Rust-Oleum 393378-6PK

Rust-Oleum Stops Rust Turbo Spray Paint (Model 393378-6PK)

Satin Black Protective Enamel

1. Producto terminadoview

The Rust-Oleum Stops Rust Turbo Spray System Spray Paint is an oil-based enamel designed for large projects, offering superior coverage and durability. This product provides rust and corrosion protection for metal, wood, concrete, and masonry surfaces. Its advanced Turbo Spray System delivers a wide fan spread for efficient application.

Características principales:

Rust-Oleum Stops Rust Turbo Spray Paint can in Satin Black

Image 1.1: Rust-Oleum Stops Rust Turbo Spray Paint, Satin Black, 24 oz can.

Comparison of standard and turbo spray patterns

Image 1.2: Illustration comparing standard spray patterns with the Turbo Spray System's wider fan pattern (up to 10 inches).

Close-up of the Turbo Tip nozzle

Imagen 1.3: Primer plano view of the Turbo Tip, designed for a wide fan spray.

2. Información de seguridad

ADVERTENCIA: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always read and follow all warnings and instructions on the product label.

Precauciones generales de seguridad:

3. Configuración y preparación

Preparación de la superficie:

  1. Ensure the surface is clean, dry, and free of loose rust, dirt, grease, oil, and old paint.
  2. For best adhesion, lightly sand glossy surfaces.
  3. Prime bare metal or heavily rusted surfaces with a Rust-Oleum Stops Rust primer for optimal rust prevention and adhesion.

Preparación del área de trabajo:

Image showing essential preparation items: drop cloth, comfort grip, protective eyewear, sandpaper, painter's tape, lint-free cloth, and gloves.

Image 3.1: Recommended preparation and safety items for painting.

4. Instrucciones de funcionamiento (Aplicación)

Antes de pulverizar:

  1. Shake the can vigorously for one minute after the mixing ball begins to rattle. Continue to shake occasionally during use.
  2. Test spray on a scrap piece of material to check color and spray pattern.

Técnica de aplicación:

  1. Hold the can upright 10-16 inches from the surface.
  2. Press the spray button firmly and move the can back and forth in a steady motion, slightly overlapping each stroke.
  3. For best results, apply two or more light coats a few minutes apart rather than one heavy coat. This helps prevent drips and runs.
  4. The Turbo Spray System provides a wide fan pattern, allowing for faster coverage of large areas. Adjust your movement speed to achieve even coverage.
Person spraying a metal chair with Rust-Oleum Turbo Spray Paint

Imagen 4.1: Example of applying Rust-Oleum Turbo Spray Paint to a metal surface.

Drying and Recoating:

Painted wood and metal samples showing paint adhesion

Image 4.2: Demonstrates paint adhesion to both wood and metal surfaces.

Close-up of the spray can cap, indicating color match

Image 4.3: The spray can cap is designed to match the paint color for easy identification.

5. Mantenimiento y almacenamiento

Después de cada uso:

Almacenamiento:

6. Solución de problemas

Problemas comunes y soluciones:

AsuntoPosible causaSolución
Sputtering or Uneven SprayInsufficient shaking, clogged nozzle, low can pressure.Shake can vigorously for at least one minute before use and occasionally during application. Invert can and spray to clear nozzle. Ensure can is not too cold.
Gotea o correSpraying too close to the surface, applying too heavy a coat, moving the can too slowly.Maintain a distance of 10-16 inches. Apply several light coats instead of one heavy coat. Move the can at a consistent, steady pace.
Cobertura deficienteSpraying too far from the surface, moving the can too quickly.Adjust spraying distance to 10-16 inches. Slow down movement slightly to ensure adequate paint deposition.
Wrinkling of PaintRecoating between 1 and 48 hours.Ensure recoating occurs within 1 hour or after 48 hours to avoid wrinkling.

