JPL ICON DONGLE Bluetooth USB-C Dongle User's Manual
The JPL ICON DONGLE is a wireless Bluetooth USB dongle designed for PCs and USB host devices, including phones. It facilitates wireless connections, particularly for Bluetooth headsets with mobile phones and PCs. While many modern computers have built-in Bluetooth, this customized dongle addresses limitations faced by softphone users seeking to use Bluetooth headsets, especially concerning audio streaming via the A2DP profile.
Features
- Bluetooth Version 4.2, offering improved data transfer, security, and connectivity.
- LED status indication for clear operational feedback.
- USB Type-C Interface for modern connectivity.
- Frequency range: 2402 ~ 2480MHz.
- RF Power: +3 dBm/Max.
- Sensitivity: -89dBm at 0.1% BER.
Product Overview
The JPL ICON DONGLE is a Bluetooth host device that allows Bluetooth headsets to be paired with it. This dongle is developed to overcome difficulties and limitations users might face when trying to use Bluetooth headsets with softphones, particularly regarding audio streaming.
Product Description and Components
The JPL ICON DONGLE is a compact, circular USB-C device. It features a USB Type-C connector, a visible reflector that can display red, blue, or purple light, and a top case with silk printing for branding.
| Number | Name |
|---|---|
| 1 | USB TYPE-C CONNECTOR |
| 2 | REFLECTOR (RED/BLUE/PURPLE) |
| 3 | TOP CASE (SILK PRINTING) |
| 4 | BOTTOM CASE |
LED Status Indicators
The dongle's LED indicator provides visual feedback on its operational status:
| Status | LED Color and Action |
|---|---|
| POWER ON | RED LED ON |
| REGISTRATION MODE | RED & BLUE TOGGLE -> 1MIN TIME OUT |
| HEADSET REGISTRATION | BLUE LED ON |
| A2DP MODE | PURPLE LED ON&OFF |
| A2DP PLAY | PURPLE LED ON&OFF |
| HFP MODE | BLUE LED ON&OFF (FAST) |
| NOT USED MODE | - |
Supported Bluetooth Profiles
- HFP (Hands-Free Profile)
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio/Video Remote Control Profile)
Pairing Instructions
To make pairing, the JPL gateway program must be used. When the dongle is in pairing mode, the purple LED is blinking. If pairing is successful, the blue LED stops blinking and turns on.
Manufacturer Information
Model Name: JPL ICON DONGLE
Manufacturer: Dasan Electron
Address: #307, Plant 1 Dong, Kyunggitechno Park 705, Haean-ro, Sangnok-gu, Ansan-si, Gyeonggi-do, South Korea
Contact: andychoi@headsetkorea.com
Warranty Information
Note: THIS WARRANTY CARD WILL BE VOID IF IT IS NOT MAILED BACK TO OUR COMPANY WITHIN 10 DAYS FROM DATE OF PURCHASE. WARRANTY CONDITIONS (PLEASE SEE OVERLEAF).
FCC Compliance
FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
