ENFORCER SD-927PKC Wave Open Sensor Override Button
Wave-to-Open Sensor
SD-927PKC-NEQ English*, No-Touch
SD-927PKC-NEVQ English*, No-Touch, Override Button
The ENFORCER Wave-to-Open Sensor uses IR technology to allow egress from a protected area or activate a device with just a wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices. The SD-927PKC-NEVQ adds a manual override button.
Features:
- Operating voltage, 12~24 VAC/VDC
- Range adjustable from 23 /8″~8″ (6~20 cm)
- Stainless steel single-gang faceplate
- 3A relay, adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor
- Quick connect scrawls terminal block
- LED illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red when activated)
SD-927PKC-NEVQ
- Adds manual override button as a backup to the sensor
Specifications
| Model | SD-927PKC-NEQ | SD-927PKC-NEVQ | |
| Operating voltage | 12~24 VAC/VDC | ||
| Current draw (max.) | 120mA@12VDC | ||
| Relay type | Form C dry contact NO/NC/COM, 3A@24VDC | ||
| Override button | Switching capacity | N/A | 3A@24VDC |
| Mechanical life | N/A | 500,000 Cycles | |
| Response time | 10ms | ||
| LEDS | Standby | Red† | |
| Triggered | Green† | ||
| Output time | Adjustable, 0.5~30sec., toggle, or as long as sensor is triggered | ||
| Sensing range | Adjustable, 23 /8″~8″ (6-20 cm) | ||
| Operating temperature | -4°~131° F (-20°~55° C) | ||
| Dimensions | 2 3 /4″x41 /2″x11 /8″ (70x114x28 mm) | ||
| Weight | 3-oz (85g) | 3.9-oz (110g) | |
*French (SD-927PKC-NFQ, SD-927PKC-NFVQ) and Spanish (SD-927PKC-NSQ, SD-927PKC-NSVQ) faceplates also available. †Reversible by jumper
Dimensions
- Front View
- Side View
- Back View
Ordering Information
| Wave-to-Open Sensors | ||||
| Model | SD-927PKC-NEQ | SD-927PKC-NFQ | SD-927PKC-NSQ | SD-927PWCQ* |
| Language | English | French | Spanish | English, French, and Spanish Decals |
| Photo |  |
 |
 |
 |
| Wave-to-Open Sensors with Override Button | |||
| Model | SD-927PKC-NEVQ | SD-927PKC-NFVQ | SD-927PKC-NSVQ |
| Language | English | French | Spanish |
| Photo |  |
 |
 |
| Sensor Only | |||
| Model | CS-PD535-TAQ | CS-PD535-TBQ† | For our full line of OEM/private label infrared sensors, contact SECO-LARM |
| Photo |  |
 |
|
| Description | 11/4” (32mm) Sensor | 11/4” (32mm) Sensor | |
Customer Support
*For SD-927PWCQ specifications, visit www.seco-larm.com †Special order. Contact SECO-LARM for details
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: 949-261-2999 | 800-662-0800 Fax: 949-261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Copyright © 2022 SECO-LARM U.S.A, Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to Phone: change prices and specifications without notice. SECO-LARM is not responsible for misprints SECO-LARM® ENFURCEW®CRIMEBUSTER® CBA® SLI®A® .”‘ PI_SD-927PKC-NExQ_220902.docx
Documents / Resources
 |
ENFORCER SD-927PKC Wave Open Sensor Override Button [pdf] Owner's Manual SD-927PKC Wave Open Sensor Override Button, SD-927PKC, Wave Open Sensor Override Button, Sensor Override Button, Override Button, Button |
