C75 Wired Magnetic Keyboard
C75
FN+:
FN+:
FN+:
FN+:
FN+|:
FN+ -_:
FN+=+ :
FN+Backspace : /
FN+PG UPLOGO
FN+PG DN: LOGO
FN+Space: FN+Space
FN+A: Windows
FN+S: Mac
FN+F1:
FN+F2:
FN+F3:
FN+F4:
FN+F5:
FN+F6:
FN+F7:
FN+F8:
FN+F9:
FN+F10:
FN+F11:
FN+F12:
FN+WIN : WIN
FN+DEL: INSERT
FN+HOME:END
CIDOO C75 CIDOO WWW.CIDOOO.COM C75
12.0mm2.0mm
22.0mm 2 1)2.0mm2.0mm
2)2.0mm 3)2.0mm4.0mm0.5mm
0.5mm 3
1
12.0mm2.0mm
24.0mm 32.0mm
4.0mm2.0mm 0.1mm0.1mm
75% Wired Magnetic Keyboard
minimalistic design inheriting the originality style THIS IS EXACTLY WHAT I LIKE THANK YOU
Thank you for purchasing CIDOO C75 Magnetic Keyboard , We hope you will be pleased with both the product and service you received . The following is a detailed introduction of the functions and operation method of this product.
Default Hot Keys Hold FN+ listed keys to activate FN+: LED backlight brightness Increase FN+: LED backlight brightness decrease FN+: LED backlight direction FN+:LED backlight color FN+|: Toggle LED backlighting mode FN+-_:: LED backlight speed decrease FN+=+: LED backlight speed increase FN+BACK SPACE: LED toggle ON/OFF FN+ PG UP : Toggle light strip LED mode FN+ PG DN: Toggle light strip LED color FN+ Space: Hold FN + SPACE for 3 seconds to reset the keyboard to the factory setting
Multimedia keys FN+A: Windows System FN+S: Mac System FN+F1: Music Player FN+F2: Volume FN+F3: Volume + FN+F4: Mute FN+F5: Previous FN+F6: PlayPause FN+F7: Next
FN+F8: Stop/Play FN+F9: Email FN+F10: Web FN+F11: Calculator FN+F12: Search FN+ DELETE: INSERT FN+ PAGE UP: HOME FN+ PAGE DN: END FN+WIN : Lock Unlock Winkey FN+DEL: INSERT FN+HOME:END
The upper left knob switch rotates clockwise to increase volume, counterclockwise to decrease volume, and presses down to mute SOFTWARE CONFIGURATION
CIDOO C75 driver can be used to configure the backlight ,key travel settings and rapid trigger settings . Please download the software from CIDOO website WWW.CIDOOO.COM and install it to your PC .
1.Normal Trigger Mode.
æAs set in the above figure ,the actual point is at (2.0mm). when a key is pressed down past 2.0mm, itis considered to be in the pressed state (key activation) çWhen the key is released to a point above ,2.0mm from the actuation point, it is considered to be in the released state. 2aRapid Trigger Mode.
æ.As set in the above figure ,the actuation point is at (2.0mm). When a key is pressed down past 2.0mm . It is considered to be in the pressed state. The rapid trigger feature is activated.
ç.When the key is released to a point above 2.0mm from the actuation point, itis considered to be in the released state. The rapid trigger is deactivated.
è.When the key is between 2.0mm to 4.0mm,a press down of 0.5mm is considered a pressed state, and a release of 0.5mm is considered a released state .
3. Rapid Trigger Mode (Separate settings for press and release travel )
æAs set in the above figure ,the actuation point is at (2.0mm).When the key is pressed down past 2.0mm,the rapid trigger function is activated. çWhen the key is released to the end point above 4.0mm, it enters a released state, and the rapid trigger function is deactivated. èWhen the key is pressed down past 2.0mm,the rapid trigger function is activated. since the end point is set 4.0mm, the rapid trigger function will be effective throughout the entire travel as long as the key is pressed past 2.0mm. A key press of 0.1 mm is considered a pressed state and a key release of 0.1 mm is considered a released state.
CIDOO C75
Documents / Resources
 |
Epomaker C75 Wired Magnetic Keyboard [pdf] Instruction Manual C75, C75 Wired Magnetic Keyboard, C75, Wired Magnetic Keyboard, Magnetic Keyboard, Keyboard |
