ELINZ GPSTRACKPETS GPS Pet Tracker User Guide
Please read the installation guide carefully before use, so as to get the correct installation method and quick operation. If the appearance and color of the product are changed, please refer to the actual product! If the software content is updated, the documentation provided with the latest version of the software shall prevail. The company does not assume legal responsibility for the faults and omissions in the use process.
Product function parameters
Product features:
Location query, Track playback, Electronic fence, Low battery alarm, Light pet search, Sound pet search, etc.
(Different models with different functions, please refer to corresponding models.)
Performance parameters:
- Charging requirements: 5V DC – 1000mA;
- Location time: Average hot start: ≤3sec (opensky)
Average cold start: ≤35sec (opensky) - Positioning accuracy: ≤10 meters (open sky)
- Working temperature: -20℃-70℃.
(Please install and use correctly within the tolerance range of the equipment performance, if any illegal installation exceeds the equipment performance tolerance range, all the consequences caused by the user shall be borne by themselves! )
Product accessories and LED light status
Product accessories:
Standard: Main unit, Charging cable, Rubber buckle, Quick installation guide.
Terminal LED status
Red LED (power/charging indicator)
Yellow LED (network signal status)
Blue LED (positioning signal status)
Bright white LED (pet-seeking light status)
Terminal Instructions
Full set
1x gps tracker 4G
1x gift box
2x collar fixing silicone buckle
1x Magnet charging cable
Preparations before installation:
- Open the box, check whether the model of the device is correct and whether the accessories are complete, otherwise please contact your dealer.
- SIM card selection, the terminal needs to insert a standard SIM card and select the supported operator SIM card.
- For the installation of the SIM card, confirm the orientation of the SIM card according to the type of the SIM card slot of the device, and place the SIM card correctly.
Precautions:- Please turn off the terminal before installing or removing the SIM card.
- The terminal SIM card needs to enable the networking function and the tariff is normal.
SIM card installation
Unscrew the screw counterclockwise with the provided screwdriver, open the SIM card cover, insert the SIM card, then cover the SIM card cover and lock it tightly screw.Please refer to the below Picture 1-1 place of inerting the sim.
Precautions:
- The installation direction of the SIM card needs to be fastened correctly.
- The anti-rubber ring on the SIM card cover cannot be lost, otherwise it will affect the waterproof performance.
Charging
Insert one end of the charging cable into the charger that supports 5V, and attach the other end to the magnetic charging port of the device.
Then observe the device charging indicator. The red light is always on: charging; the red light is off: fully charged. Please refer to the above Picture 1-1 for the charging position.
Precautions:
- . Fully charge the device before using it for the first time.
- After charging is completed, please unplug the charger or the USB on the charger side first, and then unplug the magnetic charging connector on the device.
- When the charging cable is connected to the charger, the other end should not be attached to metal and conductive objects to avoid short circuit.
Switch the machine on and off
Power on: Press the power button for 1 second when the device is off, the work indicator lights up, and the device boots up successfully.
Shutdown: When the device is turned on, press and hold the power button for 3 seconds, the work indicator will flash quickly, and the device will be turned off. Please refer to the above Picture 1-1 for the on/off position.
Precautions:
If the battery is powered and not used for a long time, the battery is in a protected state, please charge it for half an hour before turning it on.
Fourth, the terminal operation instructions
SMS Instructions
The user uses the mobile phone to send the SMS instruction to the SIM card number of the positioning terminal (note that the SIM card needs to support the SMS function).
The comma in the following SMS instruction format is the English input status format, and the letters are case-sensitive according to the instruction requirements.
App operation
Login the tracking platform:
Users can log in to the global positioning service platform provided by the dealer to check the location and status of the vehicle.
For the service platform website, please consult your dealer.
login and check on web platform:
If individual users, please log in with the device ID number. The ID number is on the GPS device and packaging box. When logging in to the platform, please select IEIM/license plate number to log in. The default password is: 123456.
For enterprise users and fleet management users, please log in by user name. The user name and password are set by the dealer, please contact the respective dealer to assign.
Login by Mobile APP:
If Android system, please scan the QR code download, and if Apple mobile phone user can search the APP name in the Appstore to download.
If individual users, please log in by the GPS device ID number. The ID number is on the GPS device and packaging box. When logging in to the platform, please select IEIM/license plate number to log in. The default password is: 123456.
If enterprise users and fleet management users, please log in by user name. The user name and password are set by the dealer, please contact the respective dealer to assign.
Troubleshooting
Documents / Resources
 |
ELINZ GPSTRACKPETS GPS Pet Tracker [pdf] User Guide GPSTRACKPETS GPS Pet Tracker, GPSTRACKPETS, GPS Pet Tracker, Pet Tracker |