Información importante de seguridad
Lea y comprenda todas las instrucciones antes de comenzar la instalación. Si no las sigue, podría sufrir descargas eléctricas, incendios u otros peligros que podrían causar lesiones personales o daños materiales.
- Desconectar la energía: Always turn off power at the circuit breaker before installing, servicing, or removing the fixture.
- Electricista calificado: La instalación debe ser realizada por un electricista calificado o una persona familiarizada con la construcción y el funcionamiento del producto y los peligros involucrados.
- Toma de tierra: Asegúrese de que el artefacto esté correctamente conectado a tierra para evitar posibles descargas eléctricas.
- Damp Ubicación calificada: Este accesorio es adecuado para damp locations, such as bathrooms and showers, but not for direct water exposure.
- Compatibilidad: Use only with 120 VAC power supply. Do not attempt to modify the fixture.
- Calor: LED fixtures generate heat. Allow adequate ventilation around the fixture.
Producto terminadoview
The Maxxima MRL-61505 is a 5-inch and 6-inch retrofit recessed anti-glare LED downlight designed for easy installation into existing recessed can housings. It offers 1300 lumens of illumination and features 5 selectable color temperatures, ranging from warm white to daylight, to suit various lighting preferences. The fixture is dimmable and includes an E-26 quick connect adapter for convenient setup.
Características principales:
- Eficiencia energética: 15W LED equivalent to 100W incandescent light, reducing energy consumption.
- Brillo alto: Provides 1300 lumens with an anti-glare design.
- 5 CCT Seleccionables: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Regulable: Compatible with most standard LED dimmers, offering a dimming range of 10% to 100%.
- Alto índice de reproducción cromática (IRC): 90 CRI ensures accurate color appearance.
- Construcción duradera: Made with a cast aluminum body for lightweight and robust performance.
- Diseño antideslumbrante: Smooth baffle deep recessed trim minimizes glare.
Figura 1: Frente view of the Maxxima Retrofit Recessed LED Downlight, showing the anti-glare design and E-26 adapter.
Figura 2: Angulado view of the downlight, illustrating the mounting springs for installation into a recessed can.
Vídeo 1: Un finalview of the Maxxima Retrofit Anti-Glare LED Downlight, demonstrating its features and selectable color temperatures.
Configuración e instalación
Follow these steps to properly install your Maxxima LED Downlight:
- Apagar la energía: Before starting, ensure the power to the existing recessed can fixture is turned off at the circuit breaker.
- Remove Existing Trim: Carefully remove the existing bulb and trim from the recessed can.
- Connect E-26 Adapter: Connect the E-26 quick connect adapter (provided) to the fixture's wiring. Then, screw the E-26 adapter into the existing socket of the recessed can.
- Seleccionar temperatura de color (CCT): Locate the CCT selection switch on the back of the downlight. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
- Instalar Downlight: Gently push the wiring and the E-26 adapter into the recessed can. Compress the spring clips on the sides of the downlight and insert the fixture into the can. Release the clips to secure the downlight flush against the ceiling.
- Restaurar energía: Una vez que el downlight esté instalado de forma segura, restablezca la energía en el disyuntor.
Figure 3: Illustration of connecting the E-26 quick connect adapter to the downlight's wiring.
Figura 4: Posterior view of the downlight, highlighting the CCT selection switch.
Figura 5: detallada view of the CCT switch, showing the five color temperature options.
Consejos de instalación:
- Tensión del resorte: If the light does not stay flush, ensure the spring clips are properly engaged with the torsion clips inside the recessed can. Some older cans may require adjustment or the use of compatible mounting clips.
- Wire Clearance: Verify that internal wires within the can are not obstructing the downlight, which could prevent it from seating properly.
Instrucciones de funcionamiento
The Maxxima LED Downlight is designed for simple operation once installed.
Selección de temperatura de color:
The color temperature is set using the switch on the back of the fixture during installation. To change the CCT after installation, you must carefully remove the fixture from the recessed can, adjust the switch, and then reinstall it. The available color temperatures are:
- 2700K: Blanco suave
- 3000K: Blanco cálido
- 3500K: Blanco brillante
- 4000K: Blanco neutro
- 5000K: Luz
Figure 6: Visual guide to the five selectable color temperatures provided by the downlight.
Funcionalidad de atenuación:
This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to achieve optimal performance and avoid flickering or damage.
Mantenimiento
The Maxxima LED Downlight requires minimal maintenance.
- Limpieza: Para limpiar el dispositivo, asegúrese de que esté apagado. Use un paño suave, seco o ligeramente húmedo.amp paño. Evite limpiadores abrasivos, disolventes o productos químicos fuertes, ya que pueden dañar el acabado o los componentes eléctricos.
- Sin reemplazo de bombilla: This fixture features an integrated LED, meaning no bulb replacement is necessary throughout its lifespan.
Solución de problemas
Si tiene problemas con su downlight, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No power, loose connection, faulty fixture. | Check circuit breaker. Verify E-26 adapter is securely screwed in and connections are tight. If problem persists, contact customer support. |
| La luz parpadea o se atenúa incorrectamente. | Atenuador incompatible, cableado suelto. | Ensure dimmer is LED compatible. Check all electrical connections. |
| Light does not sit flush with the ceiling. | Spring clips not engaged, internal obstruction, insufficient spring tension. | Ensure spring clips are fully engaged with the can's torsion clips. Check for wires or insulation obstructing the fixture. Adjust spring tension if necessary by gently bending the springs closer together at the top. |
| Temperatura de color incorrecta. | El interruptor CCT está configurado incorrectamente. | Remove fixture, adjust CCT switch to desired setting, and reinstall. |
Presupuesto
| Característica | Detalle |
|---|---|
| Nombre del modelo | LMR-61505 |
| Marca | maxxima |
| Dimensiones del producto | 7.1" de largo x 7.1" de ancho x 4.5" de alto |
| Quétage | 15 vatios |
| Brillo | 1300 lúmenes |
| Temperatura de color | 2700K/3000K/3500K/4000K/5000K Selectable |
| CRI | 90 |
| Volumentage | 120 voltios (CA) |
| Regulable | Sí (10% - 100%) |
| Ángulo del haz | 36° |
| Material | Aluminio |
| Tipo de instalación | Flush Mount (Retrofit for 5" & 6" cans) |
| Base de la bombilla | E26 Quick Connect Adapter |
| Lifetime Hours | 50,000 horas |
| Certificaciones | ETL Listed, T20 California Compliant |
| Peso del artículo | 1.5 libras |
| Uso en interiores y exteriores | Interior (Damp Calificado) |
Información de garantía
The Maxxima MRL-61505 LED Downlight comes with a 3 año de garantía from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Atención al cliente
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webSitio para obtener la información de contacto más actualizada.
