1. Producto terminadoview
The OREI HD-602 is a versatile 6x2 HDMI Matrix Switch/Splitter designed to manage multiple HDMI sources and displays. It allows you to connect up to six HDMI input devices and distribute their signals to two independent HDMI output displays. This device supports advanced video and audio formats, ensuring high-quality transmission without signal degradation.
Las funcionalidades clave incluyen:
- Full Matrix Function: Independently switch any of the six HDMI input sources to either of the two HDMI output displays.
- Señal Amplificación: Features a built-in auto-adjusting amplifier to regenerate the HDMI signal, preventing loss over longer cable runs.
- Uso flexible: Can function as a switch (multiple inputs, one output) or a splitter (one input, multiple outputs) depending on your setup.
2. Contenido del paquete
Al abrir el paquete, verifique que estén incluidos todos los siguientes elementos:
- OREI HD-602 HDMI Matrix Switch/Splitter Unit
- Adaptador de corriente continua de 5V
- Mando a distancia por infrarrojos (IR)
- Manual de usuario
Image: The OREI HD-602 unit and its included remote control.
Image: The OREI HD-602 unit, remote control, and power adapter, representing the typical package contents.
3. Características y especificaciones
3.1. Características principales
- Connects 6 HDMI sources to 2 HDMI displays.
- Supports Ultra HD resolutions up to 4K/2K (3840x2160) at 30Hz.
- Compatible with 3D/2D video formats.
- Deep Color support up to 48-bit.
- Audio EDID features for forcing audio output to Auto (same as source), 2.1ch, 5.1ch, or 7.1ch.
- Convenient remote control for input selection.
- Metal enclosure for enhanced durability and interference reduction.
3.2. Especificaciones técnicas
| Dimensiones del producto | 6 x 7 x 5 pulgadas |
| Peso del artículo | 1 libra |
| Número de modelo | HD-602 |
| Tipo de conector | HDMI |
| Puertos de entrada | 6 HDMI (female type) |
| Puertos de salida | 2 HDMI (female type) |
| Frecuencia de ancho de banda | 2.25Gbps (single link) |
| Estándares de audio compatibles | LPCM, Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD Master Audio |
| Dispositivos compatibles | Television, Monitor, Projector, Gaming Console, Personal Computer, Streaming Devices (Roku), Cable Boxes, Home Surveillance Systems |
Image: Visual representation of the HD-602's compact size and dimensions.
Image: A list of audio standards supported by the HD-602, including LPCM, Dolby AC3, DTS 7.1, DSD/Dolby TrueHD/DTS-HD Master Audio.
Imagen: Examples of various devices compatible with the OREI HD-602, such as streaming devices, cable boxes, game consoles, and computers.
4. Instrucciones de configuración
Follow these steps to set up your OREI HD-602 HDMI Matrix Switch/Splitter:
- Conectar fuentes de entrada HDMI: Connect your HDMI source devices (e.g., Blu-ray player, game console, cable box) to the HDMI Input ports (IN 1 to IN 6) on the rear of the HD-602 unit using high-quality HDMI cables.
- Conectar pantallas de salida HDMI: Connect your HDMI display devices (e.g., TV, monitor, projector) to the HDMI Output ports (OUT A and OUT B) on the rear of the HD-602 unit.
- Conecte la electricidad: Plug the provided 5V DC power adapter into the 'DC 5V' port on the rear of the HD-602, then plug the adapter into a power outlet.
- Encendido: Flip the 'ON/OFF' switch on the front panel to the 'ON' position. The power indicator LED will illuminate.
- Autoprueba inicial: The unit will perform a brief self-test to verify HDMI connections. Displays may momentarily go blank before showing a signal.
Image: A diagram illustrating how to connect various input devices (laptop, game console, media player) to the HD-602 and how the two outputs connect to separate displays (TVs) and an audio system.
Video: An official OREI video demonstrating the unboxing, a closer look at the unit's ports and controls, and a practical setup guide for the HD-602 HDMI Matrix Switch/Splitter. This video provides visual instructions for connecting input sources and output displays, as well as powering on the device.
5. Instrucciones de funcionamiento
The OREI HD-602 offers flexible control options for managing your HDMI signals.
5.1. Controles del panel frontal
Imagen: Un primer plano view of the HD-602's front panel, highlighting the power switch, input selection buttons for each output, and EDID configuration switches.
- Interruptor de alimentación: Enciende o apaga la unidad.
- Input Selection Buttons (OUT A / OUT B): Press the 'OUT A' or 'OUT B' buttons repeatedly to cycle through the available HDMI input sources (IN 1 to IN 6) for the respective output display. The corresponding LED will indicate the currently selected input.
- Interruptores EDID: These switches allow you to configure the Extended Display Identification Data (EDID) settings for audio. You can select between 2.1ch, 5.1ch, or 7.1ch audio output, or 'Auto' to match the source's audio format. Adjust these settings if you experience audio compatibility issues.
- Receptor IR: The small window on the front panel receives signals from the remote control. Ensure it is not obstructed.
5.2. Operación de control remoto
El control remoto IR incluido proporciona un funcionamiento inalámbrico cómodo:
- Botones de entrada (1-6): Directly select an HDMI input source for the currently active output.
- Output Selection Buttons (OUT A / OUT B): Use these buttons to specify which output (A or B) you want to control. Once an output is selected, use the input buttons (1-6) to choose the desired source for that output.
- Botón de encendido: Enciende o apaga la unidad.
6. Mantenimiento
To ensure the longevity and optimal performance of your OREI HD-602, follow these maintenance guidelines:
- Limpieza: Use a soft, dry cloth to clean the unit. Avoid using liquid or aerosol cleaners, which may damage the device.
- Ventilación: Ensure the unit has adequate ventilation. Do not block the ventilation openings on the sides of the device.
- Almacenamiento: Guarde el dispositivo en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas cuando no lo utilice durante períodos prolongados.
- Sistema de organización de cables: Keep HDMI cables neatly organized and avoid excessive bending or tension, which can damage the cables or ports.
7. Solución de problemas
If you encounter issues with your OREI HD-602, refer to the following troubleshooting tips:
- Sin imagen/sonido:
- Verifique que todos los cables HDMI estén conectados de forma segura tanto a las fuentes de entrada como a las pantallas de salida.
- Ensure the HD-602 unit is powered on and the power indicator LED is lit.
- Check that the correct input source is selected for each output display using the front panel buttons or remote control.
- Test with different HDMI cables or input sources to rule out faulty components.
- Adjust the EDID settings on the front panel to ensure compatibility with your audio system.
- Señal intermitente:
- Ensure HDMI cables are of good quality and within recommended length limits for your resolution (especially for 4K).
- Compruebe si hay conexiones sueltas.
- Minimize electromagnetic interference by keeping the unit away from other electronic devices.
- El control remoto no funciona:
- Ensure there are no obstructions between the remote control and the IR receiver on the front of the unit.
- Revise y reemplace las baterías del control remoto si es necesario.
For further assistance, consult the complete user manual or contact OREI customer support.
8. Garantía y soporte
The OREI HD-602 HDMI Matrix Switch/Splitter comes with a Garantía del fabricante de 12 meses, covering defects in materials and workmanship under normal use. Additionally, OREI provides Lifetime OREI Tech Support para sus productos.
For technical assistance, warranty claims, or any product-related inquiries, please contact OREI customer support:
- Correo electrónico: info@orei.com
Conserve su comprobante de compra para el servicio de garantía.
