Ensenior LED Ceiling Light User Manual

Ensenior LED Ceiling Light2

qr code

http://eepurl.com/gtxRkr

Rewarding
Scan the QR code to fill the form, you will get 1 Free EXTRA YEAR Warranty.
You also get the chance of participating in our FREE PRODUCT TRIALS and Coupon!

Ensenior LED Ceiling Light 6

logo 2 SAFETY INSTRUCTION

Senior s recessed lighting is certified by ETL & Energy Star of a high standard. This canless LED recessed light is IC rated, with more convenient and secure UL connectors. But to reduce the risk of death, personal injury, or property damage from fire, electric shock, and other hazards, please read all warnings and instructions included th and on the fixture box and all fixture labels, please review instructions carefully before proceeding.

logo 4 WARNING

logo 3 RISK OF ELECTRIC SHOCK

  • All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
  • Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
  • Turn off the switch and circuit breaker before installing this LED light.
  • Do not alter, re-locate or remove wiring.
  • Double-check all connections to be sure they are tight and correct.
  • Verify that supply voltage is correct by comparing it with the luminaire label information.

logo 5 RISK OF FIRE

  • Keep combustibles and other materials that may burn away from lights.
  • The maximum ambient temperature is 104°F. Do not operate fixtures at temperatures higher than it.

logo 4 CAUTION

logo 6 RISK OF INJURY

  • The knockouts may be sharp. Wear gloves and safety glasses at all times when removing luminaire, installing, or performing maintenance.
  • Avoid direct eye exposure to the light source while it is on.
  • Wear rubber-soled shoes and work on a sturdy wooden ladder.

logo 7 RISK OF BURN

  • Do not touch the enclosure or light source. It is normal for the luminaire surface to heat up during work. Allow lights to cool before handling.

logo 4 RISK OF PRODUCT DAMAGE

  • Do not restrict fixture ventilation. Allow for some volume of airspace around the fixture. Avoid covering LED fixtures with insulation, foam, or other material that will prevent convection or conduction cooling.
  • Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be worn during all installation or servicing of the unit.
  • Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
  • Do not mix our product with other products (including Ensenior’s light, eg. 4″ and 8″). Mixing junction boxes of different power will lead to the destruction of the product.
  • Do not let the product directly contact with water. Our product is damp-rated but it is not water-proof.
  • Do not make or alter any open holes in an enclosure of wiring or electrical components.
  • Never connect components under load.
  • Please make sure that all wires in and out are wired firmly and sufficiently. If not, there will be a flickering issue or the light will just stop.

IMPORTANT

  1. Our temperature has been strictly monitored. But the temperature will be slightly different with varied monitors. Please test them before installation up in the ceiling wall and see the color if it meets your needs.
  2. If there is anything wrong with our lights, please see the Troubleshooting Page. If You could not find an answer on that page, please refer to the Customer Service page and contact us.

ROUTINE MAINTENANCE

  1. Please make sure the power is off before maintenance.
  2. To avoid any damage to the product, please do not use any chemical solvents during routine maintenance.
  3. To ensure better lighting, please clean the lamp at regular intervals.

LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials for up to 5 years from the date of purchase.
If  it fails to do so, please contact the Customer Service Team at
+1 (213)-296-2111 or visit
service@ensenior.net.

seting STEP-BY-STEP INSTALLATION

TOOLS REQUIRED: Saw, Measuring Tape, Electrical Wiring (The wire should be AWG14-18 for application to connect the fixture), Safety glasses, and gloves.

  • Cut a hole with the 1:1 size of the cutting template.

Ensenior LED Ceiling Light 4

  • Open the junction box and remove knock-out on the side.
  • Run a wire from the power source through the hole.

Ensenior LED Ceiling Light 5

  • Use the connector to tuck the wires according to the color.

Ensenior LED Ceiling Light 7

  • Connect (tightly by hand) the junction box to the light panel.

Ensenior LED Ceiling Light 8

  • Put the box in the ceiling hole. Push up the spring clips

Ensenior LED Ceiling Light 45

  •  Push the light into the ceiling and power it on.

