1. Sissejuhatus
This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of the Cisco IP Phone 8811. Designed for business-class collaboration, this VoIP phone delivers high-fidelity, reliable, secure, and scalable voice communications. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device.
2. Toote lõppview
The Cisco IP Phone 8811 is a cost-effective, business-class collaboration endpoint. It features an attractive ergonomic design and wideband audio for clear voice communications. The device supports SIP, RTCP, RTP, SRTP, and SDP protocols, offering encrypted voice communications for enhanced security. It integrates with Cisco communication servers to provide a comprehensive suite of unified communications features.
Image of the Cisco IP Phone 8811, a charcoal-colored VoIP phone with a display screen, keypad, and various function buttons. The phone features a handset on the left, a large display on the right, and a central navigation cluster.
3. Seadistamine
3.1 Pakendi sisu
Enne alustamist veenduge, et kõik komponendid on olemas:
- Cisco IP-telefon 8811 seade
- Telefonitoru ja spiraaljuhe
- Ethernet cable (for network connection)
- Optional: Power adapter (if Power over Ethernet (PoE) is not used)
- Dokumentatsioon (käesolev juhend)
3.2 Telefoni ühendamine
- Ühendage käsitelefon: Ühenda spiraaljuhtme üks ots telefonitoruga ja teine ots telefoni aluse telefonitoru porti.
- Võrguga ühendamine (PoE): If using Power over Ethernet, connect an Ethernet cable from your network switch or router to the "SW" (Switch) port on the back of the phone. The phone will power on automatically.
- Connect to Network (External Power): If PoE is not available, connect an Ethernet cable from your network switch or router to the "SW" port. Then, connect the optional power adapter to the phone's power port and plug it into a power outlet.
- Arvutiga ühendamine (valikuline): Kui soovite telefoni kaudu arvuti ühendada, ühendage Etherneti kaabel arvutist telefoni tagaküljel asuvasse "PC" porti.
- Esialgne käivitamine: Allow the phone to power on and connect to the network. This process may take a few minutes as the phone obtains an IP address and registers with your call control system.
3.3 Paigaldusvalikud
The Cisco IP Phone 8811 is designed for desktop use with its integrated stand. It is also wall-mountable using an optional wall-mount kit (sold separately).
4. Kasutusjuhised
4.1 Kõne põhifunktsioonid
- Helistamine: Lift the handset, press the Speaker button, or press a line button. Dial the number and press the Dial softkey or wait for automatic dialing.
- Kõnele vastamine: Lift the handset, press the Speaker button, or press the Answer softkey.
- Kõne lõpetamine: Replace the handset, press the Speaker button again, or press the End Call softkey.
- Kõne ootele panemine: During an active call, press the Hold softkey. To resume, press the Resume softkey or the flashing line button.
- Kõne edastamine: During an active call, press the Transfer softkey. Dial the transfer recipient's number, and once connected, press Transfer again to complete.
4.2 Speakerphone and Headset
Vajutage nuppu Kõlar button to activate or deactivate the speakerphone. The phone also supports a headset connection via the dedicated headset port.
4.3 Konverentskõned
The Cisco IP Phone 8811 supports 3-way conference calls. During an active call, press the Konverents softkey, dial the number of the third party, and once connected, press Konverents taas kõigi parteidega liitumiseks.
4.4 Kõnepost
Vajutage nuppu Sõnumid button to access your voicemail system. Follow the voice prompts to retrieve messages.
4.5 Helitugevuse reguleerimine
Kasutage Helitugevus button (rocker switch) to adjust the volume of the handset, speakerphone, or ringer.
5. Hooldus
5.1 Telefoni puhastamine
To clean the phone, use a soft, lint-free cloth. If necessary, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the phone's surface and internal components.
5.2 Keskkonnakaalutlused
Keep the phone away from direct sunlight, heat sources, and excessive moisture. Ensure proper ventilation around the device to prevent overheating.
6. Veaotsing
6.1 Levinud probleemid ja lahendused
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Telefon ei lülitu sisse. | Etherneti (PoE) või toiteadapteri kaudu ei ole toidet. | Verify Ethernet cable is securely connected to a PoE-enabled port, or ensure power adapter is correctly plugged in. |
| Valimistooni pole. | Telefon pole kõnejuhtimissüsteemis registreeritud; võrguprobleem. | Check network cable connection. Allow time for registration. If issue persists, contact your IT administrator. |
| Ma ei kuule helistajat / Helistaja ei kuule mind. | Volume too low; faulty handset/headset; network quality issue. | Adjust volume. Test with speakerphone. Check handset/headset connection. |
| Ekraan on tühi või hangunud. | Software issue; power interruption. | Unplug the Ethernet cable (and power adapter if used) for 10 seconds, then reconnect to restart the phone. |
For issues not listed here or if solutions do not resolve the problem, please contact your system administrator or technical support.
7. Tehnilised andmed
| Kaubamärk | OEM |
| Mudeli number | CP-8811-K9= |
| Värv | Süsi |
| Kauba kaal | 1 naela (umbes 0.45 kg) |
| Pakendi mõõtmed | 13.31 x 10.67 x 2.91 tolli (umbes 33.8 x 27.1 x 7.4 cm) |
| Telefoni tüüp | Juhtmega VoIP-telefon |
| Toiteallikas | Corded Electric (PoE or optional power adapter) |
| Helistaja tüüp | Integrated VoIP Dialer |
| Automaatvastaja tüüp | Digitaalne |
| Ühilduvad seadmed | Devices supporting SIP, PoE, and Gigabit Ethernet |
| Salvestusmaht | 18 minutes (for voicemail, if supported by system) |
| Konverentskõne võimalus | 3-suunaline |
8. Garantii ja tugi
Warranty information for the Cisco IP Phone 8811 (Model CP-8811-K9=) is typically provided by the original manufacturer, OEM, or the reseller from whom the product was purchased. Please refer to the documentation included with your purchase or contact your vendor for specific warranty terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your IT department or the authorized reseller/manufacturer support channels.
