Maxxima 9-inch Hardwired LED Under Cabinet Light (Model MSL-905005)

Introducción

Thank you for choosing the Maxxima 9-inch Hardwired LED Under Cabinet Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Información importante de seguridad

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

• This fixture is designed for 120VAC operation.
• No instale este accesorio con las manos mojadas o mientras esté parado sobre una superficie mojada o húmeda.amp superficie.
• Asegúrese de que todas las conexiones estén seguras y adecuadamente aisladas.
• This product is ETL listed, ensuring compliance with North American safety standards.

Contenido del paquete

• Maxxima 9-inch Hardwired LED Under Cabinet Light Fixture
• Herrajes de montaje (tornillos, tuercas para cables)
• Manual de instrucciones

Características del producto

The Maxxima 9-inch LED Under Cabinet Light offers versatile illumination with advanced features:

• 5 CCT Selectable Color Temperatures: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a convenient slide switch.
• Interruptor de encendido/apagado integrado: A rocker switch on the fixture allows for direct control.
• Instalación cableada: Designed for direct connection to your electrical system.
• Eficiencia energética: 4.5 Watts, providing 270 lumens of light.
• Duradero y de larga duración: Damp rated with a 50,000-hour lifetime.
• Diseño compacto: Dimensions of 9"L x 3.58"W x 1.45"H.

Imagen: Primer plano view of the fixture's On/Off switch and the 5 CCT color temperature selection switch.

Image: Visual representation of the five color temperature options available on the fixture.

Instrucciones de instalación

1. Preparación

1. Apague la energía: Localice el disyuntor o la caja de fusibles y desconecte la alimentación del área donde instalará la lámpara. Verifique que la alimentación esté apagada usando un vol.tage probador.
2. Reúne herramientas: You will need a screwdriver, wire strippers, a drill, and possibly a pencil for marking.

2. Montaje del dispositivo

3. Position the fixture under the cabinet in the desired location. Mark the two mounting screw locations (4" apart) on the mounting surface.
4. Taladre agujeros guía si es necesario.
5. Secure the fixture to the mounting surface using the provided screws. Ensure the fixture is firmly attached.

Image: Underside of the fixture, highlighting the mounting points for installation.

3. Conexiones de cableado

6. Open the wiring compartment cover on the fixture.
7. Carefully strip approximately 3/8 inch of insulation from the ends of the house supply wires (black, white, and ground).
8. Connect the fixture's black wire to the house's black (hot) wire using a wire nut.
9. Connect the fixture's white wire to the house's white (neutral) wire using a wire nut.
10. Connect the fixture's green (ground) wire to the house's bare copper or green (ground) wire using a wire nut.
11. Ensure all wire nuts are securely tightened and no bare wire is exposed.
12. Coloque con cuidado todos los cables en el compartimento de cableado y cierre la tapa.

Image: The wiring compartment of the fixture, illustrating how wires are connected and secured.

4. Pasos finales

13. Once wiring is complete and the compartment cover is closed, restore power at the circuit breaker or fuse box.
14. Test the light fixture using the On/Off switch.

Instrucciones de funcionamiento

1. Encendido y apagado

Use the rocker switch located on the front of the fixture to turn the light ON or APAGADO. If the fixture is connected to a wall switch or timer, you can leave the rocker switch in the ON position and control the light from the external switch.

2. Selección de la temperatura de color (CCT)

The fixture features a slide switch for selecting one of five color temperatures. To change the CCT, simply slide the switch to your desired setting:

• 2700K: Blanco suave
• 3000K: Blanco cálido
3500K: Blanco brillante
• 4000K: Blanco neutro
• 5000K: Luz

Image: The under cabinet light illuminated with a warm white color temperature (e.g., 2700K or 3000K).

Image: The under cabinet light illuminated with a neutral white color temperature (e.g., 4000K or 5000K).

Mantenimiento

To maintain the appearance and performance of your Maxxima LED Under Cabinet Light:

• Asegúrese de que la energía esté desconectada antes de limpiar.
• Limpie el accesorio con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado o los componentes eléctricos.
• No user-serviceable parts are inside. Do not attempt to open or repair the fixture.

Solución de problemas

Presupuesto

Garantía y soporte

This Maxxima LED Under Cabinet Light is covered by a 3 año de garantía a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.

For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webSitio para obtener información de contacto actualizada.