Hager WITTY elektriautode laadimisjaama (mudel XEV103) kasutusjuhend

1. Sissejuhatus

1.1. Üleview

The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.

1.2. Ohutusjuhised

• Paigalduse peab teostama kvalifitseeritud elektrik vastavalt kohalikele ja riiklikele elektrieeskirjadele.
• Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
• Ensure the charging station is properly grounded.
• Do not use the charging station if it is damaged or shows signs of malfunction.
• Keep children and unauthorized persons away from the charging station during operation.
• Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.

2. Toote kirjeldus

2.1. Omadused

• Compatible with Mode 3 (Type 3) and Mode 2 charging.
• Free access operation.
• Power output: 4 kW to 22 kW.
• Input: 3-phase + Neutral, 32A.
• Integrated status indicator light.

2.2. Komponendid

The Hager WITTY charging station typically includes:

• Laadimisjaama üksus
• Paigaldusriistvara (kruvid, ankrud)
• Kasutusjuhend (see dokument)

Joonis 1: Esiosa view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.

Joonis 2: Külg view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.

Joonis 3: Detailne esikülg view of the Hager WITTY charging station, emphasizing the integrated green status light.

3. Seadistamine

3.1. Paigalduskoht

Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.

3.2. Paigaldamine

1. Mark the drilling points on the wall using the provided template (if applicable) or by measuring the mounting holes on the unit.
2. Puurige augud ja sisestage sobivad seinaankrud.
3. Secure the charging station to the wall using the provided screws.

3.3. Elektriühendus

HOIATUS: Elektripaigaldise peab tegema kvalifitseeritud elektrik.

1. Ensure the main power supply is disconnected before beginning any electrical work.
2. Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
3. Veenduge, et oleks olemas nõuetekohane maandus.
4. Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
5. Close the charging station cover securely.

4. Töötamine

4.1. Starting a Charge

1. Ensure the charging station is powered on and the status indicator light is green (ready).
2. Connect the charging cable to your electric vehicle's charging port.
3. Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
4. The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.

4.2. Süüdistuse peatamine

1. Disconnect the charging cable from your electric vehicle first.
2. Disconnect the charging cable from the charging station.
3. The charging station will return to a ready state (green indicator light).

4.3. Olekuindikaatorid

• Roheline tuli: Ready for charging.
• Blue Light (or flashing green): Laadimine käib.
• Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
• Valgust pole: Power off or system fault.

5. Hooldus

5.1. Puhastamine

Puhastage laadimisjaama välispind pehme lapigaamp lapiga. Ärge kasutage abrasiivseid puhastusvahendeid, lahusteid ega karme kemikaale. Enne puhastamist veenduge, et seade on välja lülitatud.

5.2. Ülevaatus

Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.

6. Veaotsing

7. Tehnilised andmed

8. Garantii ja tugi

Garantiiteabe ja tehnilise toe saamiseks pöörduge Hageri ametliku esindaja poole. website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.

Spare parts availability: Information not available.