
Quick Start Guide


Cookware

Great options
- Cast Iron
- Enameled Cast Iron
- Carbon Steel
- Stainless Steel
- Steel-Based Nonstick
Quick compatibility test
If a magnet sticks to the bottom of your pan, it will work on Electra.
Pan size
Smaller pans work great on larger burners.
Larger pans might need extra preheat time on small burners.
Pro tip
Look for the universal induction symbol on the bottom of pans as another quick way to check if they will work on Electra.

Using the stovetop

Pro tip
Use the LED indicators on the stovetop to quickly check your power level without having to glance down at the knobs.
![]()
Burner power

High Power Burner
The bottom-left and top right burners are 2x the power and best for high heat cooking like searing and boiling water.
Standard Burner
The top-left and bottom-right burners will give you more precise control at lower temperatures. Keep in mind: an 8 here is the same as a 4 on a high power burner.
Knob levels

Electra’s power levels are designed to feel familiar if you’re coming from gas.
Because induction is more efficient, “Medium” appears earlier on the dial to keep your recipes consistent.
MAX is ideal for boiling and searing.
Stovetop safety

Pro tip
Your pans will heat up much faster than on gas or electric. Keep an eye on oil or other cooking fats – they reach cooking temperature quickly!
No Pan Indicator
If you lift a pan while the burner is on, you’ll see a “U” symbol. The burner will pause and automatically resume when you replace the pan.

Hot Surface Indicator
After turning off a burner, you may see an “H” symbol, indicating the surface is too hot to touch.

Overheat Protection
If you forget a pan on the cooktop, Electra automatically cuts power when the temperature gets too high.
Using the oven

Pro tip
Hit the Start button 4 times in a row to quickly start pre-heating the oven in the mode that was last used (Bake is the default). ![]()
Baking
- Press
to open oven controls. - Press
to navigate the modes,
to confirm. - Press / hold
to set temperature,
to confirm. - Optional: Press / hold
to set a cook time. - Press
to start baking. - Press
to turn off all oven functions.
Timer
- Press
to open timer controls. - Press / hold
to set time,
to start timer. - To stop the timer, press
again.
Bake modes

Pro tip
Electra automatically uses extra power for preheating when available, cutting wait times by about one-third. Be aware that the convection fan and heating element may turn on during preheating even in non-convection modes.
Bake
Your standard baking mode that uses the bottom heating element without the convection fan
Convection Bake
Adds the convection fan and heating element for a more even bake and faster results
Convection Roast
Combines the top, bottom and convection heating elements with the fan for an air-fryer like crisp
Pizza
A custom baking mode designed to ensure crust bakes evenly and cheese melts without burning
Warm
Maintains oven temperature at 175F to keep food warm
Broil
Delivers high heat from the top element. Ideal for browning or finishing a dish
First steps
After your stove is installed, please:
- Locate the On/OFF switch on the right side of the battery tray. It is approximately 2 inches behind the front right foot of the stove.
- Flip the switch toward you to turn the stove on.
- Wait to hear a sequence of beeps confirming the stove is on and ready for you to start connecting to WiFi.

Set the time
- Press
on the control panel to open settings. - Use
to navigate to “CLO” if it’s not already visible. - Press
to enter edit mode. - Next, use to set the current time.
- Press
to confirm.
Disable button sound (optional)
- Press
to open settings. - Use
to navigate to “Son” for sound. Press
to enter edit mode. - Next. press
to toggle “Off” - Finally, press
to confirm.
Smart features

Pro tip
For almost all use cases, you don’t have to think about the battery. A typical one-day use is about 20% of the battery’s capacity and Electra will automatically recharge when energy is cleanest.
Breaker Saver and Clean Charging
To dial in when the stove charges, connect Electra to your home WiFi (Detailed instructions on next page). Now you can:
Select
Select the amount of power Electra draws from the wall to avoid tripping your breaker.
Schedule
Schedule charging for when energy is cheapest and cleanest.
Choose
Choose the threshold at which fast charging begins.
Connect
Connect to receive firmware updates and remote support.
Connecting to WiFi
- Navigate to your device’s WiFi settings and join “electra-#”
Once joined, your device should automatically launch the login page. If it does not, go to wifi.electra.com in a browser.
- Follow the instructions to confirm the zip code where your Electra stove is installed.

- Next, you will be prompted to select your home network and input your WiFi password.

- Your stove is now connected to WiFi and you can use all of the smart features.
In a web browser, navigate to http://electra.local to access the Electra web app.

Enjoy!

By choosing Electra, you’re investing in better cooking, healthier air in your home, and a more sustainable future for us all.
Electra is designed to use energy when it’s cheapest and cleanest-reducing strain on aging energy infrastructure and giving you the resilience to cook through a power outage.
We built Electra for the long haul. If you ever need us, don’t hesitate to reach out-you can email us at support@electra.com or call +1-909-ELECTRA.
Warmly,


To learn more, visit electra.com/support
Documents / Resources
![]() | Induction Stove |
References
- electra.com/supportelectra.com
- electra.localelectra.local
- wifi.electra.comwifi.electra.com
- User Manualmanual.tools

The fan comes on and stays on when using the stovetop. Is there a way to control that? It is quite noisy and not always needed.
How can I control or turn off the fan on the ELECTRA induction stovetop?
Based on the ELECTRA Induction Stove User Guide, there is no manual control for the internal cooling fan. In induction appliances, the fan is a critical safety component that automatically activates to cool the internal electronics and the induction coils during and after use.
While the manual does not provide a way to disable the fan, it does note the following regarding fan behavior:
If you believe the fan noise is excessive or if it never turns off even when the unit is cool, you should contact Electra support at support@electra.com or call +1-909-ELECTRA for further assistance.
Read the full Q&A page