espiro Co-Sleeper Attachment Strap
Specifications
| Product | espiro Co-sleeper Attachment Strap |
|---|---|
| Compliance | EN 1130-1:2007, EN 1130:2019 |
| Intended age | From birth to approximately 6 months |
| Max child weight | Up to 9 kg |
Troubleshooting
- If a gap appears between the beds: never fill it with blankets, pillows, or other items; stop co-sleeper use.
- If you cannot ensure secure attachment: ensure the adult bed structure allows secure attachment; do not use with waterbeds, air mattresses, or beds that do not allow secure strap attachment.
- If the child can sit, kneel, or pull themselves up unaided: stop using the crib in co-sleeper mode.
- If parts/components are damaged or missing: do not use the product; use only recommended replacement parts from the manufacturer.
- If the crib is not on a flat, level surface: do not leave the crib (with attachment system installed and child inside) on a sloping surface.
Installation Instruction



Safety Warning
IMPORTANT! KEEP FOR FUTURE REFERENCE – READ CAREFULLY
- DO NOT USE the co-sleeper attachment strap without first reading the user manual.
- NEVER use the crib without the side panel attached when it is not being used as a co-sleeper!
- Stop using the crib in co-sleeper mode as soon as the child can sit, kneel, or pull themselves up unaided.
- To avoid the risk of suffocation, ensure the attachment strap is kept out of the child’s reach.
- Do not use the product if any parts or components are damaged or missing. Use only recommended replacement parts from the manufacturer.
- The mattress height in the co-sleeper crib should be level with the mattress on the adult bed.
- To avoid the risk of suffocation, ensure the crib is correctly and securely attached to the adult bed.
- Under no circumstances should you use the crib as a co-sleeper if a gap or space remains between the beds after installing the attachment system.
- The product is intended for infants from birth to approximately 6 months of age, weighing up to 9 kg.
- Before use, ensure there are no damaged, broken, or missing parts.
- Ensure the adult bed to which the crib is attached has a suitable structure that allows for secure attachment.
- Do not use with waterbeds, air mattresses, or beds with frames that do not allow for the secure attachment of the strap.
- The height of the co-sleeper mattress should be level with the mattress of the adult bed.
- To avoid danger to the child, the co-sleeper function is intended for use only with beds that allow the front rail to be removed and the crib to be rigidly secured—i.e., with the wheels locked.
- Never use more than one mattress in the crib.
- The crib may only be used as a co-sleeper on flat, level surfaces.
- Never leave the crib—with the attachment system installed and the child inside—on a sloping surface.
- When not in use, store the attachment strap out of the reach of children.
- Before each use, ensure the crib is properly attached to the adult bed by pulling the crib away from the bed.
- If a gap appears between the beds, never fill it with blankets, pillows, etc.
- Do not leave the child unattended.
- Do not allow children to play unsupervised near or with the product.
- Use only damp wipes to clean the product.
ABOUT COMPANY
- BDG PRODUKCJA SP. Z.O.O.
- IJI. Warszawska 8
- 42 – 262 Poczesna
- POLAND
- Tel. +48 (34) 360 46 64 +48 (34) 360 46 53
- Tel. semis +48 (34) 364 36 41
- E-mail: biuro@espiro.eu
- E-mail serwis: serwis@espiro.eu
Documents / Resources
![]() | Co-Sleeper Attachment Strap |
References
- User Manualmanual.tools
Published: November 18, 2026
Updated: November 19, 2026

