1. Introducción
1.1. Producto terminadoview
The JIKONG Lithium battery intelligent protection board is a management system tailored for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge, over-temperature protection, coulomb meter, Bluetooth communication, GPS remote, and other functions. It is compatible with lithium iron phosphate, ternary lithium, and LTO battery types.
This protection board utilizes energy transfer active balancing technology with a maximum continuous balance current of 1A/2A, ensuring battery consistency, improving battery range, and delaying battery aging.
A mobile APP supporting Android and iOS operating systems is available. The APP connects via Bluetooth to monitor battery status, modify parameters, and control charge/discharge switches. The compact and feature-rich board is suitable for various applications including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power, and solar power stations.
1.2. Características funcionales
- Indicador LED de estado de Bluetooth
- Operación remota por Bluetooth de la aplicación
- Cálculo de la capacidad de la batería
- Vol de alta precisióntagadquisición electrónica (±3 mV)
- Adquisición de corriente de alta precisión
- Visualización de la pantalla de información de soporte
- Registro de tiempo preciso
- Support RS485/CAN (one of two)
- Función de calefacción de soporte
- Admite comunicación GPS
- Función de precarga de descarga
- Protección contra sobrecorriente de carga
- Sobrevoltaje de cargatagy protección
- Carga sobre la protección de temperatura
- Protección contra bajas temperaturas durante la carga
- Descarga de protección contra sobrecorriente
- Descarga subvol.tagy protección
- Protección contra sobretemperatura de descarga
- Protección contra cortocircuitos
1.3. Structural Block Diagram
2. Especificaciones
2.1. Main Parameters (200A Model)
| Parámetro | Valor | Unidad |
|---|---|---|
| Vol de suministrotage | 20-100 | V |
| Consumo de energía en funcionamiento | <800 | mW |
| Temperatura de funcionamiento | -30-70 | °C |
| Maximum number of collection strings | 24 | (S) |
| Maximum balancing current | 2 | A |
| Corriente máxima de carga | 200 | A |
| Corriente máxima de descarga | 200 | A |
| Maximum instantaneous current | 350 | A |
| Maximum internal loop resistance | 0.5 | mΩ |
| Protective plate size | 162*102*20.4 | mm |
| Finished weight | 430 | g |
2.2. Dimensiones del producto
The JIKONG JK-BxAxxS-15P/20P series protection board measures 162mm x 102mm x 20.4mm.
2.3. Interfaz sobreview
The BMS features a rich interface to support various communication and control needs. Key interfaces include CAN, RS485, Bluetooth (BT), NTC temperature sensor, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer. For detailed pin definitions and connector types (e.g., XH-15AW, XH-11AW, XH-4AW, A1254WF-3A, 1.25T-4PWT, A1254WT-6A, A1254WT-7A), please refer to the full user manual PDF.
3. Configuración
3.1. Instalación de la aplicación
To install the mobile APP, scan the QR code below. The Android version requires Android 7 or higher.
3.2. Activación del dispositivo
Before powering on the protection board, ensure the balance cable is properly connected, and the P- and B- terminals are correctly wired. Verify that the protection board is securely fixed to the battery pack. Incorrect connections or loose fixing can lead to abnormal operation or damage.
The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage debe ser 2 V más alto que el volumen de la batería.tage to activate the board after assembly. Alternatively, the board can be activated by pressing a button (if a display screen and button are connected) or via the display interface.
3.3. Método de instalación
Handle the packaging box and protection board gently. Avoid impacts or damage during unpacking. The JK-BxAxxS-15P/20P series protection board is suitable for 7-24 series lithium battery packs. Wiring methods vary depending on the number of cells.
4. Operación
4.1. Ecualización activa
The BMS uses active equalization to transfer energy from higher-voltagcélulas e para reducir el volumentagcélulas electrónicas, asegurando voltage balance with minimal energy loss. Before using, set basic battery parameters (cell count, capacity, trigger differential pressure, voltage/current calibration) in the JIKONG BMS APP. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C of battery capacity). The balancing function automatically activates when the voltage difference between any two strings exceeds the set value and deactivates when it falls below the set value. This function can be toggled ON/OFF in the APP.
4.2. GPS and Display Interface
The protection board includes reserved GPS and display interfaces. Users can connect an optional GPS module for battery location tracking and a dedicated display screen to view battery information, customizing according to their needs.
4.3. Función de calentamiento
The BMS supports an optional heating function to prevent battery performance degradation in low temperatures. It uses a resistance heater or heating film with a designed current of 4A. This function can be controlled via the BMS control page in the APP. For safety, it is recommended to series a normally closed temperature control switch (45°C to 65°C) in the heating circuit to prevent thermal runaway.
4.4. Funciones de protección
- Sobrevoltaje de cargatage Protection (COP): Standard feature. Users set single overcharge protection voltage and recovery voltage in the APP. If any battery string exceeds the set voltage during charging, the BMS stops charging. Charging resumes when all cell voltages caen por debajo del volumen de recuperacióntage.
