1. Introducción
The DigiTech Bass Whammy is an advanced pitch shifting effect pedal designed specifically for bass guitar. It utilizes sophisticated pitch detection and polyphonic note tracking technology to deliver a wide range of expressive effects. This manual provides essential information for setting up, operating, and maintaining your Bass Whammy pedal.
2. ¿Qué hay en la caja?
- 1 x DigiTech Bass Whammy Effect Pedal
- 1 fuente de alimentación (9 V CC).
- 2 x Strukture Right-Angle Guitar Patch Cable (6 in.)
- 2 x Strukture Rubber Instrument Cable
3. Configuración
Figura 1: Arriba view of the DigiTech Bass Whammy Effect Pedal.
3.1 Conexión de alimentación
Connect the included 9V DC power supply to the pedal's power input jack. Ensure the power supply is compatible with the pedal's voltage requisitos para evitar daños.
3.2 Conexiones de audio
- Conecte su bajo a la APORTE jack on the pedal using one of the provided instrument cables.
- Conectar el PRODUCCIÓN toma del pedal a tu amplifier or next effect pedal in the signal chain using another instrument cable.
- The pedal features true bypass, ensuring your signal remains unaffected when the pedal is disengaged.
3.3 Control MIDI
The Bass Whammy is MIDI controllable, allowing for external control over its functions. Connect a MIDI cable from your MIDI controller to the pedal's MIDI input for advanced integration into your setup.
4. Modos de funcionamiento y controles
The Bass Whammy offers various pitch shifting modes and controls for creative sound manipulation.
Selección de 4.1 modos
Utilice el HARMONY/WHAMMY selector switch to choose between two main categories of effects:
- ARMONÍA: Adds a harmonized note to your original signal.
- WHAMMY: Shifts your original note up or down by a selected interval.
4.2 Interval Selection
Once a mode is selected, use the rotary knob to choose the specific pitch interval for the effect. Available intervals include various octaves, 4ths, 5ths, and more. The LEDs next to the intervals indicate the currently selected setting.
4.3 Detune
El SHALLOW DETUNE / DEEP DETUNE switch allows you to apply a subtle or more pronounced detuning effect to your signal, adding chorus-like textures.
4.4 Dive Bomb
El BOMBA DE BUCEO setting, typically found within the WHAMMY mode, allows for extreme downward pitch shifts, mimicking the sound of a guitar tremolo bar dive.
Pedal de expresión 4.5
The integrated expression pedal controls the pitch shift amount. Moving the pedal from heel to toe smoothly transitions the pitch through the selected interval.
4.6 Bypass Footswitch
Press the bypass footswitch to engage or disengage the effect. An indicator LED will illuminate when the effect is active.
5. Especificaciones
| Característica | Especificación |
|---|---|
| Peso del artículo | 2 libras |
| Dimensiones del producto | 7.75 x 6.5 x 2.5 pulgadas |
| Fuente de poder | Eléctrico con cable (9 V CC) |
| Volumentage | 9 voltios |
| Tipo de conector | Conector de audio mono de 1/4 de pulgada (6.35 mm) |
| Formato de señal | Cosa análoga |
| Control MIDI | Sí |
| Tipo de derivación | True bypass |
6. Mantenimiento
To ensure the longevity and optimal performance of your Bass Whammy pedal, follow these maintenance guidelines:
- Limpieza: Utilice un paño suave y seco para limpiar el exterior del pedal. Evite limpiadores abrasivos o disolventes.
- Almacenamiento: Guarde el pedal en un ambiente seco, alejado de temperaturas extremas y de la luz solar directa.
- Fuerza: Always use the specified 9V DC power supply. Disconnect power when the pedal is not in use for extended periods.
7. Solución de problemas
If you encounter issues with your Bass Whammy, try the following steps:
- Sin sonido: Check all cable connections (input, output, power). Ensure the power supply is working and correctly connected. Verify your instrument and amplifier are functioning.
- Poor Pitch Tracking: Ensure your instrument's intonation is correct. Try adjusting your playing dynamics.
- Ruido no deseado: Check for faulty cables. Ensure the power supply is stable and free from interference. If using other pedals, isolate the Bass Whammy to determine if it's the source of the noise.
- El pedal no responde: Disconnect and reconnect the power supply. Check MIDI connections if external control is being used.
If problems persist, consult the DigiTech support websitio o póngase en contacto con el servicio de atención al cliente.
8. Garantía y soporte
The DigiTech Bass Whammy Effect Pedal comes with a limited manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, product registration, or further assistance, visit the official DigiTech websitio o comuníquese con su departamento de servicio al cliente.
