KENT AN_51246

Manual del usuario del purificador de agua KENT Super Plus RO

Model: AN_51246

1. Introducción

The KENT Super Plus RO Water Purifier is designed to provide 100% pure and safe drinking water through its advanced multiple purification process. This system combines RO (Reverse Osmosis), UF (Ultra Filtration), and TDS (Total Dissolved Solids) Control to remove dissolved impurities such as arsenic, rust, pesticides, and fluorides, while also eliminating bacteria and viruses. The integrated TDS control system allows for adjustment of the purified water's TDS level, ensuring essential natural minerals are retained for healthier drinking water.

KENT Super Plus RO Water Purifier

Image: KENT Super Plus RO Water Purifier, showcasing su elegante diseño y componentes internos.

2. Instrucciones de seguridad

Lea atentamente todas las instrucciones de seguridad antes de utilizar el aparato para evitar lesiones o daños. Conserve este manual para futuras consultas.

  • Asegúrese de que la fuente de alimentación coincida con las especificaciones que figuran en la etiqueta del producto.
  • No sumerja el aparato, el cable o el enchufe en agua u otros líquidos.
  • Unplug the purifier from the power outlet when not in use, before cleaning, or during maintenance.
  • No utilice el aparato si el cable o el enchufe están dañados, o si se ha caído o dañado de cualquier manera.
  • Mantenga a los niños alejados del aparato durante su funcionamiento.
  • Install the purifier in a location away from direct sunlight, heat sources, and corrosive chemicals.
  • Asegure una ventilación adecuada alrededor de la unidad.
  • Only use genuine KENT spare parts for replacement to ensure optimal performance and safety.

3. Contenido del paquete

Al desembalar, verifique que todos los elementos enumerados a continuación estén presentes y sin daños:

  • Main Unit (KENT Super Plus RO Water Purifier)
  • Tarjeta de garantía
  • Manual de usuario (este documento)

Note: A pre-filter is not included with this package and may need to be purchased separately depending on your water source quality.

4. Configuración e instalación

The KENT Super Plus RO Water Purifier is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and adherence to safety standards.

4.1 Selección del sitio

  • Choose a flat, stable wall surface near a water supply and a power outlet.
  • Ensure adequate space around the unit for maintenance and air circulation.
  • Avoid direct sunlight or areas prone to extreme temperatures.

4.2 Pasos de instalación (másview)

  1. Mark the drilling points on the wall using the provided template (if applicable).
  2. Taladre agujeros e inserte tacos de pared.
  3. Mount the purifier securely on the wall.
  4. Connect the raw water inlet pipe to the water supply.
  5. Connect the purified water outlet pipe to the dispenser tap.
  6. Connect the reject water pipe to a drain.
  7. Asegúrese de que todas las conexiones sean seguras y sin fugas.
  8. Conecte el cable de alimentación a una toma eléctrica adecuada.
Multiple Purification Process Diagram

Imagen: Diagrama que ilustra el multi-stage purification process including Sediment Filter, Carbon Filter, RO Membrane, TDS Controller, UF Membrane, and Post Carbon Filter, leading to 100% Pure Water.

5. Instrucciones de funcionamiento

Once installed and connected, the KENT Super Plus RO Water Purifier operates largely automatically.

5.1 Puesta en marcha inicial

  1. Turn on the raw water supply.
  2. Plug in the power cord. The purifier will begin the purification process.
  3. Allow the storage tank to fill completely. The purification process will stop automatically once the tank is full.
  4. For the first use, discard the first two full tanks of purified water to flush out any manufacturing residues.

5.2 Dispensación de agua

  • Place a clean container under the dispenser tap.
  • Turn the tap handle to dispense purified water.
  • The purifier will automatically start purifying water again as the water level in the storage tank drops.

5.3 Indicador de nivel de agua

The purifier features a water level indicator on the front panel, allowing you to easily monitor the amount of purified water available in the 8-liter storage tank.

The purification capacity of this unit is approximately 15 liters per hour, depending on the input water pressure and TDS levels.

6. Mantenimiento

Regular maintenance is crucial for the optimal performance and longevity of your KENT Super Plus RO Water Purifier.

6.1 Reemplazo del filtro

The purification system relies on various filters and membranes. The lifespan of these components depends on the quality of the input water and usage volume. It is recommended to replace filters and membranes periodically as advised by KENT service personnel or when the water flow rate significantly decreases or taste changes.

