Linksys SD205 5-Port 10/100 Ethernet Switch User Manual

1. Sissejuhatus

The Linksys SD205 is a compact and reliable 5-port 10/100 Ethernet switch designed to expand your network connectivity. This unmanaged switch provides five auto-sensing 10/100 Mbps Ethernet ports, allowing you to connect multiple devices such as computers, printers, and network-attached storage (NAS) to your local area network (LAN). Its plug-and-play design ensures easy installation without the need for complex configuration.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Linksys SD205 switch.

2. Pakendi sisu

Palun veenduge, et teie pakend sisaldab järgmisi esemeid:

• Linksys SD205 5-Port 10/100 Ethernet Switch
• Toiteadapter
• Kasutusjuhend (see dokument)

If any items are missing or damaged, please contact your retailer or Linksys support.

3. Toote omadused

• 5 kiiret Etherneti porti: Provides five 10/100 Mbps auto-sensing RJ-45 ports.
• Automaatne MDI/MDI-X: Kõrvaldab vajaduse ristkaablite järele.
• Plug-and-Play: No configuration required for easy setup.
• IEEE 802.3/802.3u Compliance: Adheres to industry standards for reliable networking.
• Kompaktne disain: Small footprint for flexible placement.
• LED indikaatorid: Provides status information for power and port activity.

4. Seadistamine

Follow these steps to set up your Linksys SD205 switch:

4.1. paigutus

• Asetage lüliti tasasele ja stabiilsele pinnale.
• Tagage seadme ümber piisav ventilatsioon, et vältida ülekuumenemist.
• Keep the switch away from direct sunlight, heat sources, and moisture.

4.2. Lüliti ühendamine

1. Ühendage toiteadapter: Plug the included power adapter into the power port on the back of the switch and then into a standard electrical outlet. The Power LED on the front panel should illuminate.
2. Võrguseadmete ühendamine: Use standard Ethernet cables (Cat5e or better recommended) to connect your network devices (e.g., computer, router, game console) to any of the five RJ-45 ports on the switch.
3. Ühenduste kinnitamine: Once a device is connected and active, the corresponding port LED on the switch will illuminate, indicating a successful link.

Figure 1: Linksys SD205 Switch with connected devices. This image illustrates the compact design and the ports for connecting Ethernet cables and the power adapter.

5. Lüliti kasutamine

The Linksys SD205 is an unmanaged switch, meaning it operates automatically without requiring any user configuration. Once connected, it will immediately begin forwarding network traffic between connected devices.

5.1. LED-indikaatorid

The front panel of the switch features LED indicators to provide status information:

• Toite LED:
  • Tahke roheline: Lüliti on sisse lülitatud ja töötab normaalselt.
  • Väljas: Lüliti ei saa voolu.
• Ühenduse/tegevuse LED-id (pordi kohta):
  • Tahke roheline: Seade on edukalt porti ühendatud.
  • Vilkuv roheline: Andmeid edastatakse või võetakse vastu pordi kaudu.
  • Väljas: No device is connected, or the connected device is not active.

6. Hooldus

The Linksys SD205 switch requires minimal maintenance to ensure optimal performance.

• Puhastamine: Lüliti välispinna puhastamiseks kasutage pehmet ja kuiva lappi. Ärge kasutage vedelaid ega aerosoolpuhastusvahendeid.
• Ventilatsioon: Ülekuumenemise vältimiseks veenduge, et ventilatsiooniavad ei oleks blokeeritud.
• Keskkonnatingimused: Operate the switch within its specified temperature and humidity ranges (refer to Specifications section).
• Püsivara: This unmanaged switch does not require user-initiated firmware updates.

7. Veaotsing

If you encounter issues with your Linksys SD205 switch, refer to the following common problems and solutions:

7.1. Pole jõudu

• Sümptom: Toite LED-tuli ei põle.
• Lahendus:
  • Veenduge, et toiteadapter on kindlalt lüliti ja töötava pistikupesaga ühendatud.
  • Proovige teist pistikupesa.
  • Verify the power adapter is the correct one supplied with the switch.

7.2. No Link Light for a Connected Device

• Sümptom: The Link/Act LED for a connected port is off.
• Lahendus:
  • Ensure the Ethernet cable is securely plugged into both the switch port and the device.
  • Proovige teist Etherneti kaablit.
  • Veenduge, et ühendatud seade on sisse lülitatud ja selle võrguadapter töötab korralikult.
  • Proovige ühendada seade lüliti teise porti.

7.3. Aeglane võrgukiirus

• Sümptom: Network performance is slower than expected.
• Lahendus:
  • Optimaalse jõudluse tagamiseks veenduge, et kõik ühendatud seadmed ja kaablid toetaksid kiirust 100 Mbps.
  • Kontrollige, kas ühendatud seadmetes on liigset võrguliiklust või ribalaiust nõudvaid rakendusi.
  • Taaskäivitage lüliti ja ühendatud seadmed.

8. Tehnilised andmed

Technical specifications for the Linksys SD205 5-Port 10/100 Ethernet Switch:

Märkus. Spetsifikatsioone võidakse ette teatamata muuta.

9. Garantii teave

Linksys products are backed by a limited warranty. For detailed information regarding the warranty period and terms applicable to your Linksys SD205 switch, please refer to the warranty card included with your product or visit the official Linksys webveebisait. Hoidke ostutšekk ostutõendina garantiinõuete korral.

10. Tehniline tugi

If you require further assistance or encounter issues not covered in this manual, please contact Linksys Technical Support.

• Veebitugi: Visit the official Linksys support website for FAQs, knowledge base articles, and driver downloads. www.linksys.com/support
• Telefonitugi: Refer to the Linksys webPiirkondlike kontaktnumbrite ja lahtiolekuaegade saamiseks külastage veebisaiti.

When contacting support, please have your product model (SD205) and serial number ready.