Categories: EPOMAKER

EPOMAKER Skyline 87 TKL Hot-Swap Wired-Wireless Mechanical Keyboard Kit User Guide

EPOMAKER Skyline 87 TKL Hot-Swap Wired-Wireless Mechanical Keyboard Kit User Guide

This Quick Guide is an introduction to the use and functionality of the EPOMAKER SKYLINE 87.
For in-depth guide of functionality of the customization software please refer to the manual that you can find in the official epomaker website at https://epomaker.com/pages/software-downloads

Should you require more assistance please email us at support@epomaker.com

SHORTCUTS

FN + F1 Screen brightness –
FN + F2 Screen brightness +
FN + F3 Task switching (WIN+Tab)
FN + F4 Quick Access
FN + F5 Email
FN + F6 My Computer
FN + F7 Last song
FN + F8 Pause/Play
FN + F9 Next Song
FN + F10 Mute
FN + F11 VOL –
FN + F12 VOL +
FN+ ESC Restore the default setting
FN+ WIN Lock Windows
FN+ ENTER Battery Status

CONNECTION

FN + 1 Bluetooth Device 1
Short press to switch, long press 3S to enter Bluetooth device 1

FN + 2 Bluetooth Device 2
Short press to switch, long press 3S to enter Bluetooth device 2

FN + 3 Bluetooth Device 3
Short press to switch, long press 3S to enter Bluetooth device 3 Bluetooth Device 3

FN + 4 Wireless 2.4G
Long press 3S to enter 2. 4G mode

FN + 4 USB-C
Short press to switch to wired connection

BACKLIGHT SETTINGS

FN + ↑ RGB Brightness +
FN + ↓ RGB Brightness –
FN + ← RGB Speed –
FN + → RGB Speed +
FN + INSERT Toggle the backlight mode
FN + HOME Toggle the backlight color
FN + PG UP Toggle backlight direction
FN + BACKSPACE Turn on/off the RGB

CHANGE RGB EFFECTS

Pressing Fn+Insert at the same time allows you to switch the RGB effect of your Skyline 87 keyboard kit.

PAIRING BLUETOOTH

Long press the FN+1/2/3 for 3S, the keyboard will start pairing, the light will flash and stay on 2S.
If there’s no connection, the keyboard will enter sleep mode.

PAIRING WIRELESS 2.4GHz

Firstly, turn on the keyboard, press FN+4 to enter 2.4G mode, then press FN+4 key combination 3S to enter pairing mode, plug the receiver into your device, and you will see the light flashes, then exit pairing after successful recognized, the mode LED is always on for 2S, after the 30S, exit pairing mode, the light goes off, and the keyboard goes to sleep

RECONNECTION INSTRUCTION

When the keyboard is turned on or wakes from sleep mode, only the current device will be reconnected; if the reconnection is unsuccessful, it will go to sleep, and will continue to reconnect after the key is woken up.

The indicator light flashes slowly when reconnecting with Bluetooth, and is always on for 2S after connection. If you press the button during reconnection, the reconnection time will become longer. Counting within 10S after releasing the button, if the pairing is successful, the keyboard will enter pairing mode. If the reconnection fails, the light will go off and the keyboard will enter sleep mode, but the data of the last successful pairing will be retained.

PRODUCT SPECIFICATIONS

NUMBER OF KEYS 87 KEYS
HOT-SWAP YES
BACKLIGHT RGB BACKLIGHT
CONNECTION BLUETOOTH 5.0/2.4GHZ/TYPE-C WIRED
COMPATIBILITY WINDOWS/MAC
BATTERY 3000mAh
PRODUCT WEIGHT 1000G±20G
PRODUCT DIMENSIONS 328*148*42.3 mm

REPLACING KEYCAPS AND SWITCHES


For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches

Before installing switches, be sure the pins are clean and straight.

Push Straight Down

Please be gentle. Be sure the pins are aligned with the slots.

Install Switches

  1. Check that all the switch metallic pins are perfectly straight and clean.
  2. Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
  3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
  4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Remove Switches

  1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
  2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
  3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.

Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

Included Tools

Switch Puller

Keycap Puller

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.

We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help

COMMUNITY FORUMS

Join our community and learn together with other keyboard enthusiasts.

https://discord.gg/2q3Z7C2

https://www.reddit.com/user/epomaker/

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.

We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.

We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.


Manufacturer:
Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com

APEX CE SPECIALISTS LIMITED


Address:
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND
Contact: Wells
Tel: +353212066339
Email: info@apex-ce.com

Documents / Resources

EPOMAKER Skyline 87 TKL Hot-Swap Wired-Wireless Mechanical Keyboard Kit [pdf] User Guide
Skyline 87 TKL Hot-Swap Wired-Wireless Mechanical Keyboard Kit, Skyline 87, TKL Hot-Swap Wired-Wireless Mechanical Keyboard Kit

References

Recent Posts

SAMSUNG Galaxy Watch 5 Bluetooth Smartwatch Instruction Guide

SAMSUNG Galaxy Watch 5 Bluetooth Smartwatch

2 seconds ago

Whirlpool WCI55US0JB 30 Inch Built-In Electric Induction Cooktop Instruction Manual

WCI55US0JB 30 Inch Built-In Electric Induction Cooktop 24" (65 CM), 30" (78.2 CM) AND 36"…

2 mins ago

EMX ULT-MVP-2 Multi Voltage Vehicle Loop Detector Instruction Manual

ULT-MVP-2 Multi Voltage Vehicle Loop Detector ULT-MVP-2TM Multi-Voltage Vehicle Loop Detector Two Channel with Direction…

11 mins ago

Fujifilm FinePix AX200 12 MP Digital Camera User Guide

Fujifilm FinePix AX200 12 MP Digital Camera

11 mins ago

SENSECAP Connect M2 Multi-Platform Gateway to AWS IoT User Guide

Connect M2 Multi-Platform Gateway to AWS IoT SenseCAP Connect M2 Multi-Platform Gateway to AWS IoT…

14 mins ago

beko HMM 62404 W Hand Mixer User Manual

HMM 62404 W Hand Mixer Hand Mixer User Manual HMM 62404 W EN / DE…

15 mins ago