Farelek Alaska Air Cooler
This manual provides instructions for the Farelek Alaska Air Cooler.
Introduction
The Farelek Alaska is an air cooler designed to provide cooling and air circulation. This document contains original instructions and translations into multiple languages.
Machine Components
The air cooler consists of the following main parts:
- Top Panel
- Front Panel
- Water Tank
- Air Filter
- Control Panel
- Fan
- Motor
- Wheels (x4)
- Ice Packs (x2)
Refer to the diagrams for the location of these components.
Assembly Instructions
Step 1: Attach Wheels
Attach the four wheels (08) to the base of the machine. You will hear a 'CLIC!' sound when they are properly secured.
Step 2: Power Connection
Ensure the unit is OFF before connecting to power.
Operating the Air Cooler
Filling the Water Tank:
Before filling, unplug the power cord and remove the drain plug from the top water tank. Do not overfill the top tank. Monitor the lower tank to ensure it does not exceed the maximum level. Once the lower tank is filled, reinsert the drain plug.
Powering On:
Connect the power cord and turn the unit ON.
Functions:
- Cool: Activates the cooling function.
- Fan Speeds: Select between Low, Mid, and High fan speeds.
- Swing: Enables oscillation for wider air distribution.
Cooling Mechanism
The air cooler uses a cooling system that involves ice packs. Place the ice packs (09) in a freezer at -20°C before use. Once frozen, insert them into the designated compartment within the air cooler.
Maintenance and Cleaning
Regular cleaning is recommended to maintain performance. This includes cleaning the air filter. The air cooler requires water (H₂O) in its tank for the cooling function.
Technical Specifications
| Specification | Value |
|---|---|
| Voltage / Frequency | 230 V ~ 50 Hz |
| Power Consumption | 65 W Max |
| Fan Flow Rate | 5.7 m³/min |
| Fan Power Input | 62.0 W |
| Service Value | 0.092 (m³/min)/W |
| Standby Power Consumption | 0 W |
| Fan Sound Power Level | 60.8 dB(A) |
| Seasonal Electricity Consumption | 19.8 kWh/a |
| Tank Capacity | 6 L |
| IP Rating | IP X0 |
| Weight | 5.5 kg |
Safety and Compliance
Safety Precautions:
- Read all instructions before use.
- Do not operate if the power cord is damaged.
Compliance:
The product conforms to European CE standards and relevant directives.
Warranty and Service
This tool is guaranteed contractually against any construction or material defects for one year from the date of sale, upon presentation of the sales receipt. The warranty covers the replacement of faulty parts. It does not apply to damage caused by non-conforming use, unauthorized interventions, negligence, or failure of the tool.
For service after sale, contact FARGROUP EUROPE.
Manufacturer Information
FAR GROUP EUROPE
A company of the SIGMA group
192, Avenue Yves Farge
37700 St. Pierre-des-Corps
FRANCE
Website: www.fartools.com
