poolrunner S63 comes with a warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Steinbach websaidile.

For technical support, spare parts, or any inquiries regarding your product, please contact Steinbach International customer service. Contact information can typically be found on the manufacturer's websaidil või ostutšekil.

When contacting support, please have your model number (061007AV) and purchase details ready.