Ensenior LED Ceiling Light 9

SPECIFICATIONS

SPECIFICATIONS 4″ 6″
Voltage 120V 120V
Wattage 9W 12W
Current 0.075A 0.1A
Power Factor 0.9 0.9

LIGHTING PERFORMANCE

Lumens 750LM 1050LM
Equivalency 75W 110W
Color Temperature 2700K-6000K 2700K-6000K
Color Rendering Index(CRI) > 80 > 80
Beam Angle 120° 120°
Dimmable Yes Yes
Efficiency(Im/w) 83lm/w 87.5Im/w
Trim Color WH/BLK/BNI WH/BLK/BNI

ENVIRONMENT

Operating Temperature 14°F to 104°F 14°F to 104°F
Suitable Damp Location Yes Yes
Fits Around Joists Yes Yes
Fits Soffit to DoubleDrywall Ceilings Yes Yes

CONSTRUCTION

Housing Material AJuminum+PC AJuminum+PC
Weight 300g 410g

LIFESPAN

Average Life(hours) 50000+ 50000+
Warranty 5 years 5 years
Switching Time >40000 >40000

logo 10 DIMMER COMPATIBILITY GUIDE

Ensenior LED Ceiling Light 12

logo 1 COMMON TROUBLESHOOTING

We are an LED manufacturer with 10-year experience and receive feedback from more than 1000 customers every year. According to our statistics, 95% of customers’ problems are related to the method of installation and the use of dimmer, which could be solved by customers themselves. To save your valuable time, please read this introduction first to quickly identify the cause, if you encounter any problems.

Problems you may encounter

PROBLEM

POSSIBLE CAUSE

SOLUTION

Unlit the wire falls off/ loosens/ breaks Double-check the connection of the wire.
the connector is missing or the connector lacks metal shrapnel Double-check the connector.
Voltage is too high Install the lights on 110 volts.
Dim the wire falls off/ loosens/ breaks Double-check the connection of the wire.
not setting the dimmer right Double-check the setting.
mix the junction boxes (4″ and 6″) Check the Voltage, 9W for 4″ and 12W for 6″.
Compatible dimmer, but too many lights connect to one dimmer compatible dimmer, but too many lights connect to one dimmer (Total Power of the Lightss80% of the Rated Power of the Dimmer)
the total brightness of the lights/house area: too small Install more lights. Recommended spacing for installation of 4″ lights: 2-4ft (6″:5-7ft)

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

Flickering the wire falls off/ loosens/ breaks Double-check the connection of the wire.
not setting the dimmer right Double-check the setting.
mix the junction boxes (4″ and 6″) Check the Voltage, 9W for 4″ and 12W for 6″.
(x) incompatible dimmer Select a dimmer from the recommended dimmer list.
(,r)compatible dimmer, but too many lights connect to one dimmer Connect fewer lights to the one dimmer. (Total Power of the Lightss75% of the Rated Power of the Dimmer)
high-power electrical appliances on the same circuit Remove and set them further away from each other.
Buzzing noise from dimmer/ Junction box/ circuit break-er(>20Db) (x) incompatible dimmer

 

Select a more compatible dimmer from the recommended dimmer list (5 stars).
(j) compatible dimmer, but too many lights connect to one dimmer Reduce the number of lights connected to the one dimmer. (Total Power of the Lightss75% of the Rated Power of the Dimmer)
(x) incompatible circuit breaker A. Mechanical circuit breaker: replace a compatible dimmer.
B. Electronic control circuit breaker: replace the circuit breaker first.
high-power electrical appliances on the same circuit(radio, air conditioners, refrigerators, etc.) Remove and set them further away from each other.

logo 113 CUSTOMER SERVICE

logo 1430-day money-back guarantee for any reason
For 30 days after the date of purchase, return your Ensenior product and receive a full refund for ANY reason.

logo 2556Quick response within 12 hours
If there is any problem with our light, please refer to the Troubleshooting page on the back. If you still could not fix this, please contact us immediately. It doesn’t matter if you have installed the product we will respond within 12 hours.
The fastest way to help us confirm the problem is to send us a video of the problematic light to Our official email box.

logo 345-year warranty for quality-related issues
For 5 years after the date of purchase, if there is an issue with the product, we will send a new product for free or a full refund. (no need to return the purchased product) Under most conditions. we will not require you to return the purchased hems. Sure, if you would return the defective one(s) to us, we will be very happy for that would help us to make continuous improvements.

logo 11378Friendly reminder
We sincerely hope to solve the problem for you. We do not recommend that you leave a product rating first, because we cannot obtain your contact information through the review/feedback, nor can we obtain your relevant information and provide you with compensation.
Please rest assured that our service aim is to make customers 100% satisfied. If there is any problem, please contact us as soon as possible, we will not let you down.

logo 1 CONTACT US

Contact the US
Contact by “Ask a question” on the “Ensenior” Seller Page, and attach your e-mail address to the message(7x24H) Because Amazon’s information system sometimes can’t successfully receive and send information, in which case you may not receive our response. We will never be able to reply to your inquiry. If you find that we have not responded to you within 24 hours, please send us an e-mail. Contact via Email: service@ensenior.net(7x24H) Call us: .1(213)-296-2111(Monday-Sunday 17:00-21:00 PST)

Ensenior LED Ceiling Light

Documents / Resources

PDF thumbnailLED Ceiling Light
User Manual · LED Ceiling Light

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. What size wire should I use to connect the lights?

