EPSON Wireless Transmitter Settings User Guide

Wireless Transmitter Settings

Specifications

  • Software Name: Epson Wireless Transmitter Settings
  • Version: 1.02
  • Release Date: 2024/12/10
  • Supported OS:
    • macOS 12.x(64bit)
    • macOS 13.x(64bit)
    • macOS 14.x(64bit)
    • macOS 15.x(64bit)
  • File Size: 1.65 MB

Product Overview

The Epson Wireless Transmitter Settings software enables users
to pair the transmitter with the receiver, such as a base unit or
supported projector. Additionally, it allows users to update
firmware for the transmitter and control the connection bandwidth
of data during transfer to the receiver.

Software Features

  • Pairing between transmitter and receiver
  • Firmware updates for the transmitter
  • Control of connection bandwidth during data transfer

Software Usage Instructions

Pairing Transmitter and Receiver

  1. Launch the Epson Wireless Transmitter Settings software on your
    macOS device.
  2. Follow the on-screen instructions to initiate the pairing
    process between the transmitter and the receiver.
  3. Ensure that both devices are within range and powered on.
  4. Complete the pairing process as guided by the software.

Updating Firmware

  1. Open the Epson Wireless Transmitter Settings software.
  2. Check for firmware updates within the software interface.
  3. If an update is available, follow the prompts to download and
    install the latest firmware version for the transmitter.

Controlling Connection Bandwidth

  1. In the software settings, locate the option to control
    connection bandwidth during data transfer.
  2. Adjust the settings according to your preferences or
    requirements for data transfer speed.
  3. Save the changes to apply the new connection bandwidth
    settings.

Notes

When pairing with the receiver on macOS 14 or later, please
allow the Location Services and Epson Wireless Transmitter Settings
functions.

Software Release History

Version Release Date Update Contents
1.02 2024/12/10 Support macOS 15. Revised the end-user license agreement
(EULA).
1.01 2023/11/6
1.00 2021/4/6

FAQs

Q: Can I use the Epson Wireless Transmitter Settings software
on Windows operating systems?

A: No, the software is only supported on macOS systems as listed
in the specifications.

Q: How can I troubleshoot connection issues between the
transmitter and receiver?

A: If you encounter connection problems, ensure that both
devices are within range, powered on, and follow the pairing
instructions carefully. You can also check for any firmware updates
that might address connectivity issues.

“`

Epson Wireless Transmitter Settings

Software Overview

Software Name Ver Release Date Supported OS
File size

Epson Wireless Transmitter Settings
1.02
2024/12/10 macOS 12.x(64bit) macOS 13.x(64bit) macOS 14.x(64bit) macOS 15.x(64bit)
1.65 MB

Epson Wireless Transmitter Settings Features
The Epson Wireless Transmitter Settings software allows you to perform pairing between the transmitter and the receiver such as a base unit or a supported projector, and update firmware for the transmitter. You can also control the connection bandwidth of data when transferring to the receiver.

Notes
When pairing with the receiver on macOS 14 or later, please allow the “Location Services” and “Epson Wireless Transmitter Settings” functions.

Software Release History

Ver 1.02 1.01 1.00

Release Date 2024/12/10 2023/11/6 2021/4/6

Update Contents Support macOS 15. Revised the end-user license agreement (EULA).

EPSON is a registered trademark of Seiko Epson Corporation. macOS is a trademark of Apple Inc. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. ©2021-2024 Seiko Epson Corporation All rights reserved.

Documents / Resources

EPSON Wireless Transmitter Settings [pdf] User Guide
Wireless Transmitter Settings, Transmitter Settings, Settings

References

Leave a comment

Your email address will not be published. Required fields are marked *