EQi V5 Bluetooth Module Owner’s Manual

EQi V5 Bluetooth Module

Product Overview

The EQi_V5 Bluetooth Module is a high-performance dual-mode Bluetooth module specifically designed for IoT devices and smart home applications. Integrating the latest Bluetooth 5.4 technology, it delivers stable wireless connectivity with high-speed data transfer and low-latency communication, meeting diverse application requirements.

Product Specifications

1. Bluetooth version: Support Bluetooth 5.4 standard, compatible with Bluetooth 4.2/4.0/3.0/2.1+EDR and other old versions.
2. Communication distance: In an unobstructed environment, the maximum communication distance can reach more than 30 meters (depending on the specific environment).
3. Power management: No low power mode is available.
4. Compatibility: It is widely compatible with mainstream operating systems and devices on the market, such as iOS and Android.
5. Interface type: Provide UART communication interface, support FTMS protocol, serial port rate: 9600
6. Antenna design: Built-in PCB antenna.
7. Operating temperature: -0°C to +85°C, to meet the requirements of harsh environment.

Functional characteristics

outline dimension ：

Interface definition:

FCC Statement

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The module in this product is labeled with its own FCC ID. The FCC ID is not visible when the module is installed inside another device. Therefore, the outside of the device into which the module is installed must also display a label referring to the module. The final end device must be labeled in a visible area with the following
“Contains FCC ID: 2A4NH-EQIV5”

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:

• This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

FAQ