    Charles Profit asks What size wire should I use to connect the lights?
    Manuals+ clarified question
    Question

    What wire size should be used for Ensenior LED Ceiling Light installation?

    Answer

    According to the Step-by-Step Installation section of the Ensenior LED Ceiling Light manual, the recommended wire size for connecting the fixture is AWG 14-18.

    Additionally, the manual notes that all electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, it is recommended to consult a qualified electrician.

  2. Hi, Does Lutron dimmer DVCL-153P, fits with 6 Ensenior recessed LED ? Thank you

    Maurice Maheu asks Hi, Does Lutron dimmer DVCL-153P, fits with 6 Ensenior recessed LED ? Thank you
    Manuals+ clarified question
    Question

    Is the Lutron DVCL-153P dimmer compatible with 6 Ensenior recessed LED lights?

    Answer

    Yes, the Lutron DVCL-153P is listed as a compatible dimmer in the Ensenior LED Ceiling Light manual. It is rated for 3-way use with a capacity of 150W.

    When installing 6 lights, please ensure you follow these guidelines from the manual to avoid flickering or buzzing:

    • Total Power: Ensure the total wattage of the 6 lights is less than the rated power of the dimmer (150W). For example, if you are using the 6-inch 12W models, 6 lights would total 72W, which is well within the limit.
    • Dimming Range: If the lights turn off before reaching minimum brightness or flicker at low levels, you may need to adjust the dimming range on the Lutron switch itself as per Lutron's instructions.
    • Circuit Load: The manual recommends that the total power in the circuit (lights + dimmer) should be less than the rated value, ideally keeping the total power of the lights at ≤ 75-80% of the dimmer's rated power for optimal performance.
  3. Steps to syncing a wireless switch to recessed lights

    Steve Fitts asks Steps to syncing a wireless switch to recessed lights
    Manuals+ clarified question
    Question

    How do I sync a wireless switch to Ensenior recessed lights?

    Answer

    The provided manual for Ensenior LED Recessed Ceiling Lights does not include instructions for syncing a wireless switch, as these lights are designed for hardwired installation into a standard electrical circuit. However, based on the manual and general product usage, here is the relevant information:

    • Hardwired Compatibility: These lights are designed to be controlled by physical, hardwired wall dimmers. The manual provides a Dimmer Compatibility Guide listing specific models from brands like Lutron (e.g., Caseta Smart PD-6WCL, Diva DVCL-153P) and Leviton.
    • Smart Switch Syncing: If you are using a wireless smart switch (like a Lutron Caseta or a Wi-Fi enabled wall switch), the "syncing" process occurs between the switch and its hub/app, not the lights themselves. Once the switch is wired to the lights and synced to its respective app, it will control the Ensenior fixtures.
    • Wireless Remote Kits: If you are using a third-party wireless remote relay kit, you must install the receiver module between the power source and the Ensenior junction box.

    Important Note: Ensure that any wireless switch or dimmer used does not exceed the rated power of the circuit and is compatible with LED fixtures to avoid flickering or buzzing. If you are using a specific brand of wireless switch, please refer to that manufacturer's manual for pairing instructions.

    For further assistance, you can contact Ensenior support at service@ensenior.net or call +1(213)-296-2111.

  4. I have 28 1050LM Ensenior slim recessed LED lights. 4 of the small blue spring tabs broke. Where can I get replacements?

    Larry L Stelck asks I have 28 1050LM Ensenior slim recessed LED lights. 4 of the small blue spring tabs broke. Where can I get replacements?
    Manuals+ clarified question
    Question

    Where can I get replacement blue spring tabs for Ensenior 1050LM slim recessed LED lights?

    Answer

    Ensenior does not explicitly list individual replacement spring tabs for sale on their website or in the manual. However, because your product carries a 5-year warranty for quality-related issues, you should contact their customer support team to request replacements or a solution.

