DIRECTV RC73, 4336303112

Uzanto-manlibro de la teleregilo DIRECTV RC73 IR/RF

Model: RC73, 4336303112

Produkto Finisview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

Agordi

1. Bateria Instalado

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. Trovu la kovrilon de la kuirilaro sur la dorso de la teleregilo.
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. Enmetu du AA-bateriojn, certigante, ke la pozitiva (+) kaj negativa (-) terminaloj ĝuste akordiĝas kun la indikiloj en la kupeo.
  4. Remetu la kovrilon de la bateriujo, ŝovante ĝin reen en la lokon ĝis ĝi klakas sekure.
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. Point the remote at your DIRECTV receiver.
  2. Samtempe premu kaj tenu la MUTE butono kaj la ELEKTU button on the remote for approximately 5 seconds.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. Premu la KANALU SUPREN butonon unufoje.
  6. Premu la ENTER button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. Premu la ELEKTU (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. Premu la MENUO button on your DIRECTV remote.
  2. Navigate down using the KANALO MALSUPREN button to find and select Agordoj.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select Teleregilo.
  4. From the Remote Control Setup menu, select Paro / Programo Malproksima.
  5. Elektu Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the POTENCO button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

Funkciaj Instrukcioj

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

Ŝlosilaj Butonaj Funkcioj
ButonoFunkcio
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
GVIDILOPress once for On-Screen Guide. Press twice for programming grouped into categories.
MENUOAccesses the main menu for settings, recordings, and more.
LISTODisplays the LIST of your recorded programs.
ELIREJOExits the current menu and returns to the previous channel viewred.
ELEKTUSelects the item highlighted on screen.
INFODisplays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL (Volumo)Adjusts the volume of your TV or audio device (if programmed).
CH (Kanalo)Ŝanĝas la kanalon supren aŭ malsupren.
PREVReturns to the PREVIOUS channel viewred.
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
MUTESilenzigas la sonon.
RIPETUReplays the previous six seconds.
REVENURewinds at increasing speeds—press up to four times.
LUDO/PAUZOPlays the current program. Press once while the program is playing to PAUSE.
DASH (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
AVANTAAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
RAPIDE-AŬENFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

Prizorgado

Anstataŭigo de Baterio

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. Forigu la malnovajn bateriojn.
  3. Insert two new AA batteries, observing the correct polarity (+/-).
  4. Remetu la kovrilon de la kuirilaro.

Purigado

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

Solvado de problemoj

Oftaj Problemoj kaj Solvoj
TemoEbla KaŭzoSolvo
Remote not responding to receiver.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.Malalta bateria potenco.Anstataŭigi pilojn tuj.
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

Specifoj

Garantio kaj Subteno

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV webretejo. Garantiaj kondiĉoj povas varii.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

Interretaj Rimedoj:

Rilataj Dokumentoj - RC73, 4336303112

Preview Gvidilo pri DIRECTV Genie kaj Universala Teleregilo
Ampleksa gvidilo por kompreni la funkciojn de DIRECTV Genie kaj Universalaj teleregiloj, inkluzive de detalaj klarigoj pri butonoj kaj programaj instrukcioj por diversaj DIRECTV-riceviloj kaj televidiloj.
Preview Gvidilo pri Universala Teleregilo de DIRECTV: Komenco kaj Programado
Lernu kiel uzi vian universalan teleregilon DIRECTV, kompreni butonfunkciojn, kaj programi vian teleregilon RC73 por komercaj kontoj. Inkluzivas agordajn instrukciojn kaj funkciojn.
Preview Gvidilo pri Agordo kaj Aktivigo de DIRECTV Wireless Genie Mini
Paŝon post paŝo instrukcioj por konekti, agordi, aktivigi kaj programi vian novan DIRECTV Wireless Genie Mini por senjunta videodistro.
Preview Aktivigo de DIRECTV Genie 2 Servilo kaj Instrukcioj pri Redono de Ekipaĵo
Paŝon post paŝo gvidilo por aktivigi vian anstataŭigan DIRECTV Genie 2 Servilon kaj resendi vian malnovan ekipaĵon por eviti ne-revenajn kostojn. Inkluzivas agordajn, parigantajn kaj resendajn procedurojn.
Preview Produkta Manlibro de DIRECTV Genie 2 - Trajtoj, Specifoj kaj Sekurecaj Informoj
Ampleksa produkta manlibro por la DIRECTV Genie 2 satelita ricevilo, kovrante detalojn pri aparataro, funkciojn, problemsolvadon, LED-indikilojn, sekurecajn antaŭzorgojn kaj informojn pri garantio. Inkluzivas agordajn kaj funkciigajn gvidojn.
Preview Gvidilo pri instalado de DIRECTV Wireless Genie Mini C41W
Paŝon post paŝo gvidilo por instali kaj konekti la DIRECTV Wireless Genie Mini (Modelo C41W) al via Genie HD DVR por plibonigita hejma distro.