Product Usage Instructions
Installation:
- Visit the SECO-LARM website www.seco-larm.com for complete installation instructions.
- Read the manual provided before beginning the installation process.
- Identify the appropriate button model based on your requirements.
- Connect the button to the power source using the screw terminals.
- Mount the button securely in the desired location.
Operation:
To trigger the emergency or push-to-exit function, press the button firmly. The selected contact type (NO or NC) will be activated momentarily, depending on the model chosen.
Maintenance:
Regularly check the button for any signs of damage or wear. Clean the button surface as needed to ensure clear visibility of the labels.
FAQs
- Q: Can I change the label on the button?
- A: Yes, the Emergency & Push-to-Exit, NO/NC Button SS-075C-PEQ comes with three labels for customization: Emergency, Push to Exit, and Press Para Exit.
- Q: What is the contact rating for these buttons?
- A: The contact rating varies depending on the model chosen. It is either 0.5A@12VDC or 1.0A@12VDC.
- Q: Are these buttons suitable for outdoor use?
- A: It is recommended to check the product specifications and IP rating to determine if the buttons are suitable for outdoor installations.
PRODUCT INFORMATION
Emergency/Push-to-Exit Buttons
Please visit the SECO-LARM website www.seco-larm.com for complete installation instructions. Please read the manual before you begin the installation
Features
Emergency NO/NC Button
SS-075CQ
Features
- Large button has “Emergency” printed on the face
- NO or NC (selectable) momentary contact
- Contact rated 0.5A@12VDC
- Screw terminals
- Off-white
- Dimensions: 3″x15/16″x5/8″ (76x23x15 mm)
Emergency N.O. Button
SS-075Q
Features
- Large button has “Emergency” printed on face
- N.O. (push-to-close) momentary contact
- Contact rated 0.5A@12VDC
- Screw terminals
- Off-white
- Dimensions: 3″x15/16″x5/8″ (76x23x15 mm)
Emergency & Push-to-Exit,
NO/NC Button
SS-075C-PEQ
Features
- Three labels included: choose between “Emergency”, “Push to Exit”, and “Presione Para Salir”
- NO or NC (selectable) momentary contact
- Contact rated 1.0A@12VDC
- Screw terminals
- Off-white
- Dimensions: 3″x15/16″x5/8″ (76x23x15 mm)
CONTACT INFORMATION
- SECO-LARM® U.S.A., Inc.
- 16842 Millikan Avenue, Irvine, CA 92606
- Phone:949-261-2999
- 800-662-0800 Fax: 949-261-7326
- Website: www.seco-larm.com
- Email: sales@seco-larm.com
Copyright © 2024 SECO-LARM U.S.A, Inc. All rights reserved. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to Phone: change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Documents / Resources
 |
ENFORCER SS-075CQ Emergency Push To Exit Buttons [pdf] Installation Guide SS-075CQ, SS-075Q, SS-075C-PEQ, SS-075CQ Emergency Push To Exit Buttons, SS-075CQ, Emergency Push To Exit Buttons, Exit Buttons, Buttons |