Closed Endwall for C20 without frame
| NO. | Description | QTY |
|---|---|---|
| 16A | Tension Tube for back panel | 4 |
| 17 | Angle Seat | 6 |
| 18 | Big ratchet | 2 |
| 19 | Iron plate | 2 |
| 20 | Bolt | 6 |
| 21 | Rope | 1 |
| 22 | Cover | 1 |
Find out the spare parts, and check the qty and function according to the list above.
Assembly Diagram
The diagram illustrates the assembly of the closed endwall for the C20 container shelter. It shows a container with the endwall structure attached. Key components are highlighted with callouts:
- A large circular structure representing the endwall is shown, with a magnified view of the top section.
- The top magnified view shows component 21 (Rope) and 22 (Cover) connected.
- The main diagram shows a container on the left and the endwall structure on the right.
- Component 16A (Tension Tube for back panel) is shown connecting the container to the endwall structure.
- A magnified view on the right shows the connection points for components 17 (Angle Seat), 16A (Tension Tube), and 20 (Bolt) attaching the endwall to the container frame.
- Another magnified view shows component 19 (Iron plate) being used in the assembly.
- A detailed view of component 17 (Angle Seat) and 16A (Tension Tube) connected with 20 (Bolt) is also provided.
Assembly the cover according to above drawing.
