1. Introducción
The Behringer MDX1400 Autocom Pro is an interactive stereo dynamics processor designed for professional audio applications. It features a comprehensive set of tools including an expander/gate, compressor/limiter, and dynamic enhancer, allowing for precise control over audio signals. This unit is suitable for various studio and live sound environments, providing both automatic and manual control options for dynamic processing.
This manual provides detailed instructions for the setup, operation, and maintenance of your MDX1400 Autocom Pro to ensure optimal performance and longevity.
2. Características principales
- Interactive Reference-Class 2-Channel Expander / Gate / Compressor / Enhancer.
- IKA (Interactive Knee Adaptation) compressor concept combines the advantages of "hard knee" and "soft knee" characteristics.
- Switchable high-pass filter in control signal path avoids low-frequency signals from dominating compressor.
- IRC circuit in expander/gate enables "inaudible" elimination of disturbing noise signals.
- Dynamic Enhancer for compression dependent equalization.
- Auto and manual mode compression.
- Separate IRC expander/gate circuits.
- Fully automatic or manually controllable attack and release times.
- Dual-mono or stereo ("true stereo") operation.
- Precise 12-segment LED displays for input/output levels and gain reduction.
- Switchable, external side chain input with side chain monitor function.
- Operating level switchable from +4 dBu to -10 dBV.
- Servo-balanced inputs and outputs.
- XLR and jack connectors.
3. Configuración
Before connecting your MDX1400, ensure all audio equipment is powered off to prevent damage. The unit is designed for standard 19-inch rack mounting.
3.1 Conexión de alimentación
Connect the supplied power cord to the AC inlet on the rear panel of the MDX1400 and then to a suitable power outlet. Ensure the voltage coincide con los requisitos de la unidad.
3.2 Conexiones de audio
The MDX1400 features balanced XLR and 1/4" TRS jack connectors for both inputs and outputs. It operates as a two-channel unit, allowing for independent processing of two mono signals or linked stereo operation.
- Entradas: Connect your audio source (e.g., mixer output, microphone preamplifier) to the INPUT connectors.
- Salidas: Connect the OUTPUT connectors to the next stage in your audio chain (e.g., power amplifier, recording interface).
- Cadena lateral: The sidechain inputs and outputs allow for external control of the compressor/gate. For example, a kick drum signal can be used to "duck" a bass guitar track.
Figura 3.2.1: Rear panel connections of the MDX1400. This image displays the XLR and 1/4" TRS jack inputs, outputs, and sidechain connections for both channels, along with the power inlet.
3.3 Operating Level Switch
On the rear panel, locate the operating level switch. Set it to +4 dBu for professional studio equipment or -10dBV for consumer-level equipment. Incorrect setting can lead to signal distortion or low signal-to-noise ratio.
4. Instrucciones de funcionamiento
The MDX1400 offers intuitive controls for dynamic processing. Each channel has identical controls for independent or stereo-linked operation.
Figura 4.0.1: Panel frontal sobreview of the MDX1400. This image shows the layout of all controls, switches, and LED meters for both channels.
4.1 Expander/Gate Section
The expander/gate section is used to reduce unwanted noise and improve signal clarity by attenuating signals below a set threshold.
- UMBRAL: Sets the level below which the gate/expander will activate. Turn clockwise to increase the threshold (more aggressive gating).
- LANZAMIENTO: Controls how quickly the gate closes after the signal drops below the threshold. "FAST" for quick cuts, "SLOW" for smoother transitions.
- SC MON (Sidechain Monitor): Activates monitoring of the sidechain signal.
- SC EXT (Sidechain External): Engages the external sidechain input for the gate.
Figura 4.1.1: Detallado view of channel 1 controls. This image highlights the Expander/Gate, Compressor/Limiter, and Enhancer sections, showing their respective knobs and switches.
4.2 Compressor/Limiter Section
This section controls the dynamic range of your audio, making loud signals quieter and quiet signals louder, resulting in a more consistent and impactful sound.
- UMBRAL: Sets the level at which compression begins. Signals above this threshold will be compressed.
- PROPORCIÓN: Determines the amount of compression applied. A ratio of 4:1 means that for every 4dB increase in input level above the threshold, the output level will only increase by 1dB.