7. Especificaciones

EspecificaciónDetalle
MarcaRust-Oleum
Nombre del modeloStops Rust Turbo Spray Paint
Número de modelo393378-6PK
ColorNegro satinado
Tipo de acabadoSatín
Tamaño24 onzas (paquete de 6)
Volumen del artículo144 onzas líquidas (total para 6 latas)
Tipo de pinturaSpray, Oil-Based Enamel
Usos específicosInterior/Exterior
Recomendación de superficieMetal, Wood, Concrete, Masonry
Características especialesChip Resistant, Fade Resistant, Fast-Drying, Rust Resistant, Scratch Resistant
Cobertura24-40 square feet per can
Nivel de resistencia al aguaResistente al agua
Dimensiones del producto8.38 x 5.69 x 14.69 pulgadas (paquete)
Peso del artículo11.68 libras (paquete)
Comparison of traditional 12oz aerosol can and Turbo 24oz aerosol can

Image 7.1: Size comparison between a traditional 12oz aerosol can and the larger 24oz Turbo aerosol can.

Sheen Guide showing Flat, Satin, Semi-Gloss, and Gloss finishes

Image 7.2: Sheen Guide illustrating different finish types: Flat (no shine), Satin (medium shine), Semi-Gloss (medium-high shine), and Gloss (high shine).

8. Garantía y soporte

Información de garantía:

Specific warranty details for this product are not provided in the available information. For warranty inquiries, please refer to the product packaging or contact Rust-Oleum directly.

Atención al cliente:

For further assistance, technical support, or product information, please visit the official Rust-Oleum websitio o contacte con su departamento de atención al cliente. También puede visitar el Rust-Oleum Store on Amazon.

9. Vídeos oficiales del producto

No se encontraron vídeos oficiales del producto del vendedor en los datos proporcionados.

Documentos relacionados - 393378-6PK

Preview Ficha técnica del sistema de pulverización turbo Rust-Oleum Stops Rust SRT-44
Ficha técnica de Rust-Oleum Detiene el Óxido con Sistema Turbo Spray (SRT-44), que incluye descripción del producto, instrucciones de aplicación y propiedades físicas. Conozca su rendimiento, tiempos de secado y preparación.
Preview Sprays texturizados Rust-Oleum para detener el óxido: datos técnicos y guía de aplicación
Datos técnicos y guía de aplicación de los aerosoles texturizados Rust-Oleum Stops Rust, que detallan los usos del producto, la preparación, las instrucciones de aplicación, los tiempos de secado, la limpieza y las propiedades físicas para varios acabados de pintura en aerosol texturizada.
Preview Transformaciones de gabinetes Rust-Oleum: Datos técnicos y guía de aplicación
Información técnica completa y guía de aplicación paso a paso para Rust-Oleum Cabinet Transformations, un sistema de recubrimiento para gabinetes de madera, laminado y metal, ideal para proyectos de bricolaje. Incluye detalles del producto, preparación, aplicación y propiedades físicas.
Preview Sistema Rust-Oleum para la transformación de muebles con bajo contenido de COV | Datos técnicos y guía de aplicación
Datos técnicos completos y guía de aplicación para el sistema de bajo VOC Rust-Oleum Furniture Transformations, preparación de superficies detalladas, deslustrador, capa de unión, esmalte decorativo y aplicación de capa superior para un acabado duradero en los muebles.
Preview Ficha técnica del tinte para pisos Nano Shield de secado rápido | Rust-Oleum
Comprehensive technical data for Nano Shield Fast Dry Floor Stain by Rust-Oleum. Includes product features, application guide, surface preparation, physical properties, coverage, dry times, and safety warnings for interior hardwood floors.
Preview Membrana impermeabilizante Rust-Oleum Fillcoat: Especificaciones técnicas
Especificaciones técnicas detalladas de la membrana impermeabilizante Rust-Oleum Fillcoat, incluyendo aplicación, tiempos de secado, consumo y datos de seguridad para cubiertas y terrazas. Código de producto: Fillcoat.