DieHard 41-6646 3,400-Lumen Rechargeable Flashlight with Power Bank User Manual

Enkonduko

This manual provides instructions for the DieHard 41-6646 3,400-Lumen Water-Resistant Aluminum COB LED Rechargeable Flashlight with Power Bank. Please read this manual thoroughly before operating the device to ensure proper use and maintenance. Retain this manual for future reference.

Produkto Finisview

Ŝlosilaj Trajtoj

• Lumigaj Reĝimoj: 3,400 lumens (flood + spotlight), 1,500 lumens (flood), 2,000 lumens (spotlight high), and 600 lumens (spotlight low).
• Beam Distanco: Ranges between 229 feet and 853 feet, depending on the mode.
• Fortikeco: Constructed from heavy-duty, military-grade aluminum.
• Akvorezisto: IPX4 rated, providing protection against splashing water from any direction.
• Efiko-rezisto: Drop tested to 3.2 feet.
• Funkcio de Power Bank: Integrated power bank for charging external devices.

Komponentoj

Familiarize yourself with the main components of your DieHard flashlight:

Figuro 1: Entute view of the DieHard 41-6646 flashlight, showcasing its black aluminum body and blue accents.

• Flashlight Head: Contains the COB LED for illumination.
• Korpo: Aluminio casing housing the battery and internal electronics.
• Power Butono: Located at the tail cap for turning the flashlight on/off and cycling through modes.
• Ŝarga Haveno: A USB port located under a protective collar for recharging the flashlight and for power bank functionality.

Figure 2: Close-up of the flashlight head, highlighting the COB LED light source.

Figure 3: The tail cap of the flashlight, featuring the integrated power button.

Agordi

Ŝargante la Lanternon

Before first use, fully charge the flashlight. The device includes a Lithium Ion battery.

1. Locate the blue collar on the flashlight body. Twist or slide this collar to reveal the USB charging port.


Figure 4: The USB charging port revealed by sliding the blue collar.

2. Connect the provided USB charging cable to the flashlight's port.
3. Konekti la alian finon de la USB-kablo al kongrua USB-fonto de elektro (ekz., mura adaptilo, komputila USB-pordo).
4. An indicator light will show charging status. Refer to the product packaging or specific indicator behavior for full charge notification.
5. Once fully charged, disconnect the cable and securely close the protective collar over the USB port to maintain water resistance.

Figure 5: The USB charging port securely covered by the blue collar.

Funkciaj Instrukcioj

Powering On/Off and Changing Light Modes

The flashlight features multiple light modes. Press the tail cap power button to cycle through them:

1. Unua Gazetaro: Activates Flood + Spotlight mode (3,400 lumens).
2. Dua Gazetaro: Switches to Flood mode (1,500 lumens).
3. Tria Gazetaro: Switches to Spotlight High mode (2,000 lumens).
4. Kvara Gazetaro: Switches to Spotlight Low mode (600 lumens).
5. Kvina Gazetaro: Turns the flashlight off.

To turn off the flashlight from any mode without cycling through all modes, press and hold the power button for approximately 2 seconds.

Uzante kiel Power Bank

The DieHard 41-6646 can be used to charge other USB-powered devices.

1. Expose the USB charging port by twisting or sliding the blue collar.
2. Connect your device's charging cable to the flashlight's USB port.
3. The flashlight will begin charging your device. Monitor your device's charging indicator.
4. Disconnect your device once charging is complete and securely close the protective collar.

Prizorgado

Purigado

• Viŝu la korpon de la torĉlampo per mola, damp ŝtofo.
• Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.
• Ensure the charging port is free of dust and debris. Use a dry, soft brush if necessary.

Stokado

• Konservu la poŝlampon en malvarmeta, seka loko for de rekta sunlumo kaj ekstremaj temperaturoj.
• For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.

Solvado de problemoj

If you encounter issues with your DieHard flashlight, refer to the following common problems and solutions:

• Flashlight Not Turning On or Low Brightness:
  • Ensure the battery is fully charged. Connect to a power source and allow sufficient charging time.
  • Premu firme la butonon de potenco.
• Charging Issues (Flashlight not charging or cable not staying in port):
  • Verify the USB charging cable is fully inserted into the flashlight's port. The protective collar must be completely open to allow proper connection.
  • Ensure the charging cable and the USB power adapter are functional. Try a different cable or adapter if available.
  • Check the charging port for any obstructions or damage.
• Mallonga Bateria Daŭro:
  • High lumen modes consume battery power more rapidly. Consider using lower lumen modes for extended runtimes.
  • Ensure the flashlight is fully charged before each use.
• Overheating or Unusual Odor During Charging or Operation:
  • Immediately disconnect the flashlight from any power source and discontinue use.
  • Contact customer support for assistance. Do not attempt to disassemble or repair the device.

Specifoj

Garantio kaj Subteno

Informoj pri Garantio

The DieHard 41-6646 flashlight comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, accident, unauthorized repair, or modification.

Bonvolu konservi vian pruvon de aĉeto por garantiaj reklamoj.

Klienta Subteno

For technical assistance, warranty claims, or questions regarding your DieHard flashlight, please refer to the contact information provided with your product packaging or visit the official DieHard webretejo por subtenaj rimedoj.