ESP32-CAM-MB Wi-Fi Bluetooth Camera Development Board Module
“
ESP32-CAM-MB WiFi Bluetooth Camera Development Board
Module
Specifications:
- Interface: Micro USB
- Processor: Dual-core 32-bit LX6 microprocessor
- Main Frequency: Up to 240 MHz
- Computing Power: Up to 600 DMIPS
- SPI Flash: 32mbit by default
- Internal SRAM: 520 KB
- External PSRAM: 4 MB/8 MB
- Wi-Fi: 802.11b/g/n/e/i
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Interface Support (2Mbps): UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Ports: 9
- Serial Port Rate: Default 115200bps
- Spectrum Range: 2400 ~ 2483.5 MHz
Product Usage Instructions:
1. Powering Up the Device:
Connect the ESP32-CAM-MB board to a power source using a Micro
USB cable.
2. Connecting to Wi-Fi and Bluetooth:
Follow the provided instructions to connect the board to a Wi-Fi
network and pair it with Bluetooth devices.
3. Image Capture and Transmission:
Utilize the integrated camera module to capture images and
transmit them as needed for your IoT projects.
4. Interfacing with IO Ports:
Utilize the various IO ports available on the board for
connecting external peripherals and sensors.
FAQ:
Q: What is the default serial port rate of the ESP32-CAM-MB
board?
A: The default serial port rate is 115200bps.
Q: What is the maximum TF card support of the board?
A: The board supports TF cards up to a maximum of 4GB.
“`
ESP32-CAM-MB
ESP32-CAM-MB WIFI bluetooth camera development board module
Catalogue
Products
1
Main Features
2
Product Parameters
3
Instructions for use
4
Products
The ESP32-CAM-MB WiFi Bluetooth Development Board is a multifunctional development board with an integrated ESP32 chip and camera module for IoT projects, especially those applications that require image capture and transmission.
The ESP32-CAM development board, features an ESP32-S chip, an OV2640 camera, micro SD card slot and several GPIOs for connecting peripherals.The module is a small-sized camera module that can work independently as the smallest system. The new WiFi+Bluetooth dual-mode development board designed based on ESP32 features an on-board PCB antenna, two high-performance 32-bit LX6 CPUs with 7-stage pipeline architecture, and an adjustable main frequency range of 80MHz to 240Mhz. ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module, with ultra-low power consumption, deep ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module with ultra-low power consumption and deep sleep current as low as 6mA, which makes it suitable for IoT applications with high power requirements. ESP32-CAM is a miniature module with camera function, equipped with OV2640 camera, GPIO for connecting peripherals, and micro-SD card for storing captured images, which can be directly plugged into the backplane.
As an IoT camera module based on the ESP32 chip, the ESP32-CAM-MB combines the functions of a microcontroller unit (MCU) and an image sensor, and is suitable for a wide range of application scenarios that require image capture and wireless transmission. It can be widely used in a variety of IoT occasions, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications, it is an ideal solution for IoT applications.
Performance
Interface:Micro USB Processor: Dual-core 32-bit LX6 microprocessor Main Frequency: Up to 240 MHz Computing power: up to 600 DMIPS SPI Flash: 32mbit by default Internal SRAM: 520 KB External PSRAM: 4 MB/8 MB Wi-Fi: 802.11b / G / n / e / i Bluetooth: Bluetooth 4.2BR/EDR and BLE standards Interface support (2Mbps): UART, SPI, I2C, PWM TF card support: Maximum 4G IO ports: 9 Serial Port Rate: Default 115200bps Spectrum range: 2400 ~ 2483.5 MHz
Camera Sensor: OV2640 image sensor, 2MP Image Output Format: JPEG (only support OV2640), BMP, GRAYSCALE Transmit power: 802.11b: 17 ± 2dBm (@ 11mbps) 802.11g: 14 ± 2dBm (@ 54mbps) 802.11n: 13 ± 2dBm (@ MCS7) Receive sensitivity: CCK, 1mbps: -90dBm CCK, 11mbps: -85dBm 6Mbps (1 / 2BPSK): -88dBm 54Mbps (3/464-QAM): -70dBm MCS7 (65Mbps, 72.2 Mbps): -67dBm
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
Electrobes ESP32-CAM-MB Wi-Fi Bluetooth Camera Development Board Module [pdf] User Manual ESP32-CAM, ESP32-CAM-MB Wi-Fi Bluetooth Camera Development Board Module, ESP32-CAM-MB, Wi-Fi Bluetooth Camera Development Board Module, Bluetooth Camera Development Board Module, Camera Development Board Module, Development Board Module, Board Module, Module |