OEM 50074

OEM 50074 süütepooli kasutusjuhend

Mudel: 50074

Sissejuhatus

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the OEM 50074 Ignition Coil. The OEM 50074 Ignition Coil is a high-quality replacement part designed to conform to original equipment quality in form, fit, and function, ensuring reliable performance for your vehicle's ignition system.

Toode läbiview

The OEM 50074 Ignition Coil is a critical component in your vehicle's ignition system, responsible for transforming the battery's low voltage into the thousands of volts required to create an electric spark in the spark plugs. This spark ignites the fuel-air mixture in the engine's cylinders.

OEM 50074 Ignition Coil, a black cylindrical component with electrical connectors.

Joonis 1: The OEM 50074 Ignition Coil. This image shows the compact design of the ignition coil, featuring its primary body and electrical connection points, ready for installation in a vehicle's engine bay.

Peamised omadused:

Tehnilised andmed

AtribuutVäärtus
KaubamärkOEM
Mudeli number50074
Tootja osanumber50074
Kauba kaal2.16 naela (umbes 0.98 kg)
Pakendi mõõtmed5.36 x 4.89 x 4.35 tolli (umbes 13.6 x 12.4 x 11.0 cm)
Installi tüüpScrew-In or Bolt-On
PäritoluriikAmeerika Ühendriigid

Seadistamine ja installimine

Vastutusest loobumine: Installation of automotive parts can be complex and may require specialized tools and knowledge. If you are not confident in your ability to perform this installation, it is recommended to seek assistance from a qualified automotive technician. Always refer to your vehicle's specific service manual for detailed instructions.

Required Tools (May Vary by Vehicle):

Paigaldamise etapid:

  1. Ohutus ennekõike: Ensure the vehicle's engine is cool. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical discharge.
  2. Leidke vana mähis: Identify the existing ignition coil(s) in your vehicle. Their location varies by engine type (e.g., on the valve cover, near spark plugs, or in a coil pack).
  3. Elektripistiku lahtiühendamine: Carefully disconnect the electrical connector from the old ignition coil. Press any release tabs or clips before pulling.
  4. Eemaldage kinnitusdetailid: Unscrew any bolts or fasteners securing the old ignition coil in place. The OEM 50074 supports screw-in or bolt-on installation.
  5. Eemaldage vana mähis: Gently pull the old ignition coil straight up and out. If it's a coil-on-plug design, it will be directly over the spark plug.
  6. Kontrollige ja puhastage: Inspect the spark plug well for debris or oil. Clean if necessary.
  7. Uue mähise paigaldamine: Insert the new OEM 50074 Ignition Coil into its position. Ensure it seats properly.
  8. Turvalised kinnitusdetailid: Reinstall and tighten the bolts or fasteners that secure the new coil. Refer to your vehicle's service manual for specific torque specifications.
  9. Elektripistiku uuesti ühendamine: Reconnect the electrical connector to the new ignition coil until it clicks into place.
  10. Ühendage aku uuesti: Ühendage uuesti sõiduki aku negatiivne klemm.
  11. Test: Start the vehicle and check for proper operation and any diagnostic trouble codes.

Kasutusjuhised

The OEM 50074 Ignition Coil operates as an integral part of your vehicle's engine management system. Once correctly installed, it functions automatically to provide the necessary high voltage for spark plug ignition. There are no user-adjustable settings or operational controls for the ignition coil itself.

Proper operation is indicated by smooth engine performance, consistent idling, and efficient fuel combustion. Any issues related to the ignition system, such as misfires or rough idling, may indicate a problem with the ignition coil or other related components.

Hooldus

The OEM 50074 Ignition Coil is designed for long-term reliability and typically requires minimal maintenance. However, regular vehicle maintenance practices can help ensure its optimal performance and longevity:

Veaotsing

If you experience issues with your vehicle's ignition system after installing the OEM 50074 Ignition Coil, consider the following common troubleshooting steps:

SümptomVõimalik põhjusLahendus
Mootori süütekatkestus / ebaühtlane tühikäikIncorrect installation, faulty spark plug, wiring issue, or another component failure.Verify coil is fully seated and secured. Check electrical connections. Inspect spark plugs. Consult a diagnostic tool for specific trouble codes.
Check Engine Light (CEL) OnDiagnostic Trouble Code (DTC) related to ignition system.Use an OBD-II scanner to retrieve DTCs. Address the specific code (e.g., P030x for misfire).
No Start ConditionNo spark from ignition coil, or other major engine component failure.Confirm battery is charged. Check all electrical connections. Test for spark at the spark plugs. If no spark, further diagnosis of the ignition system is needed.

If troubleshooting steps do not resolve the issue, it is recommended to consult a certified automotive technician for professional diagnosis and repair.

Garantii ja tugi

Information regarding the specific warranty for the OEM 50074 Ignition Coil is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact OEM customer service through their official website or the contact information provided with your product. When contacting support, please have your product model number (50074) and purchase details readily available.

Note: This manual provides general guidance. Always refer to your vehicle's specific service manual for detailed procedures and safety precautions.

Seotud dokumendid - 50074

Preview OEM-i Domitor Pro Pizzaofen Bedienungsanleitung und Sicherheitshinweise
Umfassende Bedienungsanleitung und Sicherheitshinweise für den professionellen OEM Domitor Pro Pizzaofen. Enthält Details zur Installation, Bedienung, Wartung und Fehlerbehebung für Modelle wie 430, 435, 630S, 630L, 930, 830, 835, 1230L.
Preview OEM RFID-käskude käsiraamat DOMC-0002e
Põhjalik juhend OEM RFID-käskude kohta, mis kirjeldab üksikasjalikult protokolle, parameetreid ja konkreetseid käske RFID-lugeja/kirjutaja seadmetele. Sisaldab tehnilisi kirjeldusi ja kasutusjuhiseid standardite ISO14443, ISO15693 ja I-CODE jaoks.
Preview OEM-i blisterpakendi- ja kandikulahendused
Teave OEM-i blisterpakendite, alusplaatide ja seotud teenuste kohta, sh vormimisviisid, materjalid, pinnatöötlused, tarneajad, kvaliteedistandardid ja rakendused.
Preview OEM-toote omadused ja kohandamisvõimalused
OEM-i kohandatavate toodete üksikasjalikud spetsifikatsioonid, sh sellised omadused nagu kaasaskantavus, veekindel disain, keskkonnasõbralikud materjalid ning mitmesugused trükkimis- ja viimistlusvõimalused kohandatud kujunduste jaoks.
Preview Toote omadused: OEM mood ja vabaaja kott
EVA-st valmistatud OEM-moe- ja vabaajakoti detailsed tooteomadused, millel on kokkupandav disain, mõõdukas kõvadus, kohandatavad mõõtmed ja eemaldatav õlarihm.
Preview OEM 香水 125 ml – 多种香型,适用于多种平台
详细介绍OEM香水产品属性,包括125ML净含量,杏仁、薄荷、丁香、柏木、晚香玉、乌木等多种香型,花香调,赋香率率18-25%.亚马逊, soovin, 速卖通等平台有售.