CONTROLLERS
SERIES CRC110
CRC111
230 VAC
ESBE series CRC110 is a combined actuator and a weather compensating control unit with quick and simple installation. Settings are done by an easy-to-use joystick and display interface. For valves up to DN50, especially suited for ESBE valves series VRG and series VRB.
OPERATION
The ESBE series CRC110 is designed to provide a high level of comfort thanks to the possibility to set a perfect characteristic heating curve and at the same time provide energy savings for the house owner. The controller consists of two parts:
- actuator unit, to be mounted to the mixing valve controlling the heat supply.
- outdoor sensor, to be mounted on the north side of the building
The regulation is based on outdoor sensor feedback and an adjustable characteristic heating curve. An offset/parallel adjustment of the characteristic heating curve may be activated by an external signal for example night settings. For applications with well-insulated buildings and quick heating systems such as radiator circuits can a temperature filter be activated to delay an outdoor temperature change to avoid an imbalance between estimated and actual heating demand.
MOUNTING
Power supply by 230 V AC adapter (complete with transformer, cable and wall socket plug). Flow pipe sensor with 1,5m cable included (longer cable available as accessory). The sensor must be carefully insulated from ambient temperature.
Outdoor sensor with 20 m cable. The sensor shall be mounted on the north side of the building under the eaves in order to protect the sensor from direct sunlight and rain.
Thanks to the special interface between the controller series CRC110 and the ESBE valve series VRG, VRB, and VRH, the unit as a whole has unique stability and precision when regulating.
OPTIONAL EQUIPMENT
Art. No.
16200700 _________________ ARA801 Auxiliary switch kit
17053100 __________ CRA911 Flow pipe sensor, 5m cable
SUITABLE MIXING VALVES
| Series VRG100 Series VRG200 Series VRG300 Series VRH100 Series VRB100 |
Series MG* Series G Series F ≤ DN50 Series BIV Series T and TM Series H and HG * Not 5MG |
ADAPTOR KITS
Required adaptor kits for easily fitting onto an ESBE rotary mixing valve series VRG, VRB, and VRH is supplied with each controller. Adaptor kits can also be ordered separately.
Art. No.
16000500 __________________________ ESBE valve series VRG, VRH, VRB, G, MG, F, BIV, T, TM, H, HG
Adaptor kits for other mixing valves are available as follows:
Art. No.
16000600 __________________________________ Meibes
16000700 ___________________________________ Watts
16000800 ________________________ Honeywell Corona
16000900 __________________________________ Lovato
16001000 ____________________________________PAW
16001100 ____________________Wita Minimix, Maximize
TECHNICAL DATA
Ambient temperature: _____________max. +55°C ____________ min. -5°C
Temperature range,
Flow pipe sensor: ____________________ +5 to +95°C
Outdoor sensor: ____________________ -50 to +70°C
Enclosure rating:______________IP41
Protection class: ______________________ II
Power supply: ___________________ 230 ± 10% V AC, 50 Hz
Power consumption – 230 V AC:_______________ 10 VA
Torque: ______________ 6 Nm
Running time at max. speed: ________________ 30s
ERP Temperature controls class: _______________ III
Energy efficiency contribution: _______________ 1,5%
Weight: _______________________ 0,9 kg
LVD 2014/35/EU
EMC 2014/30/EU
RoHS3 2015/863/EU
Installation dimensions for Controller Series CRC110 with ESBE VRG100, VRG200, VRG300, VRH100 and VRB100 mixing valves
SERIES CRC110
| Art. No. | Reference | Voltage [V AC] | Torque [Nm] | Note |
| 12820100 | CRC111 | 230 | 6 |
INSTALLATION EXAMPLES
ESBE SERIES CRC110 • EN • F
© Copyright. Rights reserved to make alterations.
Documents / Resources
 |
ESBE CRC110 Controller Unit [pdf] Installation Guide CRC110, Controller Unit, CRC110 Controller Unit |
