Presto EverSharp Electric Knife Sharpener (Model 08800) User Manual

Introducción

The Presto EverSharp Electric Knife Sharpener (Model 08800) provides an efficient and automatic method for sharpening most non-serrated kitchen and sport knives. This two-stage system is designed to precision grind a perfect sharpening angle and then fine hone and polish the edge, delivering professional results for home use.

Figura 1: Frente view of the Presto EverSharp Electric Knife Sharpener.

Medidas de seguridad importantes

Al utilizar aparatos eléctricos, siempre se deben seguir precauciones básicas de seguridad para reducir el riesgo de incendio, descarga eléctrica y lesiones a las personas, incluidas las siguientes:

• Read all instructions before using the sharpener.
• To protect against electrical hazards, do not immerse the sharpener in water or other liquids.
• Desconéctelo del tomacorriente cuando no esté en uso, antes de colocar o quitar piezas y antes de limpiarlo.
• Evite el contacto con piezas móviles.
• No opere ningún electrodoméstico con un cable o enchufe dañado, o después de que el electrodoméstico funcione mal o se haya caído o dañado de alguna manera. Devuelva el aparato al centro de servicio autorizado más cercano para su examen, reparación o ajuste eléctrico o mecánico.
• El uso de accesorios no recomendados o vendidos por el fabricante del aparato puede provocar incendios, descargas eléctricas o lesiones.
• No utilizar en exteriores.
• No deje que el cable cuelgue del borde de la mesa o mostrador, ni que toque superficies calientes.
• Este aparato está destinado únicamente para uso doméstico.
• Always ensure the sharpener is placed on a stable, flat surface before use. The non-slip base helps secure the unit during operation.

Configuración

1. Unpack the knife sharpener and place it on a clean, dry, and stable countertop.
2. Ensure the power switch is in the "OFF" (O) position.
3. Enchufe el cable de alimentación en un tomacorriente estándar de 120 voltios de CA.
4. Verify the non-slip suction cups on the base are securely attached to the countertop to prevent movement during sharpening.

Figura 2: Abajo view of the sharpener, highlighting the non-slip suction cups for stability.

Instrucciones de funcionamiento

The Presto EverSharp features a two-stage sharpening system. Stage 1 is for precision grinding, and Stage 2 is for fine honing and polishing. Always sharpen non-serrated knives. For serrated knives, refer to the specific instructions below.

Sharpening Non-Serrated Knives

1. Turn the sharpener ON by pressing the power switch to the "I" position. The sharpening wheels will begin to rotate.
2. Stage 1 - Coarse Sharpening: Inserte la hoja del cuchillo en la ranura izquierda de Stage 1 (marked '1'). Hold the knife with the blade perpendicular to the sharpener and pull it towards you with light, even pressure. The precision blade guides will automatically position the knife at the ideal sharpening angle.
3. Repeat this process 3-4 times for each side of the blade, alternating between the left and right slots of Stage 1. Ensure you pull the entire length of the blade through the slot, from heel to tip.
4. Stage 2 - Fine Honing: Mover a Stage 2 (marked '2'). Insert the knife blade into the left slot of Stage 2. Again, pull the knife towards you with very light pressure, allowing the Sapphirite wheels to fine hone and polish the edge.
5. Repeat this 3-4 times for each side of the blade, alternating between the left and right slots of Stage 2. Esto estage refines the edge for a razor-sharp finish.
6. After sharpening, turn the sharpener OFF (O) and carefully wipe the blade with a damp paño para eliminar las virutas de metal.

Figure 3: Demonstrating how to hold and guide a knife through the sharpening slot.

Figure 4: Close-up of the power switch, indicating ON/OFF positions.

Afilado de cuchillos serrados

This sharpener can be used for non-electric serrated knives that are only serrated on one side. For these knives, only use Stage 2 (fine honing) and only sharpen the non-serrated side of the blade. Do not attempt to sharpen the serrated edge.

1. Turn the sharpener ON.
2. Insert the non-serrated side of the blade into the appropriate slot of Stage 2 (marked '2').
3. Pull the knife towards you with light pressure, ensuring only the non-serrated edge makes contact with the sharpening wheel.
4. Repita 3-4 veces.
5. Turn the sharpener OFF and clean the blade.

Consejos útiles

• Always use light pressure. Excessive pressure can slow the motor and damage the blade.
• Maintain a consistent speed when pulling the knife through the slots.
• For very dull knives, you may need additional passes through Stage 1 before moving to Stage 2.
• Sparks may occur when sharpening high carbon steel knives; this is normal.

Mantenimiento y limpieza

Regular cleaning ensures optimal performance and longevity of your sharpener.

1. Always unplug the sharpener before cleaning.
2. Wipe the exterior of the sharpener with a damp paño. No sumerja la unidad en agua.
3. The sharpener is equipped with receptacles underneath to catch metal filings. To clean, remove the red plugs on the bottom of the unit and empty the filings. Replace the plugs securely after cleaning.
4. Do not attempt to lubricate the sharpening wheels or any other part of the sharpener.

Solución de problemas

• El sacapuntas no se enciende: Ensure the power cord is securely plugged into a working electrical outlet and the power switch is in the "I" (ON) position.
• El cuchillo no se afila eficazmente:
  • Ensure you are using light, consistent pressure. Too much pressure can hinder sharpening.
  • Verify you are pulling the knife through the correct slots for Stage 1 y Stage 2.
  • For very dull knives, more passes through Stage 1 may be required.
  • Ensure the knife is non-serrated, or if serrated, only the non-serrated side is being sharpened in Stage 2.
• Excessive sparks: While normal for high carbon steel, ensure you are not applying excessive downward pressure.

Presupuesto

Garantía y soporte

The Presto EverSharp Electric Knife Sharpener (Model 08800) comes with a 1-year limited warranty against defects. For warranty claims or product support, please refer to the contact information provided in your product packaging or visit the official Presto websitio.