DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT

unbekannt
unbekannt
2020-12-21

Products                        Solutions                          Services


Special Documentation
Display modules A400/A401/
A402/A406/A407

Display with Bluetooth interface

Endress Hauser A406 Display

Endress Hauser logo b1

 

 

Display modules A400/A401/A402/A406/A407


1 About this document
1.1 Document function

This document is part of the Operating Instructions and serves as a reference when using the display modules with a Bluetooth interface.

Supported transmitters

  • Proline 10
  • Proline 800
1.2 Symbols used

1.2.1 Symbols for certain types of information

Symbol Meaning
Endress Hauser A406 - Info Tip
Indicates additional information.
San Pedro 800 - Sound settings Icon 5 Notice or individual step to be observed
1.3 Supplementary documentation

Endress Hauser A406 - InfoFor an overview of the scope of the associated Technical Documentation, see the W@M Device Viewer:

www.endress.com/deviceviewer

San Pedro 800 - Sound settings Icon 5Enter the serial number on the nameplate of the device to which the display module with the Bluetooth interface is connected.

2 Declaration of Conformity

Display modules A400/A401/A402/A406/A407 comply with all the applicable EC directives.

3 Product description

The display with a Bluetooth interface allows wireless access to the measuring device via the SmartBlue app.

4 Technical data
Function Bluetooth Low Energy (BLE)
Range Typically 10 m (32 ft)
5 Radio approvals
5.1 Brazil
Endress Hauser A406 - ANATEL

A0039074

XXXXX-XX-XXXXX

5.2 Europe

This device meets the requirements of the Telecommunications Directive RED 2014/53/EU:

  • EN 300 328 V2.2.2
  • EN 301 489-1 V1.9.2
  • EN 301 489-17 V2.2.1
  • EN 62311: 2008
5.3 Indonesia
A400 A401 A402 A406 A407
XXXXX/SDPPI/20XX XXXX XXXXX/SDPPI/20XX XXXX XXXXX/SDPPI/20XX XXXX XXXXX/SDPPI/20XX XXXX XXXXX/SDPPI/20XX XXXX
5.4 Japan

Japanese Radio Law and Japanese Telecommunications Business Law Compliance.

This device is granted pursuant to the Japanese Radio Law and the Japanese Telecommunications Business Law.

This device should not be modified (otherwise the granted designation number will become invalid).

5.5 Canada and United States

5.5.1 English

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • This device must accept any interference received, including interference that may cause undesired operation.

Endress Hauser A406 - InfoChanges or modifications made to this equipment not expressly approved by Endress+Hauser Flowtec AG may void the FCC authorization to operate this equipment.

Endress Hauser A406 - InfoThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Endress Hauser A406 - InfoRadio frequency radiation exposure information

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

5.5.2 Français

5.6 Mexico
Endress Hauser A406 - NOM

A0034100

5.7 Singapore

Complies with
IMDA Standards
XXXXXXXX

5.8  South Korea
Endress Hauser A406 - ICC

: Display module
: X-X-XXX-XXXX
: Endress+Hauser Flowtec AG /

5.9 Thailand
Endress Hauser A406 - Thailand

A0041906

5.10 Other countries

Other national approvals are available on request.

6 Availability
6.1 Africa

Canary Islands

La Reunion

South Africa

6.2 Asia

Armenia

China Georgia
Hong Kong India

Japan

Indonesia

Kazakhstan Kyrgyzstan
Malaysia Russia

Singapore

South Korea

Thailand United Arab Emirates
Cyprus

6.3 Australia

Australia

New Zealand

6.4 Europe

Andorra

Azores Belgium
Bosnia-Herzegovina Bulgaria

Denmark

Germany

Estonia Finland
France Georgia

Greece

Ireland

Iceland Italy
Channel Islands Kosovo

Croatia

Latvia

Liechtenstein Lithuania
Luxembourg Malta

Macedonia

Monaco

Montenegro The Netherlands
Norway Austria

Poland

Portugal

Romania Russia
San Marino Switzerland

Sweden

Slovakia

Slovenia Spain
Czech Republic Hungary

Vatican City

United Kingdom

Belarus

6.5 North America

Guadeloupe

Canada Martinique
Mexico Saint-Barthélemy

Saint Martin

USA

6.6 Oceania

American Samoa

Micronesia New Hebrides
Vanuatu

6.7 South America

Argentina

Brazil

French Guyana

Endress+Hauser                          V. 1, Rev. 2, 12-10-2020

Endress Hauser A406 - Bar code

unbekannt

www.addresses.endress.com


Endress Hauser logo b1

Documents / Resources

Endress Hauser A406 Display with Bluetooth Interface [pdf] Instructions
A40NAA, 2AIMC-A40NAA, 2AIMCA40NAA, A402, A406, A407, A406 Display with Bluetooth Interface, A406, Display with Bluetooth Interface

References

Leave a comment

Your email address will not be published. Required fields are marked *