  • Sediment Filter & Carbon Filter: Typically replaced every 6-12 months.
  • RO Membrane & UF Membrane: Typically replaced every 1-2 years, or as needed.
  • Post filtro de carbón: Typically replaced every 6-12 months.

Always use genuine KENT replacement parts. Contact authorized service centers for filter replacement.

6.2 Limpieza de la unidad

  • Unplug the purifier before cleaning.
  • Limpie el exterior de la unidad con un paño suave yamp Paño. No utilice limpiadores abrasivos ni disolventes.
  • Clean the storage tank periodically by draining and rinsing it.

7. Solución de problemas

If you encounter any issues with your KENT Super Plus RO Water Purifier, refer to the common problems and solutions below. If the problem persists, contact KENT customer support.

ProblemaPosible causaSolución
No hay dispensación de aguaNo power; Water supply off; Tank empty; Clogged filters/membrane.Check power connection; Turn on water supply; Wait for tank to fill; Contact service for filter check.
Flujo de agua lentoLow input water pressure; Clogged filters/membrane.Check input water pressure; Contact service for filter replacement.
Sabor/olor inusual en el aguaExpired filters/membrane; Contaminated tank.Replace filters/membrane; Clean storage tank.
Fuga de aguaLoose connections; Damaged components.Check all pipe connections; Contact service immediately.

8. Especificaciones

CaracterísticaDetalle
MarcaKENT
Nombre del modeloAN_51246
Característica especial500-1999ppm, RO
Tipo de instalaciónMontado en la pared
Fuente de poderEléctrico con cable
Peso del artículo7.35 kg (7350 gramos)
Caudal máximo15 litros por hora
Capacidad de almacenamiento8 litros
ColorBlanco
Dimensiones del producto (LxAnxAl)50.5 x 38 x 27 centímetros
FabricanteKENT RO
País natalIndia

9. Garantía y soporte

Your KENT Super Plus RO Water Purifier comes with a comprehensive warranty and support package:

  • Garantía: 1 año de garantía a partir de la fecha de compra.
  • Servicio extendido: 3 years extended service free (Terms and Conditions apply).

For any service requests, technical assistance, or to inquire about terms and conditions for extended service, please contact KENT customer support. Ensure you have your product model number (AN_51246) and purchase details ready when contacting support.

Para más información, puede visitar la página oficial KENT Store on Amazon.

Documentos relacionados - AN_51246

Preview Purificador de agua KENT Supreme Mineral RO: Manual de instrucciones
Manual de instrucciones completo para el purificador de agua KENT Supreme Mineral RO, que detalla su tecnología, características, instalación, funcionamiento, mantenimiento y especificaciones técnicas.
Preview Purificador de agua KENT Sapphire RO: Manual del usuario, características y especificaciones
Guía completa del purificador de agua KENT Sapphire RO+UF+UV+Alkaline+TDS Control+UV LED en tanque. Conozca su avanzada tecnología de purificación, características principales, instalación, mantenimiento, instrucciones de seguridad y especificaciones técnicas detalladas.
Preview Manual de instrucciones del purificador de agua KENT Grand Mineral RO
Manual de instrucciones completo para el purificador de agua KENT Grand Mineral RO, que detalla su tecnología, características, instalación, funcionamiento, mantenimiento y especificaciones técnicas. Incluye información sobre ósmosis inversa, ultrafiltración, purificación UV en el tanque y control de sólidos totales disueltos (TDS).
Preview Purificador de agua KENT Wonder Mineral RO: Instalación, funcionamiento y especificaciones
Una guía completa para el purificador de agua KENT Wonder Mineral RO™, que detalla su tecnología, características, pasos de instalación, funcionamiento, mantenimiento y especificaciones técnicas.
Preview Purificador de agua KENT ACE LITE Mineral RO™: Manual de instalación, funcionamiento y mantenimiento
Manual de instrucciones completo para el purificador de agua KENT ACE LITE Mineral RO™, que cubre la instalación, el funcionamiento, el mantenimiento, las especificaciones técnicas y las pautas de seguridad.
Preview Purificador de agua mineral RO KENT Grand Plus-B: Purificación avanzada para una vida saludable
Explore el purificador de agua KENT Grand Plus-B Mineral RO™, diseñado para agua potable 100 % pura con minerales esenciales. Conozca su avanzada tecnología de control de RO+UV+UF+TDS, Zero Water Was.tagFunciones, funcionamiento automático, guía de instalación, consejos de mantenimiento y especificaciones técnicas detalladas.