ESBE BPD-3 BUILDING PRODUCT DECLARATION User Manual

Product identification				Document ID 18.11
Product name GMA 3×1	Product no/ID designation 6600xxxx			Product group 6600
New declaration Revised declaration	In the case of a revised declaration
	Has the product been changed?		The change relates to
	No	Yes	Changed product can be identified by
Drawn up/revised on (date) 2021-11-19			Inspected without revision on (date)
Other information:

Supplier information

Company nameEsbe AB			Company reg. no/DUNS no
Address Bruksgatan 22 SE-330 21 Reftele			Contact person Customer service
			Telephone 0371 570100
Website: www.esbe.eu			E-mail order@esbe.eu
Does the company have an environmental management system?			Yes	No
The company possesses certification in compliance with	ISO 9000	ISO 14000	Other	If “other”, please specify:
Other information:

Product information

Country of final manufacture Germany/ Austria		If country cannot be stated, please state why
Area of use Hot Water- and Heating installations
Is there a Safety Data Sheet for this product?				Not relevant	Yes	No
In accordance with the regulations of the Swedish Chemicals Agency, please state:		Classification Labelling			Not relevant
Is the product registered in BASTA?					Yes	No
Has the product been eco-labelled?	Criteria not found	Yes	No	If “yes”, please specify:
Is there a Type III environmental declaration for the product?					Yes	No
Other information: see product data sheet at ESBES home page

To add a new green row, select and copy an entire empty row and paste it in)

At the time of delivery, the product comprises the following parts/components, with the chemical composition stated:
Constituent materials/ components	Constituent substances	Weight % or g	EG no/ CAS no (or alloy)	Classifi- cation	Comments
Steel		91%	68467-81-2
Plastic	PP	4%	9003-07-0
Brass		5%	12597-71-6		SV HC- subject (lead)


Other information:
If the chemical composition of the product after it is built in differs from that at the time of delivery, the content of the finished built in product should be given here. If the content is unchanged, no data need be given in the following table.
Constituent materials/ components	Constituent substances	Weight % or g	EG no/ CAS no (or alloy)	Classifi- cation	Comments


Other information:

Production phase

Resource utilisation and environmental impact during production of the item is reported in one of the following ways: 1) Inflows (goods, intermediate goods, energy etc) for the registered product into the manufacturing unit, and the outflows (emissions and residual products) from it, i.e. from “gate-to-gate”. 2) All inflows and outflows from the extraction of raw materials to finished products i.e. “cradle-to-gate”. 3) Other limitation. State what:
The report relates to unit of product		Reported product		The product’s product group				The product’s production unit
Indicate raw materials and intermediate goods used in the manufacture of the product						Not relevant
Raw material/intermediate goods		Quantity and unit				Comments



Indicate recycled materials used in the manufacture of the product						Not relevant
Type of material		Quantity and unit				Comments


Enter the energy used in the manufacture of the product or its component parts						Not relevant
Type of energy		Quantity and unit				Comments


Enter the transportation used in the manufacture of the product or its component parts						Not relevant
Type of transportation		Proportion %				Comments


Enter the emissions to air, water or soil from the manufacture of the product or its component parts						Not relevant
Type of emission		Quantity and unit				Comments


Enter the residual products from the manufacture of the product or its component parts							Not relevant
Residual product	Waste code	Quantity	Proportion recycled				Comments
			Material recycled %		Energy recycled %


Is there a description of the data accuracy for the manufacturing data?	Yes	No	If “yes”, please specify:
Other information:

Distribution of finished product

Does the supplier put into practice a system for returning load carriers for the product?	Not relevant	Yes	No
Does the supplier put into practice any systems involving multi-use packaging for the product?	Not relevant	Yes	No
Does the supplier take back packaging for the product?	Not relevant	Yes	No
Is the supplier affiliated to REPA?	Not relevant	Yes	No
Other information:

Construction phase

Are there any special requirements for the product during storage?	Not relevant	Yes	No	If “yes”, please specify:
Are there any special requirements for adjacent building products because of this product?	Not relevant	Yes	No	If “yes”, please specify:
Other information:

Usage phase

Does the product involve any special requirements for intermediate goods regarding operation and maintenance?			Yes	No	If “yes”, please specify:
Does the product have any special energy supply requirements for operation?			Yes	No	If “yes”, please specify:
Estimated technical service life for the product is to be entered according to one of the following options, a) or b):
a) Reference service life estimated as being approx.	5 years	10 years	15 years	25 years	>50 years	Comments
b) Reference service life estimated to be in the interval of 10-30 years
Other information:

Demolition

Is the product ready for disassembly (taking apart)?	Not relevant	Yes	No	If “yes”, please specify:
Does the product require any special measures to protect health and environment during demolition/disassembly?	Not relevant	Yes	No	If “yes”, please specify:
Other information:

Waste management

Is it possible to re-use all or parts of the product?	Not relevant	Yes	No	If “yes”, please specify:
Is it possible to recycle materials for all or parts of the product?	Not relevant	Yes	No	If “yes”, please specify: Metal
Is it possible to recycle energy for all or parts of the product?	Not relevant	Yes	No	If “yes”, please specify: Insulation shell
Does the supplier have any restrictions and recommendations for re-use, materials or energy recycling or waste disposal?	Not relevant	Yes	No	If “yes”, please specify:
Enter the waste code for the supplied product Metal: EWC 200140, Plastics: EWC 200139 Paper EWC 200101
Is the supplied product classed as hazardous waste?				Yes	No
If the chemical composition of the product differs after having been built in from that which it had at the time of delivery, meaning that another waste code is given to the finished built in product, then this should be entered here. If it is unchanged, the following details can be omitted.

Enter the waste code for the built in product
Is the built in product classed as hazardous waste?	Yes	No
Other information:

Indoor environment

(To add a new green row, select and copy an entire empty row and paste it in).

When used as intended, the product gives off the following emissions:					The product does not have any emissions
Type of emission	Quantity [µg/m2h] or [mg/m3h]			Method of measurement		Comments
	4 weeks		26 weeks
Can the product itself give rise to any noise?				Not relevant		Yes	No
Value		Unit		Method of measurement
Can the product give rise to electrical fields?				Not relevant		Yes	No
Value		Unit		Method of measurement
Can the product give rise to magnetic fields?				Not relevant		Yes	No
Value		Unit		Method of measurement
Other information:

Documents / Resources

	ESBE BPD-3 BUILDING PRODUCT DECLARATION [pdf] User Manual BPD-3 BUILDING PRODUCT DECLARATION, BPD-3, BUILDING PRODUCT DECLARATION, BPD-3 DECLARATION
	ESBE BPD-3 BUILDING PRODUCT DECLARATION [pdf] User Manual BPD-3 BUILDING PRODUCT DECLARATION, BPD-3, BUILDING PRODUCT DECLARATION, BPD-3 DECLARATION