Televes 5363 Multiband Amppli viva Uzanta Manlibro

1. Enkonduko

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Ĉefaj Trajtoj:

• Larĝbendo ampligo.
• Incorporates switched-mode power supplies.
• Allows mixing of MATV signals via an independent input.
• Kompaktaj dimensioj: 180 x 110 x 55 mm.
• High-shielding chassis, manufactured from Zamak.
• Apartigi amplification with very low noise figure, preserving signal quality.
• Ultra-reduced ergonomic design.

Bildo 1: Malantaŭa view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Sekurecaj Informoj

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Elektroprovizo: Ensure the device is connected to a power outlet with the correct voltage and frequency as specified in the technical specifications.
• Ventolado: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
• Humideco: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp medioj.
• Purigado: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
• Servado: Ne provu mem servi ĉi tiun produkton. Rekomendu ĉiujn servojn al kvalifikita servistaro.
• Muntado: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. Pako Enhavo

Kontrolu, ke ĉiuj eroj ĉeestas en la pakaĵo:

• Televes 5363 Multiband Amppli viva
• Power cable (integrated or separate, depending on model variant)
• Instrukcia Manlibro (ĉi tiu dokumento)
• Muntaj akcesoraĵoj (ŝraŭboj, murŝtopiloj)

4. Instalado kaj Instalado

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Muntado de la Amppli viva

1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
2. Mark the positions for the mounting screws on the wall or surface.
3. Drill pilot holes if necessary and insert wall plugs.
4. Sekurigu la amplifier using appropriate screws.

4.2. Connecting Signals

La amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amppli viva.

1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
2. SAT Input: Connect your satellite dish signal cable to the designated SAT input.
3. Eligo: Konektu la eliron de la amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Potenca Konekto

Konektu la elektran kablon al la amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Figuro 3: Fronto view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Operacio

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

La amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Gajna Alĝustigo

La amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Prizorgado

To ensure optimal performance and longevity of your Televes 5363 Multiband Ampvivigilo, sekvu ĉi tiujn simplajn prizorgadajn gvidliniojn:

• Purigado: Periodically clean the exterior of the amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ventolado: Ensure that the ventilation slots are free from dust and obstructions to prevent overheating.
• Konektoj: Foje kontrolu ĉiujn kablokonektojn por certigi, ke ili estas sekuraj kaj liberaj de korodo.
• Medio: Konservu la amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.

7. Respondecaj problemoj

If you encounter issues with your Televes 5363 Multiband Ampvivigilo, vidu la jenajn oftajn problemojn kaj solvojn:

• Neniu Signalo:
  • Check all cable connections to ensure they are properly seated.
  • Kontrolu ke la amplifier is receiving power (check power indicator light if available).
  • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
• Weak or Poor Quality Signal:
  • Check the quality of the input signals before they reach the amppli viva.
  • Ensure all connections are tight and free from damage or corrosion.
  • Kontrolu ke la amplifier's gain settings (if adjustable) are appropriate for your installation.
• Neniu Potenco:
  • Check the power cable connection to both the amplifier and the electrical outlet.
  • Test the electrical outlet with another device to ensure it is functional.

If the problem persists after attempting these solutions, contact qualified technical support.

8. Teknikaj Specifoj

9. Garantio kaj Subteno

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes webretejo.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes webretejo.