EPI NA-C86 Backlit Keyboard Case User Guide

Standard Bluetooth interface, operating distance: 10 m
Modulation system: GFSK
Operating voltage: 3 – 4.2 V
Operating current: ≤85-120mA (the keyboard is in operation)
Standby power: ≤1mA
Sleep mode power: 40uA
Standby time: up to 180 days
Charging time: 2-3 hours
Lithium battery capacity: 500 mAh
Lithium battery life: 2 years
Operating time (without interruption): with backlight 5 h without backlight up to 55 h
Buttons strength: 80 ± 10 g
Buttons life: 3 million keystrokes
Operating temperature: -10 °C – ± 55 °C
Material: PC, synthetic leather, ABS
Dimensions: 189 × 252 × 12 mm
Weight: 590 g

Case

Magnetic strip
Charging port

On / off button
Caps Lock LED indicator

Pairing LED indicator
Charging LED indicator

Touchpad

Package content

1x KEYBOARD CASE
1x instruction manual
1x USB-C cable 0.8 m long

Inserting tablet

Open the case and insert the iPad into the tablet compartment.

Bluetooth connection procedure

When the switch is set to the „ON“ position, the indicator light comes on for 3 seconds. Press the FN + C buttons and the keyboard will switch to pairing mode.

Turn on and unlock your tablet and click on the „Settings“ icon.
In the Settings menu, click the Bluetooth menu.

Turn on Bluetooth on the keyboard and the tablet will automatically search for available Bluetooth devices.
Select the „Bluetooth Keyboard“ from the list and click on it. Depending on the system, enter the pairing password „****“ and press the Enter button to confirm and connect automatically.
Note: Some models may not require a pairing password.

When the Bluetooth connection is completed successfully, the indicator light turns off and “Connected” appears in the list of searched Bluetooth devices.

Light indicators

Bluetooth connection indicator light: Press the FN + C buttons and the keyboard will switch to pairing mode.
CapsLock indicator light: Press the CapsLock key when you need to type in uppercase. The indicator light comes on.
Charge level indicator:
Press the battery charge level key to activate the LED.
0–25% – LED gives one red flash.
25–50% – LED gives two red flashes.
50–75% – LED gives three red flashes.
75–100% – LED gives four red flashes.
Battery near empty – LED flashes slowly in red.
Charging – LED glows red.
Fully charged – LED glows green.

Charging port
On / Off button

Keyboard shortcuts

	Home page	Brightness –		Brightness +
	On-screen keyboard	Search		Keyboard switching
	Pause playback / Start playback	Next tune		Previous tune
	Press repeatedly to change backlight brightness	Insert		Lock screen
	Volume –	Volume +		Mute
	Activate battery charge level LED	Enable / disable touchpad	Fn+c	Bluetooth pairing
Fn	Function button	Hold backlight icon and press PgUp / PgDn to cycle backlight colors.

iOS gestures

	Drag your finger – move the cursor		One-finger click – left mouse button click
	Tap, tap and hold, then drag – left-click on a selected item and drag		Press and hold, one finger – click and hold.
	Press trackpad or other keyboard – wake iPad.		Swipe two fingers right while on desktop or lock screen – open today‘s activity.
	Swipe one finger below display bottom edge – open Dock.		Swipe two fingers down – open search from desktop.
	Swipe one figer below display bottom edge; after Dock appears, swipe finger again below display bottom edge – return to desktop.		Tap two fingers to bring up quick action menu for items such as desktop icons, email messages or the Camera button in Control Center – secondary click.
	Swipe two fingers up or down – scroll up or down.		Swipe one finger to top right to select top right status icons; tap to open Control Center.
	Swipe two fingers left or right – scroll left or right.		Swipe one finger to top left to select top left status icons; tap to open Notification Center.
	Swipe two fingers toward or away from each other – zoom out / zoom in.		Press and hold three fingers – screen capture.
	Swipe three fingers up – return to desktop.		Swipe three fingers up, pause briefly, then lift fingers – open app switcher.

Charging

The keyboard is equipped with a built-in lithium battery, which must be recharged regularly.
Charge the keyboard fully before using it for the first time.

To extend the life of the keyboard, charge it only when the power light is flashing. The recommended charging time is 2-3 hours.
Insert the end of the USB cable into the charging port on the keyboard.

Insert the other end of the USB cable into the USB-C-port on your computer or network adapter.
The power light will be on during charging. When it goes out, the keyboard is charged.

Note:

If you do not use the keyboard for more than 15 minutes, it automatically goes into sleep mode. All LED indicators turn off. Press any key, wait about 3 seconds and the keyboard will activate.

If you will not be using the keyboard for an extended period of time, we recommend that you turn it off to extend its life.

Cleaning

Keep the keyboard and the case clean. This is the only way you can achieve a reliable and long product life.
To clean the keyboard, use only products designed for cleaning and maintenance of this type of electronics and accessories.
Warning:
Never wash the keyboard or case in water or any other liquid. Do not use harsh cleaners, gasoline, solvents, chemicals, etc. for cleaning.

Troubleshooting

rroblem	Solution
The LED indicator did not light up when the keyboard as turned on.	The keyboard battery is empty. Charge it according to the instructions in the °Charging” section.
The smartphone or tablet did not find the keyboard.	Make sure you have pressed the “Connect” button. You should see a flashing blue LED. If the LED indicator is not flashing, the keyboard will not be visible to your device.
P’airing failed. The keyboard is in the list of searched available wireless devices.	Turn off the keyboard and delete it from the search list on your phone or tablet. Then start the search again and perform a new pairing.
Ifyou do not use the keyboard for a long time, you have o enter password for pairing.	Turn of both the keyboard and device and turn them on again after a while. Then try again pairing the device with the keyboard.
The keys do not work after pairing.	Check the input setting of the tablet. Make sure that all the settings are ON. If not, change the setting.

Safety instructions

Use the keyboard only as instructed in this manual.
Keep out of reach of children.
Do not place any heavy objects on the keyboard.
Do not disassemble the keyboard. It does not contain any parts repairable by the user. Have all repairs carried out by an authorized service center. Never use the keyboard if it is damaged in any way.
Protect the keyboard from moisture, dust, falls, and shocks.
Do not expose the keyboard to dripping or splashing water. Do not immerse the keyboard in water or any other liquid. Do not put containers filled with water on the keyboard, e.g. vases.
Do not place the keyboard near an open flame, such as candles, heaters, or other heat sources.
If you notice unusual keyboard overheating or other signs of malfunction, stop using it and contact an authorized service center.
Keep the product clean. Use only cleaning agents that are intended for cleaning and maintenance of this type of electronics and accessories.
Do not insert any objects into the keyboard inputs.
Do not force the USB-C cable connector into the keyboard input.
Keep the product in a dry, well-ventilated place out of the reach of children or pets.
Dispose of the lithium battery in an environmentally friendly manner. Contact your vendor or local government. Follow the applicable legal regulations.
The language of the original version is Czech.

Disclaimer

Use this product only in accordance with the instructions in this manual. The manufacturer accepts no liability for any damage caused by incorrect use of this product.

This symbol on the product or in the accompanying documentation indicates that the product must not be considered a regular municipal waste and must be disposed of in accordance with local regulations. Pass thi product for environmentally safe disposal. Proper disposal of this product protects the environment. For more information, contact your local municipal waste disposal office, the nearest collection point or your dealer.
This product complies with all the essential requirements of the EU directives that apply to it.