    You can reach Ensenior support through the following channels:

    • Email: service@ensenior.net (Available 24/7)
    • Phone: +1(213)-296-2111 (Monday-Sunday 17:00-21:00 PST)
    • Amazon: Go to the product listing, click on "Ensenior Direct," and select "Ask a Question."

    When contacting them, mention that you have the 1050LM model and that the spring tabs have broken. They typically respond within 12 to 24 hours.

    Note: If you haven't already, you can scan the QR code on your manual to register for an additional free year of warranty.

  5. Hello, trying to find model # ERL-12X-ETL
    16 pack 6″LED 12W 2700K
    can you please help find it on your site or Amazon…thx!

    Michael Nasr asks Hello, trying to find model # ERL-12X-ETL
    16 pack 6"LED 12W 2700K
    can you please help find it on your site or Amazon...thx!
    Manuals+ clarified question
    Question

    Where can I find the Ensenior LED Ceiling Light model ERL-12X-ETL (16 pack, 6-inch, 12W, 2700K)?

    Answer

    Based on the manual for Ensenior LED Ceiling Lights, the model number ERL-12X-ETL corresponds to their 6-inch, 12W recessed lighting series. While we host the documentation for these products, we do not sell them directly.

    To find this specific 16-pack on Amazon or the web, you can follow these steps provided in the manual's contact section:

    • Amazon Search: Log into your Amazon account and search for "Ensenior 6 inch LED recessed light 2700K 16 pack" or the specific model number ERL-12X-ETL.
    • Ensenior Direct Store: Look for the "Ensenior Direct" seller profile on Amazon to ensure you are viewing their official listings.
    • Direct Support: If you cannot find the exact listing, you can contact Ensenior support directly at service@ensenior.net or call them at +1(213)-296-2111 (Monday-Sunday 17:00-21:00 PST).

    Note: Model numbers can sometimes vary slightly by packaging size (e.g., 12-pack vs 16-pack), so searching by the specifications "6 inch 12W 2700K" is often the most effective way to locate the current stock.

  6. Are Ensenior recessed ceiling lights rated for wet/damp areas such as bathroom showers?

    KEEHN TOM asks Are Ensenior recessed ceiling lights rated for wet/damp areas such as bathroom showers?
    Manuals+ clarified question
    Question

    Are Ensenior recessed ceiling lights rated for wet or damp areas like bathroom showers?

    Answer

    According to the Ensenior LED Ceiling Light User Manual, these lights are damp-rated but are not water-proof. The manual specifically states: "Do not let the product directly contact with water. Our product is damp-rated but it is not water-proof."

    For bathroom installations, they are suitable for areas with high humidity (damp locations), but they should not be installed in a position where they will be directly sprayed or splashed with water, such as inside a shower stall where direct water contact is likely.

  7. 6” recessed led lighting is is user friendly and economical.
    Question is Levittown 6674 POW SureSlide universal 150w led dimmer compatible with your recessed lighting? Or are Lutron dimmers only suitable?

    William Leisy asks 6” recessed led lighting is is user friendly and economical.
    Question is Levittown 6674 POW SureSlide universal 150w led dimmer compatible with your recessed lighting? Or are Lutron dimmers only suitable?
    Manuals+ clarified question
    Question

    Is the Leviton 6674 SureSlide universal 150W LED dimmer compatible with Ensenior 6-inch recessed LED lighting?

    Answer

    Based on the Ensenior LED Ceiling Light User Manual, the Leviton 6674 SureSlide is not explicitly listed in the provided Dimmer Compatibility Guide. The manual primarily highlights several Lutron models (such as the DVCL-153P, SCL-153P, and MACL-153M) as tested and compatible.

    Ensenior notes that dimming compatibility is a challenge and recommends selecting a dimmer from their tested list to avoid issues like flickering or buzzing. If you choose to use the Leviton 6674, please ensure:

    • The total power of the lights connected is less than the 150W rated power of the dimmer.
    • You do not mix junction boxes from different brands or sizes (4-inch vs 6-inch).

    If you experience a small dimming range or flickering with the Leviton dimmer, the manual suggests adjusting the dimmer's minimum brightness setting if applicable. For definitive confirmation on unlisted models, you can contact Ensenior support at service@ensenior.net or call +1(213)-296-2111.

  8. Can the dimmable lights be used with a regular switch?

    Chuck asks Can the dimmable lights be used with a regular switch?
    Manuals+ clarified question
    Question

    Can the Ensenior dimmable LED ceiling lights be used with a standard on/off switch?

