Producto terminadoview
The Moen 104408 Commercial AC Adapter is designed to provide reliable power for Moen commercial faucet systems, specifically models 8306 and 8308. This multi-unit adapter delivers 7.5 Volts and 3.0 Amps, capable of powering up to 10 faucets simultaneously. It includes hardware for both wall and deck mounting, offering flexible installation options for various commercial and institutional environments.
Image: Moen 104408 Commercial AC Adapter. This image shows the compact design of the adapter unit.
Información de seguridad
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- Asegúrese de que la fuente de alimentación esté desconectada antes de cualquier instalación o mantenimiento.
- This adapter is designed for indoor use only.
- No exponga el adaptador a la humedad ni a temperaturas extremas.
- Use only with specified Moen commercial faucet models (8306, 8308).
- Do not attempt to open or repair the adapter. Refer to qualified service personnel.
Configuración e instalación
The Moen 104408 adapter can be mounted on a wall or deck. Choose a location that is dry, protected from physical damage, and allows for proper ventilation.
Herramientas necesarias:
- Perforar
- Destornillador
- Cinta métrica
- Lápiz
Pasos de instalación:
- Seleccione la ubicación de montaje: Identify a suitable location near the faucets to be powered, ensuring the power cord can reach an outlet and the low-voltage cables can reach the faucets.
- Marcar los orificios de montaje: Use the adapter's mounting hardware as a template to mark the drill points on the wall or deck surface.
- Perforar agujeros piloto: Taladre agujeros piloto en las ubicaciones marcadas.
- Adaptador seguro: Attach the adapter securely using the provided screws and mounting hardware.
- Connect Low-VoltagCables electrónicos: Conecte el bajo volumentage cables from the faucets to the adapter's output terminals. Ensure correct polarity if applicable (refer to faucet manual). The adapter can power up to 10 faucets.
- Conecte el cable de alimentación: Plug the adapter's power cord into a standard electrical outlet.
- Sistema de prueba: Verify that all connected faucets are functioning correctly.
Imagen: Example of commercial faucet installation in a laboratory setting. This image illustrates the type of environment where Moen commercial products are typically used.
Instrucciones de funcionamiento
The Moen 104408 AC Adapter operates automatically once connected to a power source and the faucets. It provides continuous low-voltage power to the connected Moen commercial faucets.
- Ensure the adapter is plugged into a functional electrical outlet.
- The adapter does not have an on/off switch; it is always active when plugged in.
- Faucets connected to the adapter will draw power as needed for their operation.
Mantenimiento
The Moen 104408 Commercial AC Adapter requires minimal maintenance. Regular inspection can help ensure its longevity and proper function.
- Limpieza: Wipe the exterior of the adapter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Inspección de cables: Periodically check the power cord and low-voltagRevise los cables para detectar cualquier signo de daño, desgaste o deshilachado. Reemplace los cables dañados inmediatamente.
- Ventilación: Ensure the adapter's ventilation openings are not obstructed to prevent overheating.
- Condiciones ambientales: Confirm the adapter remains in a dry environment, free from excessive dust or humidity.
Solución de problemas
If you experience issues with your Moen 104408 Commercial AC Adapter, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Faucets not receiving power. |
|
|
| El adaptador se siente caliente. |
|
|
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 104408 |
| Marca | Moen |
| Fabricante | Moen Incorporated |
| Vol de salidatage | 7.5 voltios |
| Ampanhelo | 3.0 Amps |
| Quétage | 22.5 vatios |
| Fuente de poder | Eléctrico con cable |
| Peso del artículo | 1.35 libras |
| Dimensiones (largo x ancho) | 4-3/4 inches x 3 inches (approximate) |
| Componentes incluidos | Multi-Unit Adapter, 7.5V, 3A, Wall/Deck Mounting Hardware |
| Características especiales | Secure Mounting Assembly, Powers up to 10 faucets |
| Compatibilidad | Moen Commercial Faucet Models 8306, 8308 |
Información de garantía
The Moen 104408 Commercial AC Adapter is backed by a Garantía limitada de por vida. This warranty covers defects in material and manufacturing workmanship under normal use. For full details regarding warranty coverage, limitations, and how to make a claim, please refer to the official Moen warranty documentation or contact Moen customer support.
Image: Shield icon with a checkmark, symbolizing product warranty and reliability.
Atención al cliente
Para asistencia técnica, repuestos o consultas sobre garantía, comuníquese con el servicio de atención al cliente de Moen:
- Websitio: Visita la página oficial de Moen webSitio para recursos de soporte e información de contacto.
- Teléfono: Consulte el embalaje de su producto o el de Moen. webSitio para obtener el número de teléfono de atención al cliente apropiado.
Cuando se comunique con el soporte, tenga a mano el número de modelo del producto (104408) y la fecha de compra.
Image: Headset icon, representing customer service and support availability.
