Drainage Instructions

Drainage Ports

Your dehumidifier is equipped with two drainage ports:

• Middle drainage port: This port is used during dehumidification mode. To use it, remove the plug and connect a drain hose. An exhaust hose is not required for this mode.
• Bottom drainage port: This port is used when the water tank becomes full.

Water Drain Plug Instructions

Follow these steps to drain the unit using the bottom drain plug:

1. Stop the unit when the control panel displays "P1" or the [water-full indicator symbol]. Avoid moving the air conditioner while it is draining.
2. Locate the drain plug at the rear drainage port.
3. Remove the drain plug to allow condensate water to flow out automatically.
   • If the drain pan fills up during the drainage process, temporarily reinsert the plug to pause the draining.
   • Empty the drain pan and repeat the process until the tank is completely drained.
4. After draining, securely reinsert the drain plug to prevent any leakage. Ensure that no water continues to flow into the drain pan.

Diagram Description: The illustration depicts the rear of a dehumidifier unit. A flexible hose is attached to the bottom drain port, with an arrow indicating the direction of water flow away from the unit. The drain plug is visible near the hose connection point.