ENDY ECS1008P CloudSwitch 8 PoE Switch
CloudSwitch 8 PoE
Cloud Managed Gigabit 55W 8-Port Pot Switch (ECS1008P)
Introduction
This Quick Start Guide is designed to guide you through the installation of the CloudSwitch 8 PoE, model ECS1008P, including hardware installation and configuration.
CloudSwitch 8 PoE
CloudSwitch Managed Gigabit 55W 8-Port PoE
Switch
- Model: ECS1008P
- 8 x 1G PoE (802.3af) ports provide high-speed connections with 55W PoE budget.
Package Contents
System Requirements
Web Browser
- Google Chrome (57.0.2987.110 and later)
- Microsoft Edge (80.0.361.103 and later)
- Mozilla Firefox (52.0 and later)
Hardware Overview
Front Panel – Ports & Buttons
- Reset to default: Press and hold for over 10 seconds, and all ports LED will go off and on.
- Then the device will be reset to factory default settings.
- Change LED display mode: Press the button to change the LED mode to display the PoE status of PoE-abled ports.
Front Panel – System & Ports LEDs
Documents / Resources
 |
ENDY ECS1008P CloudSwitch 8 PoE Switch [pdf] User Guide ECS1008P, ECS1008P CloudSwitch 8 PoE Switch, CloudSwitch 8 PoE Switch, 8 PoE Switch, Switch |