1. Introducción y másview
The KERUI O11 Smart Fingerprint Padlock offers a keyless, secure solution for various applications. This padlock utilizes advanced fingerprint recognition technology, allowing for quick and convenient unlocking. It is designed with durability and user-friendliness in mind, featuring a robust construction and a rechargeable battery.
Características principales:
- Desbloqueo de huella digital: Your finger is the key, eliminating the need for traditional keys, passwords, or smartphone apps.
- Construcción duradera: Made from zinc alloy, providing superior resistance against cutting, cracking, and prying attempts.
- Diseño a prueba de agua: Rated IP56, offering protection against dust and water splashes, suitable for various environments.
- Reconocimiento rápido: Features 0.2-second speed recognition with 360° arbitrary angle biometric recognition.
- Soporte multiusuario: Stores up to 10 unique fingerprints, allowing family and friends to share access.
- Batería recargable: Equipped with a built-in 3.7V lithium battery, rechargeable via a Type-C port.
- Tiempo de espera largo: Provides up to 12 months of standby time on a single full charge.
- Alerta de baja potencia: Notifies you when the battery is low, ensuring you can recharge before it runs out.
- Garantía de seguridad: The padlock remains locked even if the battery is completely depleted.
2. Setup: Fingerprint Registration
Before using your padlock, you must register at least two administrator fingerprints. The first two fingerprints registered will be designated as administrators. These administrator fingerprints are crucial for adding or deleting other user fingerprints and resetting the device.
Initial Fingerprint Registration (Administrator):
- Touch the fingerprint identification area for 10 segundos until the blue light is on.
- While the blue light is on, place your first finger on the sensor. The green light will turn on.
- Immediately after, place your second finger on the sensor. The green light will turn off, indicating that both administrator fingerprints have been successfully entered.
Important: The first time you use the padlock, you need to enter two different fingerprints consecutively. Ensure you enter your fingerprints from a 360-degree angle for better recognition.
Adding Additional User Fingerprints:
The padlock can store up to 10 fingerprints in total (including administrators).
- Unlock the padlock using an already registered administrator fingerprint.
- Press and hold the administrator finger on the sensor for 5 segundos until the blue light is on.
- Press a new finger (the one you wish to add) on the sensor more than 10 times, ensuring the green light is on after each successful scan.
- Once the green light remains on, the new fingerprint has been successfully added.
3. Instrucciones de funcionamiento
Desbloqueo del candado:
Simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.2 seconds if the fingerprint is recognized.
Charging the Padlock:
The padlock is equipped with a built-in 3.7V lithium battery and charges via a Type-C USB port.
- Connect a Type-C charging cable to the padlock's charging port.
- A red light will illuminate, indicating that the padlock is charging.
- The padlock can be unlocked normally even while it is charging.
- The light will turn off once the battery is fully charged.
Recordatorio de batería baja:
Cuando el volumen de la bateríatage is equal to or lower than 3.5V, the red indicator light will flash for 15 seconds after an unlock attempt. If the padlock remains at a low voltage, it will alarm once every hour to remind you to charge it.
4. Mantenimiento
- Carga inicial: Fully charge the padlock for at least 3 hours before its first use.
- Carga regular: Recharge the padlock when the low battery indicator appears.
- Limpieza del sensor: Ensure the fingerprint sensor and your fingers are clean and dry for optimal recognition performance. Avoid using harsh chemicals or abrasive materials on the sensor.
- Almacenamiento: Store the padlock in a dry environment within the specified working temperature range.
5. Solución de problemas
Q: Why can any fingerprint unlock the padlock?
A: Before any fingerprints are registered, the padlock is in an open state, allowing any finger to unlock it. Once at least one fingerprint is registered, only registered fingerprints will be able to unlock the device. It is recommended to register at least two administrator fingerprints immediately after purchase to secure the device.
Q: My fingerprint is not being recognized. What should I do?
A: Fingerprint recognition issues can occur due to various factors such as finger wear, peeling skin, scratches, dirt, moisture on fingers, or smudges on the fingerprint sensor. Ensure both your finger and the sensor are clean and dry. If you experience frequent issues, consider registering additional fingerprints (at least 3) to account for potential changes to your primary fingerprint.
Q: What if the battery dies completely?
A: If the battery is completely depleted, the padlock will remain in its last locked state. To unlock it, connect a Type-C charging cable to the padlock. The red light will indicate charging, and you will be able to unlock it normally even while it is connected to power.
Q: How do I delete all registered fingerprints (factory reset)?
A: To restore the padlock to factory settings and delete all fingerprints:
- Desbloquee el candado usando una huella digital de administrador.
- Press and hold an administrator finger on the sensor for 20 segundos.
- Suelte el dedo cuando la luz roja esté encendida.
- Press the same administrator finger again when the red light is on. All fingerprints will be removed after the light changes to green.
6. Especificaciones
| Característica | Detalle |
|---|---|
| Modelo | O11 |
| Método de desbloqueo | Huella dactilar |
| Capacidad de huellas dactilares | 10 groups (including 2 administrators) |
| Tipo de carga | Tipo-C USB |
| Tiempo de espera | Hasta 12 meses por carga completa |
| Material | Aleación de zinc |
| Dimensiones | 76 mm (alto) x 46 mm (ancho) x 13 mm (profundidad) |
| Clasificación IP | IP56 |
| Temperatura de trabajo | -10°C a +40°C |
| Lector de huellas dactilares | 96*96 sensor |
| Tasa de falso rechazo (FRR) | <1% |
| Tasa de aceptación falsa (FAR) | <0.002% |
| Vol de trabajotage | 3.0-4.2 V |
| Peso | 90 gramos |
| Fingerprint Sensor Coverage | 72*64MM |
| Velocidad de desbloqueo | En 0.2 segundos |
| Indicador LED | Three colors: Red / Blue / Green |
| Batería | Built-in 3.7V Lithium Battery |
7. Consejos para el usuario
- Registrar múltiples huellas dactilares: To ensure continuous access, especially if a primary finger gets scratched or damaged, register at least 2-3 different fingerprints.
- La limpieza es clave: Always ensure both your finger and the fingerprint sensor are clean and dry before attempting to unlock. Residue or moisture can hinder recognition.
- Vary Fingerprint Angles: When registering new fingerprints, try touching the sensor from slightly different angles. This helps the padlock learn a more comprehensive scan of your fingerprint, improving recognition accuracy during daily use.
- Cargar con prontitud: Pay attention to the low battery reminder. Charging the padlock before it completely drains ensures uninterrupted security.
- Carga completa inicial: For optimal battery performance and longevity, fully charge the padlock for at least 3 hours before its very first use.
8. Garantía y soporte
KERUI provides professional service for its products. If your fingerprint padlock has any manufacturing defect within one month of receiving the goods, you are eligible for a free replacement.
For any questions or assistance, please contact customer support. We are committed to resolving your inquiries and typically respond within 24 hours.
