QCY ArcBuds Lite True Wireless Earbuds

Overview

Choose Your Eartips

Please try medium eartips first as they fit most people.

Illustration showing the QCY ArcBuds Lite earbuds and charging case. Components labeled include: Touch panel, LED, Pogo pins, Mic, Eartip, Charging case, Type-C cable, and Eartips. A QR code is also displayed with the text 'For better using experience, please scan to download QCY APP before start-up.' The illustration notes that 'Above pictures are for reference only yet practical accessories may vary.'

How to Connect

First Time Connection

1. Pick up both earbuds, pop both earbuds into the case to activate them.
2. Pick up both earbuds again.
3. On cellphone, search QCY ArcBuds Lite and tap to connect.

Note: Earbuds will auto power on when picked up; otherwise, please charge and try again.

Switch Connected Device

1. Turn off phone A's Bluetooth and the earbuds will auto disconnect and become connectable.
2. On phone B, search QCY ArcBuds Lite and tap to connect.

Note: Multi-point connection is not available. Earbuds will auto reconnect to phone B upon powering up again.

Factory Setting

Delete Connectivity Records

(Try the following steps if earbuds fail to be connected)

Push earbuds into the case, touch both panels 5 times or until LEDs blink white 5 times to reset them to factory settings.

Note: Refer to 'How to Connect' after Factory Setting.

How to Wear

1. Please put on earbuds properly then adjust them to fit yourself.
2. Keep the microphone towards your mouth.

Note: Wearing them incorrectly may cause a bad calling or listening experience.

LED on Earbud

The LED will glow solid red when the earbud is charged and turn white for 30 seconds after topping up.

LED on Charging Case

The LED will blink white when the case is charging and turn solid white after topping up.

Pushing earbuds into the case: LED will turn white for 4 seconds or blink white for 4 seconds if the case has low battery.

Functions

Earbud Components: Touch panel, Mic, LED, Pogo pins, Eartip.

• Power-on: Pick up earbuds / Keep touching panel for 1.5s
• Power-off: Push earbud back into the case.
• Answer/End Call: Double touch panel.
• Ignore Call: Keep touching panel for 1.5s.
• Skip Track Backward: Keep touching the left panel for 1.5s.
• Skip Track Forward: Keep touching the right panel for 1.5s.
• Voice Assistant: Triple touch the left panel.
• Playback/Pause: Double touch panel.
• Gaming Mode: Triple touch the right panel.

Warranty Card

Warranty Period

12 months after purchase (or inquire your local shopper for more details).

Free Service

If defects caused by quality issues occur within the warranty period, present this card and purchase receipts to your distributor for free exchange service.

User Information:

• Model Number:
• Date of Purchasing:
• User's Name:
• User's Phone:
• User's Address:
• Shop's Name:
• Shop's Address:
• Comments:

Conditions for Voiding Free Exchange Service:

• Damages caused by unauthorized disassembly.
• Defects or physical damages caused by leaking or dropping off.
• Damages by act of God.

For damages or defects not covered by the above circumstances, please return to the distributor for free repairing.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Tips

1. Before using the earbuds, please read the manual carefully and keep it for future references.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds are left unused for over two weeks, please recharge.
4. Please use chargers made by a qualified manufacturer.
5. If earbuds fail to be found by phone, please return them to connectable mode or restore factory settings. If a program error occurs on the phone, please turn off and on the Bluetooth function or reboot the phone.

Caveats

1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
2. Do not store the earbuds in extreme temperatures (below 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing the risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the earbuds.
6. Note: Please do not use earbuds for a long time as it may damage your hearing.
7. Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.