- Descarga insuficientetage Protection (DUP): Standard feature. Users set undervoltage protección voltage, recovery voltage, and automatic shutdown voltage in the APP. If any battery string falls below the set undervoltagy voltage during discharge, the BMS stops discharging. Discharge resumes when all cell voltagse elevan por encima del volumen de recuperacióntage. The BMS automatically shuts down if any cell voltage cae por debajo del volumen de apagado automáticotage.
- Charge Overcurrent Protection (COC): Standard feature. Users set continuous charging current, overcurrent delay, and recovery time in the APP. If charging current exceeds the set value for the specified delay, charging stops. Charging resumes after the recovery time.
- Discharge Overcurrent Protection (DOC): Standard feature. Users set continuous discharge current, overcurrent delay, and recovery time in the APP. If discharge current exceeds the set value for the specified delay, discharging stops. Discharging resumes after the recovery time. Note: Maximum continuous discharge current should not exceed the nominal current (150A/200A).
- Protección contra sobretemperatura (OTP): Standard feature for both charge and discharge. Users set overtemperature protection and recovery temperatures in the APP. If battery temperature exceeds the set value, the BMS stops the respective operation (charging or discharging). Operation resumes when the temperature falls below the recovery value.
- Low Temperature Protection (LTP): Standard feature for charging. Users set low temperature protection and recovery temperatures in the APP. If battery temperature falls below the set value, charging stops. Charging resumes when the temperature rises above the recovery value. Heating function is recommended for extremely cold areas.
- Protección contra cortocircuitos (SCP): Standard feature. Users can set short circuit protection delay (us) and recovery time (S) in the APP. If a short circuit occurs, the BMS will protect the battery. For initial connection issues (e.g., charger peak current, load capacitance), increasing the delay can help prevent false triggers.
4.5. Discharge Precharge Function
The BMS includes a discharge precharge function with a default time of 5 seconds. This function can be enabled or disabled, and the precharge time adjusted, via the APP.
4.6. Interruptor de emergencia
The emergency switch function provides a 30-minute emergency operation window in case of issues like over-temperature, over-discharge, or over-charge. Activating it via the APP allows temporary charge/discharge operation, even if cell voltages reach automatic shutdown levels, to prevent critical situations like being stranded.
4.7. Sueño inteligente
The intelligent sleep function allows the BMS to enter a low-power state when idle (charging/discharging current less than 1A for 26 consecutive hours) to conserve battery energy. It can be reactivated by pressing a button or connecting a charger.
4.8. Función de comunicación
The BMS supports optional CAN/RS485 communication. Users can select the desired protocol and configure the address and communication parameters via the APP's BMS control page. Refer to the Jikong Protection Board communication protocol document for specific details.
5. Mantenimiento
Regularly inspect all wiring connections for tightness and signs of wear. Keep the BMS unit clean and free from dust and moisture. The BMS is designed with various self-protection features (overvoltage, overcurrent, overtemperature, etc.) to minimize the need for manual intervention. If a protection event occurs, the system will attempt to recover automatically once conditions return to normal. For persistent issues, refer to the troubleshooting section or contact support.
6. Solución de problemas
The JIKONG BMS is equipped with advanced protection features to automatically manage and recover from various abnormal conditions:
- sobrevoltajetage/Undervoltage: The BMS will stop charging/discharging and resume once cell voltages return to safe levels.
- Sobrecorriente: Charging or discharging will be halted if current exceeds limits for a set duration, resuming after a recovery period.
- Overtemperature/Low Temperature: Operations will pause if temperatures are outside safe ranges and resume when conditions normalize.
- Cortocircuito: The BMS provides immediate protection. If a short circuit is triggered upon initial connection, verify external wiring and consider adjusting the short circuit protection delay in the APP if necessary, as high inrush currents from chargers or loads can sometimes cause false triggers.
For detailed parameter settings and adjustments related to these protections, please refer to the 'Parameter Setting' section in the APP or the full user manual PDF.
7. Garantía y soporte
7.1. Compromiso de servicio
Alcance de la garantía: Within three years from the date of receipt, JIKONG provides global warranty services covering quality issues not caused by human factors (e.g., functional failures, component defects). Service includes free repair or replacement based on product evaluation.
After-Sales Process:
- Solicitud de cliente: Submit applications via official after-sales channels (email/online customer service) with order numbers, fault descriptions, and evidence (photos/videos).
- Devolución de bienes: Customer covers international logistics costs for sending the product back to China and provides tracking information.
- Requisitos de empaque: Ensure product accessories are complete and packaging is intact to prevent transit damage.
- Detection and Processing: After receiving, the quality department inspects and informs repair/replacement plan within 5-7 working days. Non-human damage is eligible for free repair/replacement, with the customer bearing return logistics costs.
- Return and Tracking: After passing inspection, the product is sent back via logistics with full tracking. Logistics cycle is typically 7-15 working days (may vary due to customs). Cross-border compliance requires customer cooperation with necessary customs declaration documents.
7.2. Soporte adicional
For detailed parameter settings, advanced configurations, and comprehensive troubleshooting guides, please refer to the complete user manual PDF available at: Manual del usuario de JIKONG BMS (PDF).
The JIKONG BMS APP provides an intuitive interface for monitoring and controlling your battery system. Ensure your APP is updated to the latest version for optimal performance.
