E021201-E021388 Expansion Module
“
Product Specifications
- Compatible with: E021201 (15 I-Series Android), E021388 (22
I-Series Android) - Revision: A P/N E231725
- VESA Mount: 100x100mm M4 thread on the back of the expansion
module - M3X8mm LONG Screws, QTY. 2
- M4X32mm LONG Screws, QTY. 2
- M4X7mm LONG Screws, QTY. 2
Product Usage Instructions
- Remove the DC power cover (D) and bottom peripheral cover
(E). - Assemble the micro-USB bracket using screws (C).
- Assemble the expansion module to the VESA mount on the back of
the i-Series using screws (A) and (B). Connect the DC power and
micro-USB connections as shown. - Connect the power supply provided with the expansion module to
the DC jack on the expansion module. - Continue the installation of the i-Series Display as desired
using stands and mounts available at www.elotouch.com.
Frequently Asked Questions (FAQ)
Q: Can I use this expansion module with other Elo Touch
Solutions products?
A: No, this expansion module is specifically designed for use
with the E021201 and E021388 models.
Q: What is the warranty period for this product?
A: Please refer to the warranty information provided with your
purchase or visit our website for details on warranty coverage.
Q: Do I need any special tools for installing the expansion
module?
A: No special tools are required for installation. The necessary
screws and components are provided with the product.
“`
Elo Touch Solutions Technical Support Online self-help: www.elotouch.com/go/websupport
Technical Support contacts in your region: www.elotouch.com/go/contactsupport
North America Elo Touch Solutions 1033 McCarthy Boulevard Milpitas, CA 95035
800-ELO-TOUCH Tel +1 408 597 8000 Fax +1 408 597 8050 customerservice@elotouch.com
Europe Tel +32 (0)16 70 45 00 Fax +32 (0)16 70 45 49 elosales@elotouch.com
Asia-Pacific Tel +86 (21) 3329 1385 Fax +86 (21) 3329 1400 www.elotouch.com.cn
Latin America Tel 786-923-0251 Fax 305-931-0124 www.elotouch.com
* E2 3 1 7 2 5 REV. A*
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
© 2016 Elo Touch Solutions, Inc. All rights reserved.
www.elotouch.com
Quick Installation Guide
Elo Expansion Module
Compatible with following products: E021201 (15″ I-Series Android) E021388 (22″ I-Series Android)
Revision A P/N E231725
100x100mm M4 thread VESA mount on back of expansion module
C M3X8mm LONG,
QTY. 2
E D
1. Remove DC power cover (D) and bottom peripheral cover (E).
A M4X32mm LONG,
QTY. 2
B M4X7mm LONG,
QTY. 2
3. Assemble micro-USB bracket using screws (C).
Micro-USB Bracket
2. Assemble expansion module to VESA mount on back of i-Series using screws (A) and (B). Connect the DC power and micro-USB connections as shown.
DC Jack
4. Connect power supply provided with expansion module to the DC jack on expansion module. Continue installation of i-Series Display as desired using stands and mounts available at www.elotouch.com.
Documents / Resources
 |
elo TOUCH SOLUTION E021201-E021388 Expansion Module [pdf] Installation Guide E021201, E021388, E021201-E021388 Expansion Module, E021201-E021388, Expansion Module, Module |