    Answer

    Yes, you can use the Ensenior LED Ceiling Light with a regular (non-dimming) on/off switch. When used with a standard switch, the light will operate at its full 100% brightness level whenever it is turned on.

    However, if you wish to utilize the dimming feature, the manual emphasizes that you must use a compatible dimmer from their tested list (such as specific Lutron models like DVCL-153P or MACL-153M) to avoid issues like flickering, buzzing, or reduced lifespan. If you are currently experiencing issues like flickering or buzzing while using a standard switch, ensure that the total power in the circuit is stable and that no high-power devices (like air conditioners or refrigerators) are causing voltage fluctuations on the same circuit.

  9. Hi
    I am really surprised that either (a) no one has informed you that, in North America, you cannot run electrical wiring into a metal junction box without a cable connector to secure it or (b) that you continue to ignore that information and publish instruction manuals showing a wire going into the box without a connector. That is not very responsible.

    edee_em asks Hi
    I am really surprised that either (a) no one has informed you that, in North America, you cannot run electrical wiring into a metal junction box without a cable connector to secure it or (b) that you continue to ignore that information and publish instruction manuals showing a wire going into the box without a connector. That is not very responsible.
    Manuals+ clarified question
    Question

    Does the Ensenior LED Ceiling Light installation require a cable connector for the junction box to comply with North American electrical codes?

    Answer

    The user is correct regarding safety standards. According to the National Electrical Code (N.E.C.) in North America, any cable entering a metal junction box must be secured with a proper cable connector (strain relief) to protect the wire from sharp edges and ensure it is not pulled loose. While the Ensenior LED Ceiling Light manual mentions that the product includes "more convenient and secure UL connectors" for internal wiring, the step-by-step instructions for the junction box simply state to "Run a wire from the power source through the hole" after removing the knockout.

    To ensure a safe and code-compliant installation, you should:

    • Use a Cable Connector: Always install a UL-listed cable connector in the junction box knockout before threading your supply wire through.
    • Follow Local Codes: As stated in the manual's warnings, all electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
    • Consult a Professional: If you are unfamiliar with these requirements, the manufacturer recommends consulting a qualified electrician.

    If you have further concerns about the hardware provided or the manual's illustrations, you can contact Ensenior support at service@ensenior.net or call +1 (213)-296-2111.

    Note: Manuals+ is an independent repository of manuals and is not the manufacturer. We appreciate feedback regarding safety documentation.

  10. I need a dimmer for 4 ,4” lights. What dimmer do I use?

    Richard asks I need a dimmer for 4 ,4” lights. What dimmer do I use?
    Manuals+ clarified question
    Question

    What dimmers are compatible with Ensenior 4-inch LED ceiling lights?

    Answer

    Ensenior provides a Dimmer Compatibility Guide in their manual. For your 4-inch lights (which use 9W each), the following Lutron models are highly recommended (5-star rating):

    • Lutron Caseta Smart: PD-5NE (250W) or PD-6WCL (150W)
    • Lutron Diva: DVCL-153P (150W) or DVRP-253P (250W)
    • Lutron Maestro: MACL-153M (150W)
    • Lutron Skylark: SCL-153P (150W)
    • Lutron Toggler: TGCL-153PH (150W)

    Important Installation Notes:

    • Total Power: Ensure the total wattage of your lights (4 lights x 9W = 36W) is less than the rated power of the dimmer.
    • Load Limit: The manual recommends that the total power of the lights should be ≤ 80% of the dimmer's rated power to avoid buzzing or flickering.
    • Dimming Range: If the lights turn off before reaching minimum brightness, you may need to adjust the dimmer's low-end trim setting as per the dimmer manufacturer's instructions.
  11. need tech info on solar security lights. Please provide tel. # and time to call.
    Tahnk you

    william locker asks need tech info on solar security lights. Please provide tel. # and time to call.
    Tahnk you
    Manuals+ clarified question
    Question

    What is the technical support phone number and business hours for Ensenior?

    Answer

    For technical support regarding Ensenior lighting products, you can contact their customer service department using the following details:

    • Phone Number: +1(213)-296-2111
    • Support Hours: Monday to Sunday, 5:00 PM – 9:00 PM PST
    • Email: service@ensenior.net

    Please note that while the manual provided is for Ensenior LED Ceiling Lights, the contact information should be applicable for their other lighting products as well. If you are contacting them via Amazon, you can use the "Ask a Question" button on the Ensenior Seller Page.

    If you have specific technical questions about a solar security light model, please provide the model number for more detailed assistance.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.