Verizon Ellipsis Jetpack MHS800L mobiilse WiFi leviala kasutusjuhend

Sissejuhatus

The Verizon Ellipsis Jetpack MHS800L is a compact and portable 4G LTE mobile Wi-Fi hotspot designed to provide internet access for multiple devices on the go. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Jetpack.

Pilt: Esikülg view of the Verizon Ellipsis Jetpack MHS800L, displaying its compact size and the OLED screen with network status indicators.

Alustamine: seadistamine

Pakendi sisu

Veenduge, et teie pakett sisaldab järgmisi esemeid:

• Verizon Ellipsis Jetpack MHS800L device
• Aku
• USB laadimiskaabel
• Power Adapter (may vary)

SIM-kaardi ja aku sisestamine

1. Locate the battery cover on the back of the Jetpack. Gently slide or lift the cover to remove it.
2. If a SIM card is not pre-installed, carefully insert your Verizon 4G LTE SIM card into the designated SIM card slot. Ensure the gold contacts face down and the notched corner aligns correctly.
3. Sisestage aku selle pesasse, joondades kontaktid.
4. Pange aku kate tagasi, veendudes, et see klõpsatusega kindlalt paika lukustub.

Pilt: Tagasi view of the Verizon Ellipsis Jetpack MHS800L, indicating the area where the battery and SIM card are typically accessed.

Seadme laadimine

Before first use, fully charge your Jetpack. Connect the USB charging cable to the Jetpack's charging port and the other end to the power adapter. Plug the adapter into a wall outlet. The OLED display will indicate charging status.

Sisse/välja lülitamine

• Sisselülitamiseks: Press and hold the Power button (usually located on the side or top edge) until the OLED display illuminates.
• Väljalülitamiseks: Press and hold the Power button until the "Power Off" message appears on the display, then release.

Seadme kasutamine

Connecting Devices to the Jetpack

The Jetpack allows up to 8 Wi-Fi enabled devices to connect simultaneously.

1. Ensure your Jetpack is powered on and has an active 4G LTE connection.
2. On your Wi-Fi enabled device (laptop, tablet, smartphone), open the Wi-Fi settings.
3. Scan for available Wi-Fi networks. The Jetpack's network name (SSID) will typically be displayed on its OLED screen or on a label inside the battery compartment.
4. Select the Jetpack's SSID from the list.
5. Enter the Wi-Fi password (security key) when prompted. This is also usually displayed on the Jetpack's screen or label.
6. Your device should now be connected to the internet via the Jetpack.

Checking Data Usage and Status

The 0.9-inch OLED display provides real-time reporting of data usage and device status.

Pilt: Lähivõte view of the Jetpack's OLED display, showing signal strength, battery level, and network type (Verizon 4G LTE).

• Signaali tugevus: Bars indicate the strength of the 4G LTE cellular signal.
• Aku tase: An icon shows the current battery charge.
• Ühendatud seadmed: An icon or number may indicate how many devices are currently connected.
• Andmekasutus: The display can cycle through screens to show current data usage. Refer to the on-screen prompts or device menu for navigation.

WPS (Wi-Fi Protected Setup) kasutamine

WPS allows for easy connection of compatible devices without manually entering the password.

1. On the Jetpack, navigate to the WPS option via the device's menu or by pressing a dedicated WPS button if available.
2. Activate WPS on your client device within two minutes.
3. Seadmed ühenduvad automaatselt.

Hooldus

Aku hooldus

• Vältige aku kokkupuudet äärmuslike temperatuuridega.
• Ärge torgake, võtke lahti ega lühistage akut.
• If the device will not be used for an extended period, store it with a partial charge (around 50%) in a cool, dry place.

Puhastamine

Pühkige seadet pehme, kuiva ja ebemevaba lapiga. Ärge kasutage vedelaid puhastusvahendeid ega aerosoole.

Tarkvaravärskendused

Periodically check for software updates for your Jetpack. Updates can improve performance, add features, and enhance security. Updates are typically managed through the device's web interface or automatically pushed by Verizon.

Veaotsing

Tehaseseaded

A factory reset will restore the Jetpack to its original settings, including Wi-Fi name and password. This should be used as a last resort for persistent issues. Consult the device's specific instructions for the reset procedure, which often involves holding a small reset button or navigating through the device's menu.

Tehnilised andmed

Ohutusteave

Please read and follow these safety guidelines to ensure safe operation of your Jetpack:

• Ärge jätke seadet vee ega liigse niiskuse kätte.
• Vältige äärmuslikke temperatuure, otsest päikesevalgust või soojusallikaid.
• Kasutage ainult heakskiidetud laadijaid ja tarvikuid.
• Ärge proovige seadet ise lahti võtta ega parandada. Pöörduge kvalifitseeritud hooldustöötaja poole.
• Hoidke seadet meditsiiniseadmetest eemal, kuna see võib nende tööd häirida.

Garantii ja tugi

This product is sold as an Amazon Renewed item. Amazon Renewed products are professionally inspected and tested to work and look like new. They are eligible for replacement or refund under the Amazoni uuendatud garantii kui te ei ole oma ostuga rahul.

For further assistance or technical support, please refer to Verizon's official support channels or the Amazon Renewed customer service.