- ATAQUE: Controls how quickly the compressor reacts to signals exceeding the threshold. "AUTO" provides automatic adjustment.
- LANZAMIENTO: Controls how quickly the compressor returns to its uncompressed state after the signal drops below the threshold. "AUTO" provides automatic adjustment.
- SALIDA: Adjusts the overall output level of the compressed signal.
- INTERACTIVE: Engages the IKA (Interactive Knee Adaptation) feature for a more natural compression characteristic.
- FILTRO SC: Activates a high-pass filter in the sidechain path to prevent low frequencies from triggering compression.
- LIMITADOR: Engages the peak limiter function, preventing the signal from exceeding a set maximum level.
4.3 Enhancer Section
The dynamic enhancer adds clarity and presence to the compressed signal by subtly boosting high and low frequencies.
- PROCESO: Activates the enhancer.
- SALIDA: Adjusts the amount of enhancement applied.
4.4 Stereo Link Operation
Presione el ENLACE ESTÉREO button to link both channels for true stereo operation. In this mode, the controls of channel 1 will affect both channels equally, ensuring consistent dynamic processing for stereo sources.
4.5 LED Meters
The 12-segment LED meters provide visual feedback on input/output levels and gain reduction, allowing for precise monitoring of the dynamic processing.
5. Mantenimiento
To ensure the longevity and optimal performance of your Behringer MDX1400, follow these maintenance guidelines:
- Limpieza: Utilice un paño suave y seco para limpiar el exterior de la unidad. Evite los limpiadores abrasivos o disolventes, ya que pueden dañar el acabado.
- Ventilación: Asegúrese de que haya suficiente ventilación alrededor de la unidad para evitar el sobrecalentamiento. No obstruya las aberturas de ventilación.
- Ambiente: Operate the unit in a dry environment, away from direct sunlight, heat sources, and excessive dust or moisture.
- Fuerza: Disconnect the power cord before cleaning or when the unit will be unused for extended periods.
- Servicio: Refer all servicing to qualified service personnel. Do not attempt to service the unit yourself.
6. Solución de problemas
If you encounter issues with your MDX1400, consult the following troubleshooting guide:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Cable de alimentación no conectado; toma de corriente defectuosa; fusible de la unidad quemado. | Check power cord connection; try a different outlet; contact service for fuse replacement. |
| Sin salida de audio | Incorrect cabling; input/output levels too low; gate threshold too high; compressor gain reduction too high. | Verify all audio connections; adjust input/output levels; lower gate threshold; reduce gain reduction or increase output gain. |
| Audio distorsionado | Input signal too hot; output level too high; incorrect operating level setting. | Reduce input signal level; lower output level; ensure operating level switch (+4 dBu / -10 dBV) matches connected equipment. |
| Ruido/zumbido excesivo | Ground loop; faulty cables; improper gain stagEn. | Check for ground loops (use a ground lift if necessary, but with caution); replace faulty cables; adjust gain staging throughout your system. |
7. Especificaciones
| Peso del artículo | 5 libras (2.27 kg) |
| Dimensiones del paquete | 23 x 10 x 5 pulgadas (58.4 x 25.4 x 12.7 cm) |
| Número de modelo | MDX1400 |
| Tipo de conector | XLR, conector de 1/4" |
| Formato de señal | Cosa análoga |
| Fuente de poder | Eléctrico con cable |
| Efectos de salida de audio | Compression, Limiting, Gating, Expansion, Enhancement |
| Tipo de controles | Perilla, interruptor |
| Nivel operativo | Conmutable +4 dBu / -10 dBV |
| Entradas/Salidas | Servo-balanced XLR and 1/4" TRS |
8. ¿Qué hay en la caja?
- Behringer MDX1400 Autocom Pro Compressor/Limiter Unit
- Cable de alimentación
9. Garantía y soporte
Para obtener información detallada sobre la garantía y soporte técnico, consulte el sitio web oficial de Behringer. webVisite el sitio web o contacte a su distribuidor local de Behringer. Conserve el recibo de compra como comprobante para cualquier reclamación de garantía.
Puede encontrar más información y recursos de apoyo visitando el sitio web Behringer Store on Amazon.
