1. Información importante de seguridad
Read all instructions before using this product. Failure to follow these instructions may result in serious injury or property damage.
- Do not use this product if you have had oral or gum surgery in the previous 2 months. Consult your dentist if excessive bleeding occurs after using this product or if bleeding continues after 1 week of use.
- This appliance contains no user-serviceable parts. Do not modify or attempt to repair the appliance.
- Keep the charging base away from water. Do not place or store the product where it can fall or be pulled into a tub or sink.
- This product is designed for cleaning teeth, gums, and tongue only. Do not use it for any other purpose.
- Supervise children when using this product. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction.
2. Producto terminadoview
Componentes

This image displays the Philips Sonicare 4300 Series electric toothbrush in white, featuring a light blue power button. It is shown standing on its charging base. To the right, a white travel case is visible, designed to protect the toothbrush and a brush head during transport.
- A. Cabezal de cepillo
- B. Mango
- C. Botón de encendido/apagado
- D. Intensity indicator (Low/High)
- E. Pressure sensor light ring
- F. Indicador de batería
- G. Charging base
- H. Travel case
3. Configuración
3.1 Carga del cepillo de dientes
- Place the handle on the charging base.
- Enchufe la base de carga en un tomacorriente.
- The battery indicator will flash to show the toothbrush is charging. A full charge takes approximately 24 hours.
- The battery indicator will glow solid green when fully charged.
3.2 Colocación del cabezal del cepillo
Align the brush head with the handle so the bristles face the same direction as the power button. Push the brush head down firmly onto the metal shaft until it stops.
4. Instrucciones de funcionamiento
4.1 Cepillarse los dientes
- Humedezca las cerdas y aplique una pequeña cantidad de pasta de dientes.
- Coloque el cabezal del cepillo contra sus dientes en un ligero ángulo hacia la línea de las encías.
- Presione el botón de encendido para encender el cepillo de dientes.
- Gently move the brush head slowly across your teeth in small back-and-forth motions, allowing the Sonicare to do the work.
- Continue brushing for the full 2-minute cycle.
4.2 Smartimer and QuadPacer
- Smartimer: The toothbrush automatically turns off after 2 minutes of brushing, indicating that you have brushed for the dentist-recommended time.
- QuadPacer: This feature beeps at 30-second intervals to signal when to move to the next quadrant of your mouth, ensuring thorough cleaning.
4.3 Sensor de presión
The toothbrush features a built-in pressure sensor. If you apply too much pressure during brushing, the light ring on the handle will illuminate. Reduce pressure to turn off the light and protect your gums and teeth.
4.4 Modes and Intensity
The Philips Sonicare 4300 Series offers one cleaning mode with two intensity settings (Low and High).
- To change intensity, press the power button repeatedly while the toothbrush is on. The intensity indicator lights will show the current setting.
- The toothbrush remembers your last selected intensity setting for the next use.
5. Mantenimiento
5.1 Limpieza
- Después de cada uso, enjuague bien el cabezal del cepillo y las cerdas con agua corriente.
- Limpie el mango con publicidad.amp Paño. No sumerja el mango en agua.
- Limpie periódicamente la base de carga con adamp paño. Asegúrese de que esté desenchufado antes de limpiarlo.
5.2 Almacenamiento
Store the toothbrush in a clean, dry place. If storing for an extended period, ensure the battery is fully charged before storage and recharge every 6 months.
5.3 Reemplazo del cabezal del cepillo
Replace your brush head every 3 months, or sooner if the bristles are splayed or worn. Worn bristles are less effective at cleaning.
6. Solución de problemas
6.1 Problemas comunes
- El cepillo de dientes no se enciende: Ensure the battery is charged. Place the handle on the charging base for at least 24 hours.
- Toothbrush stops during use: The battery may be low. Recharge the toothbrush.
- Pressure sensor light activates frequently: You may be brushing too hard. Reduce the pressure applied to your teeth and gums.
- Eficacia reducida del cepillado: Replace the brush head. Ensure the brush head is securely attached to the handle.
- Battery indicator not working: Ensure the toothbrush is correctly placed on the charging base and the base is plugged in.
7. Especificaciones
7.1 Datos técnicos
| Característica | Especificación |
|---|---|
| Marca | PHILIPS |
| Número de modelo | HX6807/28 |
| Color | White/Mint |
| Number of Intensities | 2 |
| Compatibilidad | Adulto |
| Características especiales | LED Indicators, Pressure Sensor |
| Peso del artículo | 510 gramos |
| Fuente de poder | Funciona con pilas |
| Tecnología de baterías | Iones de litio (Li-Ion) |
| Vol de entrada de CAtage | 110 - 220 V |
| Temporizador de 2 minutos | Sí |
| Sensor de presión | Sí |
| Estuche de viaje | Sí |
8. Garantía y soporte
8.1 Información de garantía
This Philips Sonicare product is covered by a Garantía limitada de 2 años from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, neglect, unauthorized modification, or normal wear and tear.
Conserve su comprobante de compra para reclamos de garantía.
8.2 Atención al cliente
For product support, troubleshooting assistance, or warranty service, please visit the official Philips website or contact Philips customer service in your region. Refer to the contact information provided in your product packaging or on the Philips websitio.