Philips AMF870/35

Philips 8000 Series AMF870/35 3-in-1 Air Purifier, Fan, and Heater

Manual de usuario

Introducción

This manual provides essential information for the safe and effective use of your Philips 8000 Series AMF870/35 3-in-1 Air Purifier, Fan, and Heater. Please read it thoroughly before operating the appliance and retain it for future reference.

Philips 8000 Series 3-in-1 Air Purifier, Fan, and Heater front view

Frente view of the Philips 8000 Series AMF870/35 appliance.

Configuración

Desembalaje

Carefully remove the appliance from its packaging. Ensure all components are present: the main unit, remote control, and power cord. Inspect the unit for any damage incurred during shipping. Do not use if damaged.

Instalación de filtros

The appliance comes with a HEPA filter and an active carbon filter. These filters are crucial for air purification. Follow these steps to install or replace them:

  1. Asegúrese de que el aparato esté desenchufado de la toma de corriente.
  2. Locate the filter compartment cover, typically at the base of the unit.
  3. Open the cover and insert the filters according to the markings, ensuring they are seated correctly.
  4. Cierre bien la tapa del compartimento del filtro.
Woman installing filter into the Philips 8000 Series air purifier

A user installing the filter into the base of the air purifier.

Explotó view of Philips 8000 Series air purifier filters

un estallido view illustrating the multi-layer filtration system, including HEPA and active carbon filters.

Colocación

Place the appliance on a stable, level surface. Ensure there is adequate space around the unit for proper airflow (at least 20 cm from walls or furniture). Avoid placing it near heat sources or in direct sunlight. For optimal air purification, place it in the center of the room.

Conexión de energía

Conecte el cable de alimentación a una toma de corriente con conexión a tierra. El aparato ya está listo para funcionar.

Operación del aparato

Controles básicos

The appliance can be controlled via the integrated display, the included remote control, or the Philips Air+ mobile application.

Philips 8000 Series remote control

The remote control for the Philips 8000 Series appliance.

Hand using remote control with Philips 8000 Series air purifier

A hand operating the appliance using the remote control.

Encendido/apagado

Press the power button on the unit or the remote control to turn the appliance on or off. The display will illuminate when the unit is active.

Modos de funcionamiento

  • Modo de purificación de aire: The appliance actively filters airborne particles and gases. The display may show air quality readings.
  • Modo de ventilador: Provides a cooling airflow without heating. Adjust fan speed as desired.
  • Modo de calefacción: Provides warm airflow. Set the desired temperature or heat level.
Philips 8000 Series air purifier showing blue airflow for cooling/purification

The appliance operating in purification or fan mode, indicated by blue airflow.

Philips 8000 Series air purifier showing red airflow for heating

The appliance operating in heating mode, indicated by red airflow.

Ajuste de la configuración

Use the buttons on the remote control or the unit's interface to adjust fan speed, heating temperature, oscillation, and other settings. Refer to the on-screen display for current settings and air quality information.

Philips 8000 Series air purifier in a bedroom at night, showing digital display

The digital display on the appliance showing current settings and air quality.

Air+ App Control

Download the Philips Air+ app from your device's app store. Follow the in-app instructions to connect your appliance for remote control, scheduling, and detailed air quality monitoring.

Mantenimiento

Reemplazo de filtro

The appliance's filters have a limited lifespan. The display will indicate when a filter needs replacement. Always use genuine Philips replacement filters to ensure optimal performance.

  1. Desconecte el aparato.
  2. Abra el compartimento del filtro.
  3. Retire los filtros viejos y deséchelos adecuadamente.
  4. Install new filters as described in the Setup section.
  5. Reset the filter lifetime indicator on the appliance or via the app after replacement.

Limpieza de la unidad

Regular cleaning helps maintain performance and appearance.

  • Desenchufe siempre el aparato antes de limpiarlo.
  • Limpie las superficies exteriores con un paño suave, damp Paño. No utilice limpiadores abrasivos ni disolventes.
  • Gently vacuum the air inlet and outlet grilles to remove dust accumulation.
  • No sumerja el aparato en agua ni en ningún otro líquido.

Almacenamiento

If storing the appliance for an extended period, ensure it is clean and dry. Store it in a cool, dry place, preferably in its original packaging, away from direct sunlight and extreme temperatures.

Solución de problemas

Si tiene problemas con su electrodoméstico, consulte los siguientes problemas y soluciones comunes:

ProblemaPosible causaSolución
El aparato no enciendeNot plugged in; Power outlet issue; Power button not pressedVerifique la conexión del cable de alimentación; pruebe la toma de corriente con otro dispositivo; presione el botón de encendido firmemente.
Sin flujo de aire o flujo de aire débilAir inlets/outlets blocked; Filter clogged; Fan speed too lowClear any obstructions; Check/replace filters; Increase fan speed.
Sin calor o calor insuficienteHeating mode not activated; Temperature setting too low; Overheat protection activatedActivate heating mode; Increase temperature setting; Unplug and allow to cool for 30 minutes.
La calidad del aire no mejoraFilters are old/clogged; Room size exceeds capacity; Doors/windows openReplace filters; Ensure appliance is suitable for room size; Close doors and windows.
El control remoto no funcionaPilas agotadas; Obstrucción entre el control remoto y la unidadReplace remote control batteries; Ensure clear line of sight to the unit.

Si el problema persiste después de probar estas soluciones, comuníquese con el servicio de atención al cliente de Philips.

Presupuesto

CaracterísticaDetalle
Número de modeloAMF870/35
MarcaPhilips
ColorGris
FuncionesAir Purifier, Fan, Heater (3-in-1)
Área de piso recomendadaHasta 70 metros cuadrados
Tasa de suministro de aire limpio (CADR)270 m³/h
Tipo de filtroHEPA, Carbón activo
Nivel de ruido36 dB
Método de controlRemote Control, Philips Air+ App
Fuente de poderEléctrico con cable
Peso del artículo3.33 kilogramos
Dimensiones del producto (Pr. x An. x Al.)38.6 cm x 38.6 cm x 115.2 cm
Dimensions of Philips 8000 Series air purifier: 38.6cm width, 38.6cm depth, 115.2cm height

Detailed dimensions of the Philips 8000 Series AMF870/35 appliance.

Garantía y soporte

Información de garantía

This Philips appliance is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

Atención al cliente

For further assistance, technical support, or to purchase replacement parts and filters, please visit the official Philips webSitio web o contacte con el departamento de atención al cliente. Puede encontrar información de contacto en el sitio web de Philips. websitio web o en la documentación de su producto.

Visita el Tienda Philips en Amazon Para más productos e información.