Prime TNOREM02

Prime TNOREM02 Outdoor Remote Control with 2 Outlets and Wireless Transmitter User Manual

Model: TNOREM02

Enkonduko

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Sekurecaj Informoj

Bonvolu legi kaj kompreni ĉiujn sekurecajn instrukciojn antaŭ ol uzi ĉi tiun produkton. Malsukceso sekvi ĉi tiujn instrukciojn povas rezultigi elektran ŝokon, fajron aŭ gravan vundon.

Enhavo de Pako

Kontrolu, ke ĉiuj eroj ĉeestas en la pakaĵo:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Produktaj Trajtoj

Close-up of Prime TNOREM02 Receiver Outlets

Bildo: Proksimfoto view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Agordi

  1. Elektu Lokon: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Enŝaltu ricevilon: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Konekti Aparatojn: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Funkciaj Instrukcioj

Using the Prime TNOREM02 is straightforward:

Prizorgado

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Remetu la kovrilon de la kuirilaro sekure.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Solvado de problemoj

ProblemoEbla KaŭzoSolvo
Devices do not turn ON/OFF.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Overload protection triggered.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Reduced wireless range.
  • Obstrukcoj inter dissendilo kaj ricevilo.
  • Weak transmitter battery.
  • Interfero de aliaj sendrataj aparatoj.
  • Relocate the receiver or transmitter to minimize obstructions.
  • Anstataŭigi la dissendila baterio.
  • Move the unit away from other strong wireless signals.
La aparato ĉesis funkcii post iom da uzado.
  • Fiasko de interna komponanto.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Specifoj

KarakterizaĵoDetalo
Modela NombroTNOREM02
MarkoPrime
Nombro de ellasejoj2 (3-prong grounded)
Drato TipoSJTW 14/3 Gauge
Ŝtopilo TipoRight Angle, Grounded
UzadoSubĉiela
Max Vatoj1875 vatoj
Maks Amps15 Amps
Maksimumaj Voltoj125 Voltoj
Max Horsepower1 / 3 HP
Sendrata GamoĜis 80 futoj
Dissendilo BaterioCR2032 3V Button-Cell
Produktaj Dimensioj8 x 6.2 x 2.1 coloj (proksimume)
Item Pezo0.01 ounces (for remote control)
Konekteca TeknologioBluetooth
AtestojNot explicitly detailed, but designed for outdoor electrical use.

Garantio kaj Subteno

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webretejo aŭ kontaktu iliajn klientajn subtenajn kanalojn.

Rilataj Dokumentoj - TNOREM02

Preview PRIME SmartOutlets + Remote Control User Guide and Regulatory Information
Comprehensive guide for PRIME SmartOutlets + Remote Control, covering setup, re-syncing, warranty, and FCC/IC regulatory compliance. Learn how to use and troubleshoot your smart home devices.
Preview PRIME 2 Outlet Wall Tap with USB Chargers - User Guide and Warranty
Detailed instructions, regulatory information, and warranty details for the PRIME 2 Outlet Wall Tap with USB Chargers (Model USB05) from Prime Wire & Cable, Inc.
Preview PRIME-750B Power Supply Unit: Quick Start Guide and Safety Information
Comprehensive guide for the PRIME-750B power supply unit, covering essential safety information, installation steps, component connection, powering up instructions, and technical specifications. Includes details on electrical safety, ventilation, hardware compatibility, and protection features.
Preview PRIME SmartOutlets Installation and Safety Information
Installation instructions, safety information, and specifications for PRIME SmartOutlets remote-controlled outdoor smart plugs. Includes setup guide, app connection, and regulatory compliance.
Preview Prime TNRCCD21 Plug-in Receiver and Remote Control User Manual
Comprehensive user manual for the Prime TNRCCD21 plug-in receiver and remote control system. Includes setup instructions, operation guide, helpful tips, battery replacement, FCC/IC compliance, and warranty information.
Preview Prime EZ-Set Indoor Digital Timer TNIDP12: User Manual and Programming Instructions
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.