ENP-RS485 
Module
Quick Start Guide

ENP-RS485 Module

	For indoor use only
	For humid environments, additional IP68 protection is needed
	Regularly check all parts for damage

1.  Connect the Module to the Endpoint Device and External Power Supply
   All information about Enapter devices can be found at handbook.enapter.com.
   Contact support at support@enapter.com.
   The power supply assembly, connection,operation, transportation, storageand disposal guide must be followed at every step.Endpoint device:
   • invertersj
   • ventilation systemsj
   • valvesj
   • irradiance sensorsj
   • power meters and others.
2. Screw Wi-Fi Antenna into the Port
   Module sends the collected data to the Enapter Gateway and Cloud via secure wireless connection:
   • Wi-Fi 2.4 GHe
   • Bluetooth 4.0 LE
   Make sure the antenna is connected to the port. Alternating current voltage of 110-220 V is potentially lethal!
   All assembly and installation works should be only performed with a disconnected power supply!
3. Follow the Enapter App Instructions to Connect the Device to Enapter Cloud
   https://play.google.com/store/apps/details?id=com.enapter&hl=ru
   To download the app, scan the QR-code with your
   Android or Apple mobile phone or visit app.enapter.com
   • Open the Enapter app and create an account.
   • Follow the steps to create a site.
   • Press the Add device button.”
4. Scan QR-code on the Side of Module With Enapter AppIf you can’t scan, enter Device ID and PIN manually.
   Find them on the side of the module.
5. Monitor Device Activity
   During normal operation, the LEDs indicate the status of the module. Monitor device activity in Enapter App or Enapter Cloud.

Guide version 2.1

Documents / Resources

Enapter ENP-RS485 Module [pdf] User Guide ENP-RS485 Module, ENP-RS485, Module

References

• User Manual