eSSL Security JS-35E Keypad Access Control
Description
The device is a standalone access control and proximity card reader which supports EM card types. It builds-in STC microprocessor, with strong anti-interference ability.high security and reliability,powerful function and convenient operation. It’s widely used in high-end buildings, residential communities and other public places.
Features
| Ultra-low Power | Standby current is less than 30mA |
| Wiegand Interface | WG26 or WG34 input and output |
| Searching time | Less than 0.1s after reading card |
| Backlight keypad | Operate easily at night |
| Doorbell interface | Support external wired doorbell |
| Access ways | Card, Pin code, Card & Pin code |
| Independent codes | Use codes without related card |
| Change codes | Users can change codes by themselves |
| Delete users by card No. | The lost card can be deleted by keyboard |
Specifications
- Working Voltage, DC12V Standby Current: :S30mA
- Gard Reading Distance, 2 – 5cm Capacity: 2000 users
- Working Temperature, -40°C ~60°C Working Humidity: 10%~90%
- Lock output load, <3A Door Relay time, 0~99S (Adjustable)
Installation
Drill hole according to the size of the device and fix the back shell with the equipped screw. Thread the cable through the cable hole. connect the wires according to your required function, and wrap the unused wires to avoid short circuit. After connecting the wire, install the machine. (as show below) 
Wiring
| Color | ID | Description |
| Green | DO | Wiegand lnput(Wiegand Output in Card Reader Mode) |
| White | D1 | Wiegand lnput(Wiegand Output in Card Reader Mode) |
| Yellow | CFEN | Exit Button input terminal |
| Red | +121/ | 12V + DC Regulated Power Input |
| Black | GND | 12V – DC Regulated Power Input |
| Blue | NO | Relay normally-on terminal |
| Purple | COM | Relay Public terminal |
| Orange | NC | Relay normally-off terminal |
| Pink | BELL A | Doorbell button one terminal |
| Pink | BELL B | Doorbell button to the other terminal |
Diagram
Common Power Supply 
Special Power Supply 
Reader Mode
Sound & Light indication
| Oper ate St atu s | LED Light Color | Buzz er |
| Standby | Red | |
| Keypad | Beep | |
| Operation Successful | Green | Beep – |
| Operation Failed | Beep-Beep-Beep | |
| Entering into Programming | Flash Red Slowly | Beep – |
| Programmable Status | Orange | |
| Exit Programming | Red | Beep- |
| Door Opening | Green | Beep – |
Advance setting
| Read | master add card | Read | the | l5 | 1 | use r card | Read | the | 2nd user card |
Note: The master add card is used to add card users continuous ly and quickly. When you read the master add card at the first time, you will hear short “BEEP” sound twice and the indicator light turns orange, it means you have entered into add user programming. When you read the master add card at the second time, you will hear long “BEEP” sound once and the indicator light turns red, it means you have exited the add user programming
Delete Card Read master delete card
Not e: The master delete card is used to delete card users continuously and quickly. When you read the master delete card at the first time, you will hear short “BEEP” sound twice and the indicator light turns orange, it means you have entered into delete user programming. When you read the master delete card at the second time, you will hear long “BEEP” sound once, the indicator light turns red, it means you have exited the delete user programming.
Data Backup Operation
Example: Backup the data of machine A to machine B
The green wire and white wire of machine A connects with the green wire and white wire of machine B correspondingly, set B for receiving mode at first, then set A for sending mode, the indicator light turns green flash during the data backup, data backup is successful when indicator light turns red.
Master code 71 Set B for receiving mode firstly
Master 70 Set A for sending mode secondly
Reading this manna carefully before install and use the device
Documents / Resources
 |
eSSL Security JS-35E Keypad Access Control [pdf] User Manual JS-35E, JS-35E Keypad Access Control, JS-35E, Keypad Access Control, Access Control, Control |