Elecrow RPI5 Mini PC Case

Product Information

Specifications

• Supported SSD sizes: 2230, 2242, 2260, 2280
• Mini PC Case Compatibility: Raspberry Pi 5
• Additional Components: PCIE to SSD Adapter Board, TF card adapter, GPIO adapter, fans, OLED module, CR1220 battery

Product Usage Instructions

Preparation

1. Ensure you have all components ready: Raspberry Pi 5, PCIE to SSD Adapter Board, TF card adapter, GPIO adapter, etc.
2. Prepare the necessary tools: screwdriver, black silicone pad.

Assembly Steps

1. Follow the provided diagrams for Mini PC case assembly.
2. Install the SSD (if needed) using the provided installation diagram.
3. Connect the necessary cables according to the connection diagrams.
4. Install the fans and other components based on the provided installation diagrams.
5. Complete the assembly ensuring all components are securely in place.

Note:
Metal_Switch Function: displays Power Off, and the system waits for 5s before shutting down.

Additional Resources:

Firmware, system services, and installation QR code/link:
Download Here

PREOARATION

ASSEMBLY STEPS

The solid-state drive (SSD) should be purchased separately.Supported SSD sizes: 2230,2242, 2260, 2280. If you do not need to assemble the SSD, you can ignore this step

1. Assemble the fans as shown in the figure:
2. fans F with stickers facing inward, 1 fan G with sticker facing outward.

Connect the red wire to LED+, the black wire to LED-,and the grey wires to SW+ and SW- in any order.

Mini PC Case Assembly Guide for Jetson Orin Nano

Preparation

Assembly Steps

Black to LED-, red to LED+, gray to PWR BTN & GND (no order).

Note:

Metal _ Switch Function:

• Short Press (Is):power on.
• Long Press (5s) and Release:The screen displays “Power Off,” and the system waits for 5s before shutting down.

Firmware, system services,and installation QR code/link:

https://drive.google.com/drive/folders/14QB_eCKqBgupROOfekWJwF35kZT6SiLa?usp=sharing

FAQs

Do I need to purchase the SSD separately?

Yes, the solid-state drive (SSD) should be purchased separately. Supported SSD sizes are 2230, 2242, 2260, 2280.

What components are included in the package?

The package includes Mini PC case components, Raspberry Pi 5,PCIE to SSD Adapter Board, TF card adapter, GPIO adapter, fans, OLED module, CR1220 battery.

Documents / Resources

Elecrow RPI5 Mini PC Case [pdf] Instruction Manual RPI5, RPI5 Mini PC Case, RPI5, Mini PC Case, PC Case, Case

References

• User Manual