ELSEMA GLR433012401 Channel 433MHz Gigalink Receiver Owner's Manual
Features
- Supply voltage 110 – 240VAC
- High capacity output relay
- Pluggable type terminal blocks for easy installation
- Test push buttons for the relay
- Momentary, latching, timed and security latching output modes can be selected by the user.
- Optional QM150 bracket available for easy mounting to cases or walls
- Also available in an IP66 rated case for outdoor installations
- Power ON LED indicator
Applications
- Pump Control
- Long distance light control
- On/Off applications in agricultural devices
- Basic Telemetry eg. Water level indication
- Security alarm
Description
The GIGALINKTM , GLR43301240 is the most advanced Remote Control technology available in the world today. GIGALINKTM is an invention that has revolutionised the entire Remote Control technology including Elsema’s earlier version of FMT- … and FMR- … series. The GLR43301240 state-of-the-art invention brings a new dimension in the world of Remote Control technology in domestic, commercial and industrial applications.
Available with Options
Programming
For programming instructions, please refer to the separate programming instructions.
When programming is completed and the GIGALINK cable is removed from the receiver-coding socket, the 3-way dip switch is used to select different output modes. This is described below.
Different Modes for the Output
3-Way DIP Switch Mode Settings
The output relay will respond in the following manner when receiving the correct signal from a transmitter
Momentary – Output is active for as long as the transmitter button is pressed. This is a standard mode on most automatic gates or garage door openers.
Latching – Output remains active until next press of the transmitter button. Similar to switching “on” and “off” a light.
Security – Output remains active until power to the receiver is removed. Similar to security alarms Latching and fire alarms.
Customised Software
Custom output modes can be programmed to do special functions. Call Elsema for more details.
110 240VAC Supply, Antenna and Relay Connections
AC power supply and relay connections are via the pluggable type terminal block. Antenna is via a two-way pluggable type terminal block. Do not connect the supply to the 2.5-mm coding socket since connection will damage the microcontroller.
Applications
The receiver output can be set to different modes which allows it to be used in many diverse applications such as automatic gates, security, timer controlled outputs and simple on/off functions etc.
Unique Code System
The microcontroller EEPROM allows large volume users to have a unique code. This enables Elsema to offer everyone “your own” radio control.
Products in the Range
Technical Data
Block Diagram
Manufactured by
Elsema Pty Ltd
31 Tarlington Place, Smithfield
NSW 2164, Australia. Ph: 02 9609 4668
Website: http://www.elsema.com
Documents / Resources
 |
ELSEMA GLR433012401 Channel 433MHz Gigalink Receiver [pdf] Owner's Manual GLR433012401 Channel 433MHz Gigalink Receiver, GLR433012401, Channel 433MHz Gigalink Receiver, Gigalink Receiver